[PATCH 0/3] ARM: OMAP3: Fix McBSP2/3 hwmod setup for sidetone

[tony@atomide.com (Tony Lindgren)]

* Peter Ujfalusi <peter.ujfalusi@ti.com> [160322 01:54]:
> Tony,
> 
> On 03/21/16 22:21, Tony Lindgren wrote:
> > Hi,
> > 
> > * Peter Ujfalusi <peter.ujfalusi@ti.com> [160321 01:39]:
> >>
> >> This is also interesting:
> >> McBSP2 sidetone is in region 39 and 40 (module and L4 interconnect) which is
> >> unique in case of OMAP34xx and OMAP35xx, but it is overlapping with GPIO6 on
> >> OMAP36xx. Not sure what are the implications.
> > 
> > Hmm GPIO6 is in a different L4 segment though? Maybe
> > you did not account for the segments?
> > 
> > 0x49000000 + 0x20000 + 0x2000/0x4000/0x6000 for McBSP
> > 0x49000000 + 0x50000 + 0x8000 for GPIO6
> > 
> > Or maybe I don't understand at which physical address the
> > overlap is? :)
> 
> The addresses are not overlapping, but the Region Numbers for GPIO6 and McBSP2
> sidetone in Table 9-114 "Region Allocation for
> L4-Per Interconnect". But only in case of OMAP36xx

Oh OK, yeah the TRM region numbers are wrong, they skip unused
entries compared to the hardware AP table :) Basically the
TRM AP region numbering is useless and wrong.

Regards,

Tony