[PATCH v6 0/7] KVM PCIe/MSI passthrough on ARM/ARM64: kernel part 1/3: iommu changes

[alex.williamson@redhat.com (Alex Williamson)]

On Mon,  4 Apr 2016 08:06:55 +0000
Eric Auger <eric.auger@linaro.org> wrote:

> This series introduces the dma-reserved-iommu api used to:
> - create/destroy an iova domain dedicated to reserved iova bindings
> - map/unmap physical addresses onto reserved IOVAs.
> - unmap and destroy all IOVA reserved bindings

Why are we making the decision to have an unbalanced map vs unmap, we
can create individual mappings, but only unmap the whole thing and
start over?  That's a strange interface.  Thanks,

Alex
 
> Currently reserved IOVAs are meant to map MSI physical doorbells. A single
> reserved domain does exit per domain.
> 
> Also a new domain attribute is introduced to signal whether the MSI
> addresses must be mapped in the IOMMU
> 
> VFIO subsystem is supposed to create/destroy the iommu reserved domain.
> 
> When the MSI sub-system is about to handle an MSI physical address
> that needs to be bound, it uses the dma-reserved_iommu API to map/unmap
> the address. Since several drivers are likely to use the same doorbell,
> a reference counting must exist on the bindings. An RB-tree indexed by PA
> is used.
> 
> More details & context can be found at:
> http://www.linaro.org/blog/core-dump/kvm-pciemsi-passthrough-armarm64/
> 
> Best Regards
> 
> Eric
> 
> Git: complete series available at
> https://git.linaro.org/people/eric.auger/linux.git/shortlog/refs/heads/v4.6-rc1-pcie-passthrough-v6
> 
> History:
> 
> RFC v5 -> patch v6:
> - split to ease the review process
> - in dma-reserved-api use a spin lock instead of a mutex (reported by
>   Jean-Philippe)
> - revisit iommu_get_reserved_iova API to pass a size parameter upon
>   Marc's request
> - Consistently use the page order passed when creating the iova domain.
> - init reserved_binding_list (reported by Julien)
> 
> RFC v4 -> RFC v5:
> - take into account Thomas' comments on MSI related patches
>   - split "msi: IOMMU map the doorbell address when needed"
>   - increase readability and add comments
>   - fix style issues
>  - split "iommu: Add DOMAIN_ATTR_MSI_MAPPING attribute"
>  - platform ITS now advertises IOMMU_CAP_INTR_REMAP
>  - fix compilation issue with CONFIG_IOMMU API unset
>  - arm-smmu-v3 now advertises DOMAIN_ATTR_MSI_MAPPING
> 
> RFC v3 -> v4:
> - Move doorbell mapping/unmapping in msi.c
> - fix ref count issue on set_affinity: in case of a change in the address
>   the previous address is decremented
> - doorbell map/unmap now is done on msi composition. Should allow the use
>   case for platform MSI controllers
> - create dma-reserved-iommu.h/c exposing/implementing a new API dedicated
>   to reserved IOVA management (looking like dma-iommu glue)
> - series reordering to ease the review:
>   - first part is related to IOMMU
>   - second related to MSI sub-system
>   - third related to VFIO (except arm-smmu IOMMU_CAP_INTR_REMAP removal)
> - expose the number of requested IOVA pages through VFIO_IOMMU_GET_INFO
>   [this partially addresses Marc's comments on iommu_get/put_single_reserved
>    size/alignment problematic - which I did not ignore - but I don't know
>    how much I can do at the moment]
> 
> RFC v2 -> RFC v3:
> - should fix wrong handling of some CONFIG combinations:
>   CONFIG_IOVA, CONFIG_IOMMU_API, CONFIG_PCI_MSI_IRQ_DOMAIN
> - fix MSI_FLAG_IRQ_REMAPPING setting in GICv3 ITS (although not tested)
> 
> PATCH v1 -> RFC v2:
> - reverted to RFC since it looks more reasonable ;-) the code is split
>   between VFIO, IOMMU, MSI controller and I am not sure I did the right
>   choices. Also API need to be further discussed.
> - iova API usage in arm-smmu.c.
> - MSI controller natively programs the MSI addr with either the PA or IOVA.
>   This is not done anymore in vfio-pci driver as suggested by Alex.
> - check irq remapping capability of the group
> 
> RFC v1 [2] -> PATCH v1:
> - use the existing dma map/unmap ioctl interface with a flag to register a
>   reserved IOVA range. Use the legacy Rb to store this special vfio_dma.
> - a single reserved IOVA contiguous region now is allowed
> - use of an RB tree indexed by PA to store allocated reserved slots
> - use of a vfio_domain iova_domain to manage iova allocation within the
>   window provided by the userspace
> - vfio alloc_map/unmap_free take a vfio_group handle
> - vfio_group handle is cached in vfio_pci_device
> - add ref counting to bindings
> - user modality enabled at the end of the series
> 
> 
> Eric Auger (7):
>   iommu: Add DOMAIN_ATTR_MSI_MAPPING attribute
>   iommu/arm-smmu: advertise DOMAIN_ATTR_MSI_MAPPING attribute
>   iommu: introduce a reserved iova cookie
>   dma-reserved-iommu: alloc/free_reserved_iova_domain
>   dma-reserved-iommu: reserved binding rb-tree and helpers
>   dma-reserved-iommu: iommu_get/put_single_reserved
>   dma-reserved-iommu: iommu_unmap_reserved
> 
>  drivers/iommu/Kconfig              |   8 +
>  drivers/iommu/Makefile             |   1 +
>  drivers/iommu/arm-smmu-v3.c        |   2 +
>  drivers/iommu/arm-smmu.c           |   2 +
>  drivers/iommu/dma-reserved-iommu.c | 321 +++++++++++++++++++++++++++++++++++++
>  drivers/iommu/iommu.c              |   2 +
>  include/linux/dma-reserved-iommu.h |  80 +++++++++
>  include/linux/iommu.h              |   7 +
>  8 files changed, 423 insertions(+)
>  create mode 100644 drivers/iommu/dma-reserved-iommu.c
>  create mode 100644 include/linux/dma-reserved-iommu.h
>