From mboxrd@z Thu Jan 1 00:00:00 1970 From: sre@kernel.org (Sebastian Reichel) Date: Sun, 17 Apr 2016 14:29:33 +0200 Subject: [PATCH] ARM: dts: omap3-n900: Specify peripherals LDO regulators initial mode In-Reply-To: <571329B0.9060503@gmail.com> References: <1460788643-18590-1-git-send-email-ivo.g.dimitrov.75@gmail.com> <20160417000536.GA1124@earth> <571329B0.9060503@gmail.com> Message-ID: <20160417122933.GA8093@earth> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On Sun, Apr 17, 2016 at 09:14:08AM +0300, Ivaylo Dimitrov wrote: > On 17.04.2016 03:05, Sebastian Reichel wrote: > >On Sat, Apr 16, 2016 at 09:37:23AM +0300, Ivaylo Dimitrov wrote: > >>Without that, regulators are left in the mode last set by the bootloader or > >>by the kernel the device was rebooted from. This leads to various problems > >>like non-working peripherals. > >> > >>Signed-off-by: Ivaylo Dimitrov > >>--- > >> arch/arm/boot/dts/omap3-n900.dts | 9 +++++++++ > >> 1 file changed, 9 insertions(+) > >> > >>diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts > >>index b3c26a9..1bb36e2 100644 > >>--- a/arch/arm/boot/dts/omap3-n900.dts > >>+++ b/arch/arm/boot/dts/omap3-n900.dts > >>@@ -329,6 +329,7 @@ > >> regulator-name = "V28"; > >> regulator-min-microvolt = <2800000>; > >> regulator-max-microvolt = <2800000>; > >>+ regulator-initial-mode = <0x0e>; > >> regulator-always-on; /* due to battery cover sensor */ > >> }; > > > >I think this should either get an additional > >comment like /* MODE_NORMAL */ or implemented > > According to the TRM, this is 'ACTIVE state', but that does not fit in the > regulator framework terminology. No problem with using STATE_ACTIVE or any other fitting description. IMHO that "active" is misleading for regulators without "always-on/boot-on" tag, but that was TI's decision. > >using a define and a TWL4030_REGULATOR_MODE_NORMAL > >constant to keep the *.dts easily readable. > > We already have RES_STATE_ACTIVE defined in linux/i2c/twl.h, is there a way > to include that in a dts? Not in its current state. During kernel build the C preprocessor is applied on the *.dts files. So the header may only contain preprocessor macros (e.g. #define). For that solution something like ~/src/linux/include/dt-bindings/regulator/maxim,max77802.h should be created for the twl regulator. -- Sebastian -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: