From mboxrd@z Thu Jan  1 00:00:00 1970
From: robh@kernel.org (Rob Herring)
Date: Mon, 4 Apr 2016 00:15:29 -0500
Subject: [PATCH v2 1/9] Documentation: dt-bindings: Document STM32 EXTI
 controller bindings
In-Reply-To: <1459436979-17275-2-git-send-email-mcoquelin.stm32@gmail.com>
References: <1459436979-17275-1-git-send-email-mcoquelin.stm32@gmail.com>
 <1459436979-17275-2-git-send-email-mcoquelin.stm32@gmail.com>
Message-ID: <20160404051529.GA17806@rob-hp-laptop>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Thu, Mar 31, 2016 at 05:09:31PM +0200, Maxime Coquelin wrote:
> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> ---
>  .../bindings/interrupt-controller/st,stm32-exti.txt  | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
> 
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
> new file mode 100644
> index 000000000000..6e7703d4ff5b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
> @@ -0,0 +1,20 @@
> +STM32 External Interrupt Controller
> +
> +Required properties:
> +
> +- compatible: Should be "st,stm32-exti"
> +- reg: Specifies base physical address and size of the registers
> +- interrupt-controller: Indentifies the node as an interrupt controller
> +- #interrupt-cells: Specifies the number of cells to encode an interrupt
> +  specifier, shall be 2
> +- interrupts: interrupts references to primary interrupt controller

Need to define how many and what is the order?

Are these 1:1 mapping? You could use interrupt-map here to define the 
mapping.

> +
> +Example:
> +
> +exti: interrupt-controller at 40013c00 {
> +	compatible = "st,stm32-exti";
> +	interrupt-controller;
> +	#interrupt-cells = <2>;
> +	reg = <0x40013C00 0x400>;
> +	interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
> +};
> -- 
> 1.9.1
>