* [PATCH] dts/ls1043a-rdb: add the DTS for DSPI support
@ 2016-03-02 5:52 Yunhui Cui
2016-04-13 1:53 ` Shawn Guo
0 siblings, 1 reply; 3+ messages in thread
From: Yunhui Cui @ 2016-03-02 5:52 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds dts nodes for DSPI on LS1043A-RDB.
Signed-off-by: Yunhui Cui <B56489@freescale.com>
Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
index ce23557..f895fc0 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
@@ -107,6 +107,19 @@
};
};
+&dspi0 {
+ bus-num = <0>;
+ status = "okay";
+
+ flash at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "n25q128a13", "jedec,spi-nor"; /* 16MB */
+ reg = <0>;
+ spi-max-frequency = <1000000>; /* input clock */
+ };
+};
+
&duart0 {
status = "okay";
};
--
2.1.0.27.g96db324
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH] dts/ls1043a-rdb: add the DTS for DSPI support
2016-03-02 5:52 [PATCH] dts/ls1043a-rdb: add the DTS for DSPI support Yunhui Cui
@ 2016-04-13 1:53 ` Shawn Guo
2016-04-13 2:12 ` Yunhui Cui
0 siblings, 1 reply; 3+ messages in thread
From: Shawn Guo @ 2016-04-13 1:53 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 02, 2016 at 01:52:15PM +0800, Yunhui Cui wrote:
> This patch adds dts nodes for DSPI on LS1043A-RDB.
>
> Signed-off-by: Yunhui Cui <B56489@freescale.com>
> Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
The patch subject prefix should be like 'arm64: dts: ls1043a-rdb: '. I
fixed it up and applied the patch.
Shawn
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
> index ce23557..f895fc0 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
> @@ -107,6 +107,19 @@
> };
> };
>
> +&dspi0 {
> + bus-num = <0>;
> + status = "okay";
> +
> + flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "n25q128a13", "jedec,spi-nor"; /* 16MB */
> + reg = <0>;
> + spi-max-frequency = <1000000>; /* input clock */
> + };
> +};
> +
> &duart0 {
> status = "okay";
> };
> --
> 2.1.0.27.g96db324
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] dts/ls1043a-rdb: add the DTS for DSPI support
2016-04-13 1:53 ` Shawn Guo
@ 2016-04-13 2:12 ` Yunhui Cui
0 siblings, 0 replies; 3+ messages in thread
From: Yunhui Cui @ 2016-04-13 2:12 UTC (permalink / raw)
To: linux-arm-kernel
Hi Shawn,
Many thanks !
Thanks
Yunhui
-----Original Message-----
From: Shawn Guo [mailto:shawnguo at kernel.org]
Sent: Wednesday, April 13, 2016 9:53 AM
To: Yunhui Cui
Cc: robh+dt at kernel.org; pawel.moll at arm.com; mark.rutland at arm.com; ijc+devicetree at hellion.org.uk; galak at codeaurora.org; Yao Yuan; leoli at freescale.com; linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org; devicetree at vger.kernel.org
Subject: Re: [PATCH] dts/ls1043a-rdb: add the DTS for DSPI support
On Wed, Mar 02, 2016 at 01:52:15PM +0800, Yunhui Cui wrote:
> This patch adds dts nodes for DSPI on LS1043A-RDB.
>
> Signed-off-by: Yunhui Cui <B56489@freescale.com>
> Signed-off-by: Yuan Yao <yao.yuan@nxp.com>
The patch subject prefix should be like 'arm64: dts: ls1043a-rdb: '. I fixed it up and applied the patch.
Shawn
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
> index ce23557..f895fc0 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
> @@ -107,6 +107,19 @@
> };
> };
>
> +&dspi0 {
> + bus-num = <0>;
> + status = "okay";
> +
> + flash at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "n25q128a13", "jedec,spi-nor"; /* 16MB */
> + reg = <0>;
> + spi-max-frequency = <1000000>; /* input clock */
> + };
> +};
> +
> &duart0 {
> status = "okay";
> };
> --
> 2.1.0.27.g96db324
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-04-13 2:12 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-03-02 5:52 [PATCH] dts/ls1043a-rdb: add the DTS for DSPI support Yunhui Cui
2016-04-13 1:53 ` Shawn Guo
2016-04-13 2:12 ` Yunhui Cui
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox