From: robh@kernel.org (Rob Herring)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V7 1/2] regulator: Add document for MT6323 regulator
Date: Wed, 2 Mar 2016 12:07:28 -0600 [thread overview]
Message-ID: <20160302180728.GA21394@rob-hp-laptop> (raw)
In-Reply-To: <1456396631-12788-1-git-send-email-blogic@openwrt.org>
On Thu, Feb 25, 2016 at 11:37:10AM +0100, John Crispin wrote:
> Signed-off-by: John Crispin <blogic@openwrt.org>
> Cc: devicetree at vger.kernel.org
> ---
> This patch needs to be merged post-rc1 as it depends on the MFD series of
> the PMIC which is already inside Lee's tree pending the PR.
Why? It is an indpendent change with no actual dependency.
>
> Changes in V7
> * remove another compatible string
> * small wording changes
>
> Changes in V6
> * remove the compatible string
>
> Changes in V5
> * regulator vs regulators
>
> Changes in V4
> * regulator is a subnode and not a property
>
> .../bindings/regulator/mt6323-regulator.txt | 239 ++++++++++++++++++++
> 1 file changed, 239 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
Acked-by: Rob Herring <robh@kernel.org>
>
> diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
> new file mode 100644
> index 0000000..9fd95e7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
> @@ -0,0 +1,239 @@
> +Mediatek MT6323 Regulator Driver
> +
> +All voltage regulators are defined as subnodes of the regulators node. A list
> +of regulators provided by this controller are defined as subnodes of the
> +PMIC's node. Each regulator is named according to its regulator type,
> +buck_<name> and ldo_<name>. The definition for each of these nodes is defined
> +using the standard binding for regulators at
> +Documentation/devicetree/bindings/regulator/regulator.txt.
> +
> +The valid names for regulators are::
> +BUCK:
> + buck_vproc, buck_vsys, buck_vpa
> +LDO:
> + ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama,
> + ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2,
> + ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr,
> + ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio
> +
> +Example:
> +
> + pmic: mt6323 {
> + compatible = "mediatek,mt6323";
> +
> + mt6323regulator: regulators {
> + mt6323_vproc_reg: buck_vproc{
> + regulator-name = "vproc";
> + regulator-min-microvolt = < 700000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <12500>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + mt6323_vsys_reg: buck_vsys{
> + regulator-name = "vsys";
> + regulator-min-microvolt = <1400000>;
> + regulator-max-microvolt = <2987500>;
> + regulator-ramp-delay = <25000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + mt6323_vpa_reg: buck_vpa{
> + regulator-name = "vpa";
> + regulator-min-microvolt = < 500000>;
> + regulator-max-microvolt = <3650000>;
> + };
> +
> + mt6323_vtcxo_reg: ldo_vtcxo{
> + regulator-name = "vtcxo";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <90>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + mt6323_vcn28_reg: ldo_vcn28{
> + regulator-name = "vcn28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <185>;
> + };
> +
> + mt6323_vcn33_bt_reg: ldo_vcn33_bt{
> + regulator-name = "vcn33_bt";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-enable-ramp-delay = <185>;
> + };
> +
> + mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
> + regulator-name = "vcn33_wifi";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3600000>;
> + regulator-enable-ramp-delay = <185>;
> + };
> +
> + mt6323_va_reg: ldo_va{
> + regulator-name = "va";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <216>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + mt6323_vcama_reg: ldo_vcama{
> + regulator-name = "vcama";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <216>;
> + };
> +
> + mt6323_vio28_reg: ldo_vio28{
> + regulator-name = "vio28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <216>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + mt6323_vusb_reg: ldo_vusb{
> + regulator-name = "vusb";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <216>;
> + regulator-boot-on;
> + };
> +
> + mt6323_vmc_reg: ldo_vmc{
> + regulator-name = "vmc";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <36>;
> + regulator-boot-on;
> + };
> +
> + mt6323_vmch_reg: ldo_vmch{
> + regulator-name = "vmch";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <36>;
> + regulator-boot-on;
> + };
> +
> + mt6323_vemc3v3_reg: ldo_vemc3v3{
> + regulator-name = "vemc3v3";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <36>;
> + regulator-boot-on;
> + };
> +
> + mt6323_vgp1_reg: ldo_vgp1{
> + regulator-name = "vgp1";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <216>;
> + };
> +
> + mt6323_vgp2_reg: ldo_vgp2{
> + regulator-name = "vgp2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <216>;
> + };
> +
> + mt6323_vgp3_reg: ldo_vgp3{
> + regulator-name = "vgp3";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <216>;
> + };
> +
> + mt6323_vcn18_reg: ldo_vcn18{
> + regulator-name = "vcn18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <216>;
> + };
> +
> + mt6323_vsim1_reg: ldo_vsim1{
> + regulator-name = "vsim1";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <216>;
> + };
> +
> + mt6323_vsim2_reg: ldo_vsim2{
> + regulator-name = "vsim2";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <216>;
> + };
> +
> + mt6323_vrtc_reg: ldo_vrtc{
> + regulator-name = "vrtc";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + mt6323_vcamaf_reg: ldo_vcamaf{
> + regulator-name = "vcamaf";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <216>;
> + };
> +
> + mt6323_vibr_reg: ldo_vibr{
> + regulator-name = "vibr";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-enable-ramp-delay = <36>;
> + };
> +
> + mt6323_vrf18_reg: ldo_vrf18{
> + regulator-name = "vrf18";
> + regulator-min-microvolt = <1825000>;
> + regulator-max-microvolt = <1825000>;
> + regulator-enable-ramp-delay = <187>;
> + };
> +
> + mt6323_vm_reg: ldo_vm{
> + regulator-name = "vm";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <216>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + mt6323_vio18_reg: ldo_vio18{
> + regulator-name = "vio18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <216>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + mt6323_vcamd_reg: ldo_vcamd{
> + regulator-name = "vcamd";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <216>;
> + };
> +
> + mt6323_vcamio_reg: ldo_vcamio{
> + regulator-name = "vcamio";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <216>;
> + };
> + };
> + };
> --
> 1.7.10.4
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-03-02 18:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 10:37 [PATCH V7 1/2] regulator: Add document for MT6323 regulator John Crispin
2016-02-25 10:37 ` [PATCH V7 2/2] regulator: mt6323: Add support " John Crispin
2016-02-26 2:10 ` Mark Brown
2016-03-02 18:07 ` Rob Herring [this message]
2016-03-02 18:13 ` [PATCH V7 1/2] regulator: Add document " John Crispin
-- strict thread matches above, loose matches on Subject: below --
2016-02-22 12:56 John Crispin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160302180728.GA21394@rob-hp-laptop \
--to=robh@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox