From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Mon, 29 Feb 2016 20:42:55 -0800 Subject: [PATCH 2/2] pinctrl: sunxi: Change mux setting on PI irq pins In-Reply-To: References: Message-ID: <20160301044255.GD8418@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Feb 29, 2016 at 12:13:27AM +0100, Henry Paulissen wrote: > While I was testing irq's on the cubietruck I found a couple of > not working irq pins. Further diving into the problem it opened > up a mess called "manual". > > This so called manual (A20 user manual v1.3 dated 2014-10-10) says: > > Pin overview: > Page 237: EINT26 is on mux 5. > Page 288: EINT26 is on mux 6. > > The manual is so contradicting that further tests had to be made > to see which of the 2 statements where correct. > > This patch is based on actual outcome of these tests and not what > the manual says. > > Test procedure used: > > Connect a 1 pulse per second (GPS) line to the pin. > > echo pin### > /sys/class/gpio/export > echo in > /sys/class/gpio/gpio###/direction > echo rising > /sys/class/gpio/gpio###/edge > > Check /proc/interrupts if a irq was attached and if irq's where > received. > > Hardware used: > Henry Paulissen: Cubietruck > Andere Przywara: BananaPi M1 > > Tested-by: Andre Przywara > Reviewed-by: Andre Przywara > Signed-off-by: Henry Paulissen Acked-by: Maxime Ripard Thanks ! -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: Digital signature URL: