* [GIT PULL] STi DT updates for v4.7 #1
@ 2016-04-08 13:20 Maxime Coquelin
2016-04-13 22:05 ` Olof Johansson
0 siblings, 1 reply; 4+ messages in thread
From: Maxime Coquelin @ 2016-04-08 13:20 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof, Arnd and Kevin,
Please consider this first round of STi DT updates for v4.7:
The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti.git
tags/sti-dt-for-v4.7-1
for you to fetch changes up to a8ff73843d015af1a65e94604677c2efd9ae70d4:
ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource
(2016-04-05 15:42:29 +0200)
----------------------------------------------------------------
Highlights:
-----------
- Add CPUFreq support to STiH407 family
- Add Mailbox nodes to STiH407 family
- Add RemoteProc nodes to STiH407 family
- Use 'reserved-memory' for DMA memory on STiH407
- Use the LPC timer as a clocksource
----------------------------------------------------------------
Lee Jones (9):
ARM: STi: STiH407: Provide generic (safe) DVFS configuration
ARM: STi: STiH407: Provide CPU with clocking information
ARM: STi: STiH407: Link CPU with its voltage supply
ARM: STi: STiH407: Provide CPU with a means to look-up Major number
ARM: STi: stih407-family: Add nodes for Mailbox
ARM: STi: DT: STiH407: Enable Mailbox testing facility
ARM: STiH407: Add nodes for RemoteProc
ARM: STiH407: Move over to using the 'reserved-memory' API for
obtaining DMA memory
ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource
arch/arm/boot/dts/stih407-family.dtsi | 131
+++++++++++++++++++++++++++++++++-
1 file changed, 130 insertions(+), 1 deletion(-)
^ permalink raw reply [flat|nested] 4+ messages in thread* [GIT PULL] STi DT updates for v4.7 #1
2016-04-08 13:20 [GIT PULL] STi DT updates for v4.7 #1 Maxime Coquelin
@ 2016-04-13 22:05 ` Olof Johansson
2016-04-21 12:13 ` Lee Jones
2016-04-26 14:21 ` Maxime Coquelin
0 siblings, 2 replies; 4+ messages in thread
From: Olof Johansson @ 2016-04-13 22:05 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Fri, Apr 08, 2016 at 03:20:50PM +0200, Maxime Coquelin wrote:
> Hi Olof, Arnd and Kevin,
>
> Please consider this first round of STi DT updates for v4.7:
>
> The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
>
> Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
>
> are available in the git repository at:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti.git
> tags/sti-dt-for-v4.7-1
>
> for you to fetch changes up to a8ff73843d015af1a65e94604677c2efd9ae70d4:
>
> ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource (2016-04-05
> 15:42:29 +0200)
>
> ----------------------------------------------------------------
> Highlights:
> -----------
> - Add CPUFreq support to STiH407 family
> - Add Mailbox nodes to STiH407 family
> - Add RemoteProc nodes to STiH407 family
> - Use 'reserved-memory' for DMA memory on STiH407
> - Use the LPC timer as a clocksource
>
> ----------------------------------------------------------------
> Lee Jones (9):
> ARM: STi: STiH407: Provide generic (safe) DVFS configuration
> ARM: STi: STiH407: Provide CPU with clocking information
> ARM: STi: STiH407: Link CPU with its voltage supply
> ARM: STi: STiH407: Provide CPU with a means to look-up Major number
> ARM: STi: stih407-family: Add nodes for Mailbox
> ARM: STi: DT: STiH407: Enable Mailbox testing facility
> ARM: STiH407: Add nodes for RemoteProc
> ARM: STiH407: Move over to using the 'reserved-memory' API for
> obtaining DMA memory
> ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource
We use the format;
ARM: dts: STi: <...>
for DT changes.
Also, I've sent several replies directly to patches that should be
revisited (or dropped):
ARM: STi: stih407-family: Add nodes for Mailbox: Fix unit-ids.
ARM: STi: DT: STiH407: Enable Mailbox testing facility: Should probably not be
in DT.
ARM: STiH407: Add nodes for RemoteProc: Doesn't conform to the bindings patch.
All in all, please do more due diligence on your patches before you send
them, so we can avoid doing it at our level.
-Olof
^ permalink raw reply [flat|nested] 4+ messages in thread
* [GIT PULL] STi DT updates for v4.7 #1
2016-04-13 22:05 ` Olof Johansson
@ 2016-04-21 12:13 ` Lee Jones
2016-04-26 14:21 ` Maxime Coquelin
1 sibling, 0 replies; 4+ messages in thread
From: Lee Jones @ 2016-04-21 12:13 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, 13 Apr 2016, Olof Johansson wrote:
> On Fri, Apr 08, 2016 at 03:20:50PM +0200, Maxime Coquelin wrote:
> > Hi Olof, Arnd and Kevin,
> >
> > Please consider this first round of STi DT updates for v4.7:
> >
> > The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
> >
> > Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
> >
> > are available in the git repository at:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti.git
> > tags/sti-dt-for-v4.7-1
> >
> > for you to fetch changes up to a8ff73843d015af1a65e94604677c2efd9ae70d4:
> >
> > ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource (2016-04-05
> > 15:42:29 +0200)
> >
> > ----------------------------------------------------------------
> > Highlights:
> > -----------
> > - Add CPUFreq support to STiH407 family
> > - Add Mailbox nodes to STiH407 family
> > - Add RemoteProc nodes to STiH407 family
> > - Use 'reserved-memory' for DMA memory on STiH407
> > - Use the LPC timer as a clocksource
> >
> > ----------------------------------------------------------------
> > Lee Jones (9):
> > ARM: STi: STiH407: Provide generic (safe) DVFS configuration
> > ARM: STi: STiH407: Provide CPU with clocking information
> > ARM: STi: STiH407: Link CPU with its voltage supply
> > ARM: STi: STiH407: Provide CPU with a means to look-up Major number
> > ARM: STi: stih407-family: Add nodes for Mailbox
> > ARM: STi: DT: STiH407: Enable Mailbox testing facility
> > ARM: STiH407: Add nodes for RemoteProc
> > ARM: STiH407: Move over to using the 'reserved-memory' API for
> > obtaining DMA memory
> > ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource
Probably simpler to reply here, rather than to the patches themselves.
