[PATCH 1/3] [media] rc: sunxi-cir: support module autoloading

[PATCH 1/3] [media] rc: sunxi-cir: support module autoloading

[Emilio López]

From: Emilio L?pez <emilio.lopez@collabora.co.uk>

MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on
systems supporting infrared. This commit adds the missing line so it
works out of the box when built as a module and running on a sunxi
system with an infrared receiver.

Signed-off-by: Emilio L?pez <emilio.lopez@collabora.co.uk>
---
 drivers/media/rc/sunxi-cir.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/rc/sunxi-cir.c b/drivers/media/rc/sunxi-cir.c
index 40f7768..eaadc08 100644
--- a/drivers/media/rc/sunxi-cir.c
+++ b/drivers/media/rc/sunxi-cir.c
@@ -326,6 +326,7 @@ static const struct of_device_id sunxi_ir_match[] = {
 	{ .compatible = "allwinner,sun5i-a13-ir", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, sunxi_ir_match);
 
 static struct platform_driver sunxi_ir_driver = {
 	.probe          = sunxi_ir_probe,
-- 
2.7.1

[PATCH 2/3] dmaengine: sun4i: support module autoloading

[Emilio López]

From: Emilio L?pez <emilio.lopez@collabora.co.uk>

MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on
supported systems. This commit adds the missing line so it loads
automatically when building it as a module and running on a system
with the early sunxi DMA engine.

Signed-off-by: Emilio L?pez <emilio.lopez@collabora.co.uk>
---
 drivers/dma/sun4i-dma.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/dma/sun4i-dma.c b/drivers/dma/sun4i-dma.c
index 1661d518..e0df233 100644
--- a/drivers/dma/sun4i-dma.c
+++ b/drivers/dma/sun4i-dma.c
@@ -1271,6 +1271,7 @@ static const struct of_device_id sun4i_dma_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-dma" },
 	{ /* sentinel */ },
 };
+MODULE_DEVICE_TABLE(of, sun4i_dma_match);
 
 static struct platform_driver sun4i_dma_driver = {
 	.probe	= sun4i_dma_probe,
-- 
2.7.1

[PATCH 3/3] usb: musb: sunxi: support module autoloading

[Emilio López]

From: Emilio L?pez <emilio.lopez@collabora.co.uk>

MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on
sunxi systems using the OTG controller. This commit adds the missing
line so it loads automatically when building it as a module and running
on a system with an USB OTG port.

Signed-off-by: Emilio L?pez <emilio.lopez@collabora.co.uk>
---
 drivers/usb/musb/sunxi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index d9b0dc4..fdab423 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -752,6 +752,7 @@ static const struct of_device_id sunxi_musb_match[] = {
 	{ .compatible = "allwinner,sun8i-a33-musb", },
 	{}
 };
+MODULE_DEVICE_TABLE(of, sunxi_musb_match);
 
 static struct platform_driver sunxi_musb_driver = {
 	.probe = sunxi_musb_probe,
-- 
2.7.1

[PATCH 1/3] [media] rc: sunxi-cir: support module autoloading

[Javier Martinez Canillas]

Hello Emilio,

On Sun, Feb 21, 2016 at 10:26 PM, Emilio L?pez <emilio@elopez.com.ar> wrote:
> From: Emilio L?pez <emilio.lopez@collabora.co.uk>
>
> MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on
> systems supporting infrared. This commit adds the missing line so it
> works out of the box when built as a module and running on a sunxi
> system with an infrared receiver.
>
> Signed-off-by: Emilio L?pez <emilio.lopez@collabora.co.uk>

Looks good to me.

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
Javier

[PATCH 2/3] dmaengine: sun4i: support module autoloading

[Javier Martinez Canillas]

Hello Emilio,

On Sun, Feb 21, 2016 at 10:26 PM, Emilio L?pez <emilio@elopez.com.ar> wrote:
> From: Emilio L?pez <emilio.lopez@collabora.co.uk>
>
> MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on
> supported systems. This commit adds the missing line so it loads
> automatically when building it as a module and running on a system
> with the early sunxi DMA engine.
>
> Signed-off-by: Emilio L?pez <emilio.lopez@collabora.co.uk>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
Javier

[PATCH 3/3] usb: musb: sunxi: support module autoloading

[Javier Martinez Canillas]

Hello Emilio,

On Sun, Feb 21, 2016 at 10:26 PM, Emilio L?pez <emilio@elopez.com.ar> wrote:
> From: Emilio L?pez <emilio.lopez@collabora.co.uk>
>
> MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on
> sunxi systems using the OTG controller. This commit adds the missing
> line so it loads automatically when building it as a module and running
> on a system with an USB OTG port.
>
> Signed-off-by: Emilio L?pez <emilio.lopez@collabora.co.uk>
> ---

Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

Best regards,
Javier

[PATCH 2/3] dmaengine: sun4i: support module autoloading

[Vinod Koul]

On Sun, Feb 21, 2016 at 10:26:35PM -0300, Emilio L?pez wrote:
> From: Emilio L?pez <emilio.lopez@collabora.co.uk>
> 
> MODULE_DEVICE_TABLE() is missing, so the module isn't auto-loading on
> supported systems. This commit adds the missing line so it loads
> automatically when building it as a module and running on a system
> with the early sunxi DMA engine.

Applied, thanks

-- 
~Vinod