From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] ARM: remove duplicate const qualifier
Date: Mon, 25 Apr 2016 11:57:15 +0200 [thread overview]
Message-ID: <20160425095715.GA2366@piout.net> (raw)
In-Reply-To: <1461577678-29517-4-git-send-email-eric.engestrom@imgtec.com>
Hi,
this requires a commit message.
Also, you should think about separating those changes in multiple patches
to ease inclusion in the kernel.
On 25/04/2016 at 10:47:57 +0100, Eric Engestrom wrote :
> Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
> ---
> arch/arm/mach-at91/pm.c | 2 +-
> arch/arm/mach-bcm/bcm_kona_smc.c | 2 +-
> arch/arm/mach-clps711x/board-autcpu12.c | 2 +-
> arch/arm/mach-cns3xxx/core.c | 2 +-
> arch/arm/mach-davinci/da8xx-dt.c | 2 +-
> arch/arm/mach-lpc32xx/phy3250.c | 2 +-
> arch/arm/mach-mxs/mach-mxs.c | 2 +-
> arch/arm/mach-omap2/prm_common.c | 2 +-
> arch/arm/mach-omap2/vc.c | 2 +-
> arch/arm/mach-spear/time.c | 2 +-
> 10 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index f062701..9ef8604 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -318,7 +318,7 @@ static void at91sam9_sdram_standby(void)
> at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
> }
>
> -static const struct of_device_id const ramc_ids[] __initconst = {
> +static const struct of_device_id ramc_ids[] __initconst = {
> { .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
> { .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
> { .compatible = "atmel,at91sam9g45-ddramc", .data = at91_ddr_standby },
> diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c
> index cf3f865..a55a7ec 100644
> --- a/arch/arm/mach-bcm/bcm_kona_smc.c
> +++ b/arch/arm/mach-bcm/bcm_kona_smc.c
> @@ -33,7 +33,7 @@ struct bcm_kona_smc_data {
> unsigned result;
> };
>
> -static const struct of_device_id const bcm_kona_smc_ids[] __initconst = {
> +static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
> {.compatible = "brcm,kona-smc"},
> {.compatible = "bcm,kona-smc"}, /* deprecated name */
> {},
> diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
> index ba3d7d1..4fdfd92 100644
> --- a/arch/arm/mach-clps711x/board-autcpu12.c
> +++ b/arch/arm/mach-clps711x/board-autcpu12.c
> @@ -160,7 +160,7 @@ static struct platform_device autcpu12_mmgpio_pdev __initdata = {
> },
> };
>
> -static const struct gpio const autcpu12_gpios[] __initconst = {
> +static const struct gpio autcpu12_gpios[] __initconst = {
> { AUTCPU12_DPOT_CS, GPIOF_OUT_INIT_HIGH, "DPOT CS" },
> { AUTCPU12_DPOT_CLK, GPIOF_OUT_INIT_LOW, "DPOT CLK" },
> { AUTCPU12_DPOT_UD, GPIOF_OUT_INIT_LOW, "DPOT UD" },
> diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
> index 9b1dc22..e17a0e02 100644
> --- a/arch/arm/mach-cns3xxx/core.c
> +++ b/arch/arm/mach-cns3xxx/core.c
> @@ -346,7 +346,7 @@ static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = {
> .power_off = csn3xxx_usb_power_off,
> };
>
> -static const struct of_dev_auxdata const cns3xxx_auxdata[] __initconst = {
> +static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = {
> { "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata },
> { "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata },
> { "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL },
> diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
> index c4b5808..3d92c93 100644
> --- a/arch/arm/mach-davinci/da8xx-dt.c
> +++ b/arch/arm/mach-davinci/da8xx-dt.c
> @@ -20,7 +20,7 @@
>
> #define DA8XX_NUM_UARTS 3
>
> -static const struct of_device_id const da8xx_irq_match[] __initconst = {
> +static const struct of_device_id da8xx_irq_match[] __initconst = {
> { .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
> { }
> };
> diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
> index b2f9e22..1ae7230 100644
> --- a/arch/arm/mach-lpc32xx/phy3250.c
> +++ b/arch/arm/mach-lpc32xx/phy3250.c
> @@ -159,7 +159,7 @@ static struct lpc32xx_mlc_platform_data lpc32xx_mlc_data = {
> .dma_filter = pl08x_filter_id,
> };
>
> -static const struct of_dev_auxdata const lpc32xx_auxdata_lookup[] __initconst = {
> +static const struct of_dev_auxdata lpc32xx_auxdata_lookup[] __initconst = {
> OF_DEV_AUXDATA("arm,pl022", 0x20084000, "dev:ssp0", NULL),
> OF_DEV_AUXDATA("arm,pl022", 0x2008C000, "dev:ssp1", