[PATCH] ARM64: dts: rockchip: add core dtsi file for rk3399 SoCs

[briannorris@chromium.org (Brian Norris)]

Hi,

On Wed, Apr 20, 2016 at 11:15:50AM +0800, Jianqun Xu wrote:
> This patch adds core dtsi file for rk3399 found on Rockchip
> rk3399 SoCs, tested on rk3399 evb.
> 
> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1744 ++++++++++++++++++++++++++++++
>  1 file changed, 1744 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399.dtsi
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> new file mode 100644
> index 0000000..fa6fc2c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
> @@ -0,0 +1,1744 @@
[...]

> +	emmc_phy: phy {
> +		compatible = "rockchip,rk3399-emmc-phy";
> +		reg-offset = <0xf780>;

This property is not documented. The current doc says we "require" reg,
but you're kinda misusing it, I believe. At any rate, the current phy
driver won't probe without 'reg'.

> +		#phy-cells = <0>;
> +		rockchip,grf = <&grf>;
> +		status = "disabled";
> +	};

[...]

Brian