> We use the format;
>
> ARM: dts: STi: <...>
First I'd heard that this is now the defacto format. That certainly
wasn't the case when these patches were first authored. I will adopt
it from now on.
> for DT changes.
>
> Also, I've sent several replies directly to patches that should be
> revisited (or dropped):
>
> ARM: STi: stih407-family: Add nodes for Mailbox: Fix unit-ids.
These were left out due to historical reasons, but yes, they should be
in there now. Will change.
> ARM: STi: DT: STiH407: Enable Mailbox testing facility: Should probably not be
> in DT.
Depends what your reasons are for not wanting it in DT. The node has
no real use, dispite testing, so I can't really justify it being in
the upstream kernel. Will remove.
> ARM: STiH407: Add nodes for RemoteProc: Doesn't conform to the bindings patch.
Not sure what you mean here. Again, there have been some changes over
time. The evolution of change is reflected in the two RemoteProc
patches in the set. The resultant file should conform to the
documented bindings.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 4+ messages in thread
* [GIT PULL] STi DT updates for v4.7 #1
2016-04-13 22:05 ` Olof Johansson
2016-04-21 12:13 ` Lee Jones
@ 2016-04-26 14:21 ` Maxime Coquelin
1 sibling, 0 replies; 4+ messages in thread
From: Maxime Coquelin @ 2016-04-26 14:21 UTC (permalink / raw)
To: linux-arm-kernel
Hi Olof,
On 04/14/2016 12:05 AM, Olof Johansson wrote:
> Hi,
>
> On Fri, Apr 08, 2016 at 03:20:50PM +0200, Maxime Coquelin wrote:
>> Hi Olof, Arnd and Kevin,
>>
>> Please consider this first round of STi DT updates for v4.7:
>>
>> The following changes since commit f55532a0c0b8bb6148f4e07853b876ef73bc69ca:
>>
>> Linux 4.6-rc1 (2016-03-26 16:03:24 -0700)
>>
>> are available in the git repository at:
>>
>> git://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti.git
>> tags/sti-dt-for-v4.7-1
>>
>> for you to fetch changes up to a8ff73843d015af1a65e94604677c2efd9ae70d4:
>>
>> ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource (2016-04-05
>> 15:42:29 +0200)
>>
>> ----------------------------------------------------------------
>> Highlights:
>> -----------
>> - Add CPUFreq support to STiH407 family
>> - Add Mailbox nodes to STiH407 family
>> - Add RemoteProc nodes to STiH407 family
>> - Use 'reserved-memory' for DMA memory on STiH407
>> - Use the LPC timer as a clocksource
>>
>> ----------------------------------------------------------------
>> Lee Jones (9):
>> ARM: STi: STiH407: Provide generic (safe) DVFS configuration
>> ARM: STi: STiH407: Provide CPU with clocking information
>> ARM: STi: STiH407: Link CPU with its voltage supply
>> ARM: STi: STiH407: Provide CPU with a means to look-up Major number
>> ARM: STi: stih407-family: Add nodes for Mailbox
>> ARM: STi: DT: STiH407: Enable Mailbox testing facility
>> ARM: STiH407: Add nodes for RemoteProc
>> ARM: STiH407: Move over to using the 'reserved-memory' API for
>> obtaining DMA memory
>> ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource
> We use the format;
>
> ARM: dts: STi: <...>
>
> for DT changes.
Noted.
>
> Also, I've sent several replies directly to patches that should be
> revisited (or dropped):
>
> ARM: STi: stih407-family: Add nodes for Mailbox: Fix unit-ids.
>
> ARM: STi: DT: STiH407: Enable Mailbox testing facility: Should probably not be
> in DT.
>
> ARM: STiH407: Add nodes for RemoteProc: Doesn't conform to the bindings patch.
Lee has reworked his series, and all should be fine now.
For "ARM: STiH407: Add nodes for RemoteProc", the following patch does
the change to conform with the bindings.
It is not squashed in order to keep first reporter's "Suggested-by"
>
> All in all, please do more due diligence on your patches before you send
> them, so we can avoid doing it at our level.
Ok, I will be more careful next time.
Thanks,
Maxime
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-04-26 14:21 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-04-08 13:20 [GIT PULL] STi DT updates for v4.7 #1 Maxime Coquelin
2016-04-13 22:05 ` Olof Johansson
2016-04-21 12:13 ` Lee Jones
2016-04-26 14:21 ` Maxime Coquelin
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).