linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: bjorn.andersson@linaro.org (Bjorn Andersson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/12] ARM: dts: dragonboard-600c: add pcie support
Date: Tue, 29 Mar 2016 07:39:58 -0700	[thread overview]
Message-ID: <20160329143958.GL8929@tuxbot> (raw)
In-Reply-To: <1458762471-9676-1-git-send-email-srinivas.kandagatla@linaro.org>

On Wed 23 Mar 12:47 PDT 2016, Srinivas Kandagatla wrote:

> This patch adds pcie and regulators required to get on board ATL1C
> ethernet working.
> ---

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

>  .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 36 ++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
> index 5374510..d3e6193 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts
> @@ -20,6 +20,16 @@
>  			regulator-type = "voltage";
>  			regulator-boot-on;
>  		};
> +
> +		/* on board fixed 3.3v supply */
> +		vcc3v3: vcc3v3 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "VCC3V3";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +		};
> +
>  	};
>  
>  	soc {
> @@ -31,6 +41,18 @@
>  					bias-disable;
>  				};
>  			};
> +
> +			pcie_pins: pcie_pinmux {
> +				mux {
> +					pins = "gpio27";
> +					function = "gpio";
> +				};
> +				conf {
> +					pins = "gpio27";
> +					drive-strength = <12>;
> +					bias-disable;
> +				};
> +			};
>  		};
>  
>  		rpm at 108000 {
> @@ -109,6 +131,10 @@
>  					regulator-max-microvolt = <1900000>;
>  					bias-pull-down;
>  				};
> +
> +				lvs6 {
> +					bias-pull-down;
> +				};
>  			};
>  		};
>  
> @@ -135,6 +161,16 @@
>  			};
>  		};
>  
> +		pci at 1b500000 {
> +			status = "okay";
> +			vdda-supply = <&pm8921_s3>;
> +			vdda_phy-supply = <&pm8921_lvs6>;
> +			vdda_refclk-supply = <&vcc3v3>;
> +			pinctrl-0 = <&pcie_pins>;
> +			pinctrl-names = "default";
> +			perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
> +		};
> +
>  		/* OTG */
>  		phy at 12500000 {
>  			status		= "okay";
> -- 
> 2.5.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2016-03-29 14:39 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-23 19:46 [PATCH 00/12] ARM: dts: Add dragonboard-600c support Srinivas Kandagatla
2016-03-23 19:47 ` [PATCH 01/12] ARM: dts: apq8064: fix the pinctrls for i2c and spi Srinivas Kandagatla
2016-03-29 14:28   ` Bjorn Andersson
2016-03-29 15:02     ` Srinivas Kandagatla
2016-03-29 16:10       ` Bjorn Andersson
2016-03-23 19:47 ` [PATCH 02/12] ARM: dts: apq8064: add support to gsbi1 uart Srinivas Kandagatla
2016-03-29 14:29   ` Bjorn Andersson
2016-03-23 19:47 ` [PATCH 03/12] ARM: dts: apq8064: add gsbi7 i2c support Srinivas Kandagatla
2016-03-29 14:34   ` Bjorn Andersson
2016-03-23 19:47 ` [PATCH 04/12] ARM: dts: dragonboard-600c: add board support with serial Srinivas Kandagatla
2016-03-23 20:07   ` Stephen Boyd
2016-03-23 20:30     ` Srinivas Kandagatla
2016-03-24  1:04       ` Bjorn Andersson
2016-03-24  1:48         ` Stephen Boyd
2016-03-24 12:49           ` Arnd Bergmann
2016-03-24 20:50           ` Nicolas Dechesne
2016-03-29 19:00             ` Stephen Boyd
2016-03-29 14:21           ` Bjorn Andersson
2016-03-23 19:47 ` [PATCH 05/12] ARM: dts: dragonboard-600c: add pmic regulator supplies Srinivas Kandagatla
2016-03-29 14:37   ` Bjorn Andersson
2016-03-29 15:02     ` Srinivas Kandagatla
2016-03-23 19:47 ` [PATCH 06/12] ARM: dts: dragonboard-600c: Add eMMC and SD card support Srinivas Kandagatla
2016-03-29 14:38   ` Bjorn Andersson
2016-03-29 15:02     ` Srinivas Kandagatla
2016-03-23 19:47 ` [PATCH 07/12] ARM: dts: dragonboard-600c: add usb support Srinivas Kandagatla
2016-03-29 14:39   ` Bjorn Andersson
2016-03-23 19:47 ` [PATCH 08/12] ARM: dts: dragonboard-600c: add pcie support Srinivas Kandagatla
2016-03-29 14:39   ` Bjorn Andersson [this message]
2016-03-23 19:47 ` [PATCH 09/12] ARM: dts: dragonboard-600c: add on board sata support Srinivas Kandagatla
2016-03-29 14:40   ` Bjorn Andersson
2016-03-23 19:48 ` [PATCH 10/12] ARM: dts: dragonboard-600c: Add on board leds support Srinivas Kandagatla
2016-03-24 16:51   ` Nicolas Dechesne
2016-03-29 13:30     ` Srinivas Kandagatla
2016-03-27  5:50   ` Bjorn Andersson
2016-03-29 14:20     ` Srinivas Kandagatla
2016-03-29 14:51       ` Bjorn Andersson
2016-03-29 18:32         ` Nicolas Dechesne
2016-03-29 21:10           ` Bjorn Andersson
2016-03-30 12:54     ` Rob Herring
2016-03-23 19:48 ` [PATCH 11/12] ARM: dts: dragonboard-600c: add i2c support Srinivas Kandagatla
2016-03-29 14:44   ` Bjorn Andersson
2016-03-29 15:02     ` Srinivas Kandagatla
2016-03-23 19:48 ` [PATCH 12/12] ARM: dts: dragonboard-600c: add spi support Srinivas Kandagatla
2016-03-29 14:54 ` [PATCH 00/12] ARM: dts: Add dragonboard-600c support Bjorn Andersson
2016-03-29 15:02   ` Srinivas Kandagatla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160329143958.GL8929@tuxbot \
    --to=bjorn.andersson@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).