From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 09/45] KVM: arm/arm64: vgic-new: Add GICv2 IRQ sync/flush
Date: Thu, 31 Mar 2016 11:47:15 +0200 [thread overview]
Message-ID: <20160331094715.GA20251@cbox> (raw)
In-Reply-To: <1458871508-17279-10-git-send-email-andre.przywara@arm.com>
On Fri, Mar 25, 2016 at 02:04:32AM +0000, Andre Przywara wrote:
> From: Marc Zyngier <marc.zyngier@arm.com>
>
> Implement the functionality for syncing IRQs between our emulation
> and the list registers, which represent the guest's view of IRQs.
> This is done in kvm_vgic_flush_hwstate and kvm_vgic_sync_hwstate,
> which gets called on guest entry and exit.
>
> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
> Signed-off-by: Eric Auger <eric.auger@linaro.org>
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
> include/kvm/vgic/vgic.h | 4 +
> virt/kvm/arm/vgic/vgic-v2.c | 161 ++++++++++++++++++++++++++++++++++
> virt/kvm/arm/vgic/vgic.c | 204 ++++++++++++++++++++++++++++++++++++++++++++
> virt/kvm/arm/vgic/vgic.h | 4 +
> 4 files changed, 373 insertions(+)
>
> diff --git a/include/kvm/vgic/vgic.h b/include/kvm/vgic/vgic.h
> index f32b284..986f23f 100644
> --- a/include/kvm/vgic/vgic.h
> +++ b/include/kvm/vgic/vgic.h
> @@ -187,6 +187,10 @@ int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int intid,
> #define vgic_valid_spi(k,i) (((i) >= VGIC_NR_PRIVATE_IRQS) && \
> ((i) < (k)->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS))
>
> +bool kvm_vcpu_has_pending_irqs(struct kvm_vcpu *vcpu);
> +void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu);
> +void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu);
> +
> /**
> * kvm_vgic_get_max_vcpus - Get the maximum number of VCPUs allowed by HW
> *
> diff --git a/virt/kvm/arm/vgic/vgic-v2.c b/virt/kvm/arm/vgic/vgic-v2.c
> index 0bf6f27..1cec423 100644
> --- a/virt/kvm/arm/vgic/vgic-v2.c
> +++ b/virt/kvm/arm/vgic/vgic-v2.c
> @@ -14,11 +14,172 @@
> * along with this program. If not, see <http://www.gnu.org/licenses/>.
> */
>
> +#include <linux/irqchip/arm-gic.h>
> #include <linux/kvm.h>
> #include <linux/kvm_host.h>
>
> #include "vgic.h"
>
> +/*
> + * Call this function to convert a u64 value to an unsigned long * bitmask
> + * in a way that works on both 32-bit and 64-bit LE and BE platforms.
> + *
> + * Warning: Calling this function may modify *val.
> + */
> +static unsigned long *u64_to_bitmask(u64 *val)
> +{
> +#if defined(CONFIG_CPU_BIG_ENDIAN) && BITS_PER_LONG == 32
> + *val = (*val >> 32) | (*val << 32);
> +#endif
> + return (unsigned long *)val;
> +}
> +
> +void vgic_v2_process_maintenance(struct kvm_vcpu *vcpu)
> +{
> + struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2;
> +
> + if (cpuif->vgic_misr & GICH_MISR_EOI) {
> + u64 eisr = cpuif->vgic_eisr;
> + unsigned long *eisr_bmap = u64_to_bitmask(&eisr);
> + int lr;
> +
> + for_each_set_bit(lr, eisr_bmap, vcpu->arch.vgic_cpu.nr_lr) {
> + struct vgic_irq *irq;
> + u32 intid = cpuif->vgic_lr[lr] & GICH_LR_VIRTUALID;
> +
> + irq = vgic_get_irq(vcpu->kvm, vcpu, intid);
> +
> + WARN_ON(irq->config == VGIC_CONFIG_EDGE);
> + WARN_ON(cpuif->vgic_lr[lr] & GICH_LR_STATE);
> +
> + kvm_notify_acked_irq(vcpu->kvm, 0,
> + intid - VGIC_NR_PRIVATE_IRQS);
> +
> + cpuif->vgic_lr[lr] &= ~GICH_LR_STATE; /* Useful?? */
> + cpuif->vgic_elrsr |= 1ULL << lr;
> + }
> + }
> +
> + /* check and disable underflow maintenance IRQ */
> + cpuif->vgic_hcr &= ~GICH_HCR_UIE;
> +
> + /*
> + * In the next iterations of the vcpu loop, if we sync the
> + * vgic state after flushing it, but before entering the guest
> + * (this happens for pending signals and vmid rollovers), then
> + * make sure we don't pick up any old maintenance interrupts
> + * here.
> + */
> + cpuif->vgic_eisr = 0;
> +}
> +
> +void vgic_v2_set_underflow(struct kvm_vcpu *vcpu)
> +{
> + struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2;
> +
> + cpuif->vgic_hcr |= GICH_HCR_UIE;
> +}
> +
> +/*
> + * transfer the content of the LRs back into the corresponding ap_list:
> + * - active bit is transferred as is
> + * - pending bit is
> + * - transferred as is in case of edge sensitive IRQs
> + * - set to the line-level (resample time) for level sensitive IRQs
> + */
> +void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
> +{
> + struct vgic_v2_cpu_if *cpuif = &vcpu->arch.vgic_cpu.vgic_v2;
> + int lr;
> +
> + for (lr = 0; lr < vcpu->arch.vgic_cpu.used_lrs; lr++) {
> + u32 val = cpuif->vgic_lr[lr];
> + u32 intid = val & GICH_LR_VIRTUALID;
> + struct vgic_irq *irq;
> +
> + irq = vgic_get_irq(vcpu->kvm, vcpu, intid);
> +
> + spin_lock(&irq->irq_lock);
> +
> + /* Always preserve the active bit */
> + irq->active = !!(val & GICH_LR_ACTIVE_BIT);
> +
> + /* Edge is the only case where we preserve the pending bit */
> + if (irq->config == VGIC_CONFIG_EDGE &&
> + (val & GICH_LR_PENDING_BIT)) {
> + irq->pending = true;
> +
> + if (intid < VGIC_NR_SGIS) {
> + u32 cpuid = val & GICH_LR_PHYSID_CPUID;
> +
> + cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT;
> + irq->source |= (1 << cpuid);
> + }
> + }
> +
> + /* Clear soft pending state when level IRQs have been acked */
> + if (irq->config == VGIC_CONFIG_LEVEL &&
> + !(val & GICH_LR_PENDING_BIT)) {
> + irq->soft_pending = false;
> + irq->pending = irq->line_level;
> + }
> +
> + spin_unlock(&irq->irq_lock);
> + }
> +}
> +
> +/*
> + * Populates the particular LR with the state of a given IRQ:
> + * - for an edge sensitive IRQ the pending state is reset in the struct
> + * - for a level sensitive IRQ the pending state value is unchanged;
> + * it will be resampled on deactivation
> + *
> + * If irq is not NULL, the irq_lock must be hold already by the caller.
> + * If irq is NULL, the respective LR gets cleared.
> + */
> +void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr)
> +{
> + u32 val;
> +
> + if (!irq) {
> + val = 0;
> + goto out;
> + }
> +
> + val = irq->intid;
> +
> + if (irq->pending) {
> + val |= GICH_LR_PENDING_BIT;
> +
> + if (irq->config == VGIC_CONFIG_EDGE)
> + irq->pending = false;
> +
> + if (irq->intid < VGIC_NR_SGIS) {
> + u32 src = ffs(irq->source);
> +
> + BUG_ON(!src);
> + val |= (src - 1) << GICH_LR_PHYSID_CPUID_SHIFT;
> + irq->source &= ~(1 << (src - 1));
> + if (irq->source)
> + irq->pending = true;
> + }
> + }
> +
> + if (irq->active)
> + val |= GICH_LR_ACTIVE_BIT;
> +
> + if (irq->hw) {
> + val |= GICH_LR_HW;
> + val |= irq->hwintid << GICH_LR_PHYSID_CPUID_SHIFT;
> + } else {
> + if (irq->config == VGIC_CONFIG_LEVEL)
> + val |= GICH_LR_EOI;
> + }
shouldn't we start writing the priority here (and in the GICv3 version)?
(which has the fun consequence of having to compare priorities against
the virtual priority filter in PATCH 11).
> +
> +out:
> + vcpu->arch.vgic_cpu.vgic_v2.vgic_lr[lr] = val;
> +}
> +
> void vgic_v2_irq_change_affinity(struct kvm *kvm, u32 intid, u8 new_targets)
> {
> struct vgic_dist *dist = &kvm->arch.vgic;
> diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c
> index 29c753e..90a85bf 100644
> --- a/virt/kvm/arm/vgic/vgic.c
> +++ b/virt/kvm/arm/vgic/vgic.c
> @@ -273,3 +273,207 @@ int kvm_vgic_inject_irq(struct kvm *kvm, int cpuid, unsigned int intid,
> vgic_update_irq_pending(kvm, vcpu, intid, level);
> return 0;
> }
> +
> +/**
> + * vgic_prune_ap_list - Remove non-relevant interrupts from the list
> + *
> + * @vcpu: The VCPU pointer
> + *
> + * Go over the list of "interesting" interrupts, and prune those that we
> + * won't have to consider in the near future.
> + */
> +static void vgic_prune_ap_list(struct kvm_vcpu *vcpu)
> +{
> + struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
> + struct vgic_irq *irq, *tmp;
> +
> +retry:
> + spin_lock(&vgic_cpu->ap_list_lock);
> +
> + list_for_each_entry_safe(irq, tmp, &vgic_cpu->ap_list_head, ap_list) {
> + struct kvm_vcpu *target_vcpu, *vcpuA, *vcpuB;
> +
> + spin_lock(&irq->irq_lock);
> +
> + BUG_ON(vcpu != irq->vcpu);
> +
> + target_vcpu = vgic_target_oracle(irq);
> +
> + if (!target_vcpu) {
> + /*
> + * We don't need to process this interrupt any
> + * further, move it off the list.
> + */
> + list_del_init(&irq->ap_list);
> + irq->vcpu = NULL;
> + spin_unlock(&irq->irq_lock);
> + continue;
> + }
> +
> + if (target_vcpu == vcpu) {
> + /* We're on the right CPU */
> + spin_unlock(&irq->irq_lock);
> + continue;
> + }
> +
> + /* This interrupt looks like it has to be migrated. */
> +
> + spin_unlock(&irq->irq_lock);
> + spin_unlock(&vgic_cpu->ap_list_lock);
> +
> + /*
> + * Ensure locking order by always locking the smallest
> + * ID first.
> + */
> + if (vcpu->vcpu_id < target_vcpu->vcpu_id) {
> + vcpuA = vcpu;
> + vcpuB = target_vcpu;
> + } else {
> + vcpuA = target_vcpu;
> + vcpuB = vcpu;
> + }
> +
> + spin_lock(&vcpuA->arch.vgic_cpu.ap_list_lock);
> + spin_lock(&vcpuB->arch.vgic_cpu.ap_list_lock);
> + spin_lock(&irq->irq_lock);
> +
> + /*
> + * If the affinity has been preserved, move the
> + * interrupt around. Otherwise, it means things have
> + * changed while the interrupt was unlocked, and we
> + * need to replay this.
> + *
> + * In all cases, we cannot trust the list not to have
> + * changed, so we restart from the beginning.
> + */
> + if (target_vcpu == vgic_target_oracle(irq)) {
> + struct vgic_cpu *new_cpu = &target_vcpu->arch.vgic_cpu;
> +
> + list_del_init(&irq->ap_list);
> + irq->vcpu = target_vcpu;
> + list_add_tail(&irq->ap_list, &new_cpu->ap_list_head);
> + }
> +
> + spin_unlock(&irq->irq_lock);
> + spin_unlock(&vcpuB->arch.vgic_cpu.ap_list_lock);
> + spin_unlock(&vcpuA->arch.vgic_cpu.ap_list_lock);
> + goto retry;
> + }
> +
> + spin_unlock(&vgic_cpu->ap_list_lock);
> +}
> +
> +static inline void vgic_process_maintenance_interrupt(struct kvm_vcpu *vcpu)
> +{
> + if (kvm_vgic_global_state.type == VGIC_V2)
> + vgic_v2_process_maintenance(vcpu);
> + else
> + WARN(1, "GICv3 Not Implemented\n");
> +}
> +
> +static inline void vgic_fold_lr_state(struct kvm_vcpu *vcpu)
> +{
> + if (kvm_vgic_global_state.type == VGIC_V2)
> + vgic_v2_fold_lr_state(vcpu);
> + else
> + WARN(1, "GICv3 Not Implemented\n");
> +}
> +
> +/*
> + * Requires the ap_lock to be held.
> + * If irq is not NULL, requires the IRQ lock to be held as well.
> + * If irq is NULL, the list register gets cleared.
> + */
> +static inline void vgic_populate_lr(struct kvm_vcpu *vcpu,
> + struct vgic_irq *irq, int lr)
> +{
> + if (kvm_vgic_global_state.type == VGIC_V2)
> + vgic_v2_populate_lr(vcpu, irq, lr);
> + else
> + WARN(1, "GICv3 Not Implemented\n");
> +}
> +
> +static inline void vgic_set_underflow(struct kvm_vcpu *vcpu)
> +{
> + if (kvm_vgic_global_state.type == VGIC_V2)
> + vgic_v2_set_underflow(vcpu);
> + else
> + WARN(1, "GICv3 Not Implemented\n");
> +}
> +
> +static int compute_ap_list_depth(struct kvm_vcpu *vcpu)
> +{
> + struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
> + struct vgic_irq *irq;
> + int count = 0;
> +
> + list_for_each_entry(irq, &vgic_cpu->ap_list_head, ap_list) {
> + spin_lock(&irq->irq_lock);
> + /* GICv2 SGIs can count for more than one... */
> + if (irq->intid < VGIC_NR_SGIS && irq->source)
> + count += hweight8(irq->source);
> + else
> + count++;
> + spin_unlock(&irq->irq_lock);
> + }
> + return count;
> +}
> +
> +/* requires the vcpu ap_lock to be held */
> +static void vgic_populate_lrs(struct kvm_vcpu *vcpu)
> +{
> + struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
> + u32 model = vcpu->kvm->arch.vgic.vgic_model;
> + struct vgic_irq *irq;
> + int count = 0;
> +
> + if (compute_ap_list_depth(vcpu) > vcpu->arch.vgic_cpu.nr_lr) {
> + vgic_set_underflow(vcpu);
> + vgic_sort_ap_list(vcpu);
> + }
> +
> + list_for_each_entry(irq, &vgic_cpu->ap_list_head, ap_list) {
> + spin_lock(&irq->irq_lock);
> +
> + if (unlikely(vgic_target_oracle(irq) != vcpu))
> + goto next;
> +
> + /*
> + * If we get an SGI with multiple sources, try to get
> + * them in all at once.
> + */
> + if (model == KVM_DEV_TYPE_ARM_VGIC_V2 &&
> + irq->intid < VGIC_NR_SGIS) {
> + while (irq->source && count < vcpu->arch.vgic_cpu.nr_lr)
> + vgic_populate_lr(vcpu, irq, count++);
> + } else {
> + vgic_populate_lr(vcpu, irq, count++);
> + }
> +
> +next:
> + spin_unlock(&irq->irq_lock);
> +
> + if (count == vcpu->arch.vgic_cpu.nr_lr)
> + break;
> + }
> +
> + vcpu->arch.vgic_cpu.used_lrs = count;
> +
> + /* Nuke remaining LRs */
> + for ( ; count < vcpu->arch.vgic_cpu.nr_lr; count++)
> + vgic_populate_lr(vcpu, NULL, count);
> +}
> +
> +void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
> +{
> + vgic_process_maintenance_interrupt(vcpu);
> + vgic_fold_lr_state(vcpu);
> + vgic_prune_ap_list(vcpu);
> +}
> +
> +void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
> +{
> + spin_lock(&vcpu->arch.vgic_cpu.ap_list_lock);
> + vgic_populate_lrs(vcpu);
> + spin_unlock(&vcpu->arch.vgic_cpu.ap_list_lock);
> +}
> diff --git a/virt/kvm/arm/vgic/vgic.h b/virt/kvm/arm/vgic/vgic.h
> index b2faf00..95ef3cf 100644
> --- a/virt/kvm/arm/vgic/vgic.h
> +++ b/virt/kvm/arm/vgic/vgic.h
> @@ -21,5 +21,9 @@ struct vgic_irq *vgic_get_irq(struct kvm *kvm, struct kvm_vcpu *vcpu,
> bool vgic_queue_irq(struct kvm *kvm, struct vgic_irq *irq);
>
> void vgic_v2_irq_change_affinity(struct kvm *kvm, u32 intid, u8 target);
> +void vgic_v2_process_maintenance(struct kvm_vcpu *vcpu);
> +void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu);
> +void vgic_v2_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr);
> +void vgic_v2_set_underflow(struct kvm_vcpu *vcpu);
>
> #endif
> --
> 2.7.3
>
next prev parent reply other threads:[~2016-03-31 9:47 UTC|newest]
Thread overview: 138+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-25 2:04 [RFC PATCH 00/45] KVM: arm/arm64: Rework virtual GIC emulation Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 01/45] KVM: arm/arm64: add missing MMIO data write-back Andre Przywara
2016-03-29 12:33 ` Christoffer Dall
2016-04-05 12:12 ` Andre Przywara
2016-04-05 12:58 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 02/45] KVM: arm/arm64: pmu: abstract access to number of SPIs Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 03/45] KVM: arm/arm64: arch_timer: rework VGIC <-> timer interface Andre Przywara
2016-03-29 13:01 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 04/45] KVM: arm/arm64: vgic-new: Add data structure definitions Andre Przywara
2016-03-29 13:09 ` Christoffer Dall
2016-04-05 13:34 ` Andre Przywara
2016-04-05 20:10 ` Christoffer Dall
2016-04-06 13:57 ` Christoffer Dall
2016-04-06 14:09 ` Andre Przywara
2016-04-06 14:46 ` Christoffer Dall
2016-04-06 14:53 ` Andre Przywara
2016-04-06 14:57 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 05/45] KVM: arm/arm64: vgic-new: Add acccessor to new struct vgic_irq instance Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 06/45] KVM: arm/arm64: vgic-new: Implement virtual IRQ injection Andre Przywara
2016-03-29 21:16 ` Christoffer Dall
2016-04-05 17:28 ` Andre Przywara
2016-04-06 14:23 ` Christoffer Dall
2016-04-14 10:53 ` Andre Przywara
2016-04-14 12:15 ` Christoffer Dall
2016-04-14 13:45 ` Andre Przywara
2016-04-14 14:05 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 07/45] KVM: arm/arm64: vgic-new: Add vgic GICv2 change_affinity Andre Przywara
2016-03-30 9:29 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 08/45] KVM: arm/arm64: vgic-new: Add IRQ sorting Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 09/45] KVM: arm/arm64: vgic-new: Add GICv2 IRQ sync/flush Andre Przywara
2016-03-30 13:53 ` Christoffer Dall
2016-04-05 17:57 ` Andre Przywara
2016-04-06 14:34 ` Christoffer Dall
2016-03-31 9:47 ` Christoffer Dall [this message]
2016-04-11 11:40 ` Andre Przywara
2016-04-12 12:25 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 10/45] KVM: arm/arm64: vgic-new: Add GICv3 world switch backend Andre Przywara
2016-03-30 20:40 ` Christoffer Dall
2016-04-12 13:59 ` Andre Przywara
2016-04-12 15:02 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 11/45] KVM: arm/arm64: vgic-new: Implement kvm_vgic_vcpu_pending_irq Andre Przywara
2016-03-31 8:54 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 12/45] KVM: arm/arm64: vgic-new: Add MMIO handling framework Andre Przywara
2016-03-31 9:08 ` Christoffer Dall
2016-03-31 9:09 ` Christoffer Dall
2016-03-31 12:25 ` Paolo Bonzini
2016-03-31 14:31 ` Christoffer Dall
2016-04-01 12:11 ` André Przywara
2016-04-01 12:17 ` Christoffer Dall
2016-04-11 10:53 ` Andre Przywara
2016-04-12 12:50 ` Christoffer Dall
2016-04-12 15:56 ` Marc Zyngier
2016-04-12 17:26 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 13/45] KVM: arm/arm64: vgic-new: Export register access interface Andre Przywara
2016-03-31 9:24 ` Christoffer Dall
2016-04-11 11:09 ` Andre Przywara
2016-04-12 12:52 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 14/45] KVM: arm/arm64: vgic-new: Add CTLR, TYPER and IIDR handlers Andre Przywara
2016-03-31 9:27 ` Christoffer Dall
2016-04-11 11:23 ` Andre Przywara
2016-04-12 12:55 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 15/45] KVM: arm/arm64: vgic-new: Add ENABLE registers handlers Andre Przywara
2016-03-31 9:33 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 16/45] KVM: arm/arm64: vgic-new: Add PENDING " Andre Przywara
2016-03-31 9:35 ` Christoffer Dall
2016-04-11 11:31 ` Andre Przywara
2016-04-12 13:10 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 17/45] KVM: arm/arm64: vgic-new: Add PRIORITY " Andre Przywara
2016-03-31 9:50 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 18/45] KVM: arm/arm64: vgic-new: Add ACTIVE " Andre Przywara
2016-03-31 9:58 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 19/45] KVM: arm/arm64: vgic-new: Add CONFIG " Andre Przywara
2016-03-31 10:07 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 20/45] KVM: arm/arm64: vgic-new: Add TARGET " Andre Przywara
2016-03-31 11:31 ` Christoffer Dall
2016-04-11 12:10 ` Andre Przywara
2016-04-12 13:18 ` Christoffer Dall
2016-04-12 15:18 ` Andre Przywara
2016-04-12 15:26 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 21/45] KVM: arm/arm64: vgic-new: Add SGIR register handler Andre Przywara
2016-03-31 11:35 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 22/45] KVM: arm/arm64: vgic-new: Add SGIPENDR register handlers Andre Przywara
2016-03-31 11:37 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 23/45] KVM: arm/arm64: vgic-new: Add GICv3 emulation framework Andre Przywara
2016-03-31 11:48 ` Christoffer Dall
2016-04-11 12:44 ` Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 24/45] KVM: arm/arm64: vgic-new: Add GICv3 CTLR, IIDR, TYPER handlers Andre Przywara
2016-03-31 11:53 ` Christoffer Dall
2016-04-11 13:00 ` Andre Przywara
2016-04-12 13:20 ` Christoffer Dall
