From mboxrd@z Thu Jan 1 00:00:00 1970 From: soren.brinkmann@xilinx.com (=?utf-8?B?U8O2cmVu?= Brinkmann) Date: Wed, 20 Apr 2016 07:27:36 -0700 Subject: [PATCH v2 1/2] Documentation: DT: vdma: Add clock support for vdma In-Reply-To: <1461152599-28858-1-git-send-email-appanad@xilinx.com> References: <1461152599-28858-1-git-send-email-appanad@xilinx.com> Message-ID: <20160420142736.GO7128@xsjsorenbubuntu> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, 2016-04-20 at 17:13:18 +0530, Kedareswara rao Appana wrote: > This patch updates the binding doc with clock description > for vdma. > > Signed-off-by: Kedareswara rao Appana > --- > Changes for v2: > --> Listed down all the clocks supported by the h/w > as suggested by the Datta. > --> Used IP clock names instead of shortcut clock names. > > Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > index fcc2b65..afe9eb7 100644 > --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > @@ -21,6 +21,11 @@ Required properties: > - dma-channel child node: Should have at least one channel and can have up to > two channels per device. This node specifies the properties of each > DMA channel (see child node properties below). > +- clocks: Input clock specifier. Refer to common clock bindings. > +- clock-names: List of input clocks "s_axi_lite_aclk", "m_axi_mm2s_aclk" > + "m_axi_s2mm_aclk", "m_axis_mm2s_aclk", "s_axis_s2mm_aclk" > + (list of input cloks may vary based on the ip configuration. s/cloks/clocks Acked-by: S?ren Brinkmann S?ren