2016-03-25 2:04 ` [RFC PATCH 25/45] KVM: arm/arm64: vgic-new: Add GICv3 redistributor TYPER handler Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 26/45] KVM: arm/arm64: vgic-new: Add GICv3 IDREGS register handler Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 27/45] KVM: arm/arm64: vgic-new: Add GICv3 IROUTER register handlers Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 28/45] KVM: arm/arm64: vgic-new: Add GICv3 SGI system register trap handler Andre Przywara
2016-03-31 12:07 ` Christoffer Dall
2016-04-11 13:11 ` Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 29/45] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM device ops registration Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 30/45] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_NR_IRQS Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 31/45] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_CTRL Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 32/45] KVM: arm/arm64: vgic-new: vgic_kvm_device: KVM_DEV_ARM_VGIC_GRP_ADDR Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 33/45] KVM: arm/arm64: vgic-new: vgic_kvm_device: access to VGIC registers Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 34/45] KVM: arm/arm64: vgic-new: vgic_kvm_device: implement kvm_vgic_addr Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 35/45] KVM: arm/arm64: vgic-new: Add userland access to VGIC dist registers Andre Przywara
2016-03-25 2:04 ` [RFC PATCH 36/45] KVM: arm/arm64: vgic-new: Add GICH_VMCR accessors Andre Przywara
2016-03-25 2:05 ` [RFC PATCH 37/45] KVM: arm/arm64: vgic-new: Add userland GIC CPU interface access Andre Przywara
2016-03-25 2:05 ` [RFC PATCH 38/45] KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_init Andre Przywara
2016-03-25 2:05 ` [RFC PATCH 39/45] KVM: arm/arm64: vgic-new: vgic_init: implement vgic_create Andre Przywara
2016-03-25 2:05 ` [RFC PATCH 40/45] KVM: arm/arm64: vgic-new: vgic_init: implement vgic_init Andre Przywara
2016-03-31 17:59 ` Christoffer Dall
2016-04-01 8:20 ` Eric Auger
2016-04-01 9:00 ` Christoffer Dall
2016-03-25 2:05 ` [RFC PATCH 41/45] KVM: arm/arm64: vgic-new: vgic_init: implement map_resources Andre Przywara
2016-03-25 2:05 ` [RFC PATCH 42/45] KVM: arm/arm64: vgic-new: Add vgic_v2/v3_enable Andre Przywara
2016-03-25 2:05 ` [RFC PATCH 43/45] KVM: arm/arm64: vgic-new: implement mapped IRQ handling Andre Przywara
2016-03-31 18:15 ` Christoffer Dall
2016-04-01 8:44 ` Eric Auger
2016-03-25 2:05 ` [RFC PATCH 44/45] KVM: arm/arm64: vgic-new: Add dummy MSI implementation Andre Przywara
2016-03-31 18:16 ` Christoffer Dall
2016-04-07 14:35 ` Eric Auger
2016-03-25 2:05 ` [RFC PATCH 45/45] KVM: arm/arm64: vgic-new: enable build Andre Przywara
2016-03-31 18:18 ` Christoffer Dall
2016-04-11 14:45 ` Andre Przywara
2016-04-12 13:21 ` Christoffer Dall
2016-03-25 15:58 ` [RFC PATCH 00/45] KVM: arm/arm64: Rework virtual GIC emulation Diana Madalina Craciun
2016-03-26 2:11 ` André Przywara
2016-03-29 13:12 ` Vladimir Murzin
2016-03-30 11:42 ` Vladimir Murzin
2016-03-30 11:52 ` Vladimir Murzin
2016-03-30 13:56 ` Christoffer Dall
2016-03-30 14:13 ` Vladimir Murzin
2016-03-30 19:53 ` Christoffer Dall
2016-03-30 12:07 ` Marc Zyngier
2016-03-30 19:55 ` Christoffer Dall
2016-03-31 9:06 ` Marc Zyngier
2016-03-31 18:28 ` Christoffer Dall
2016-03-31 18:30 ` Christoffer Dall
2016-04-13 16:07 ` André Przywara
2016-04-13 17:24 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160331094715.GA20251@cbox \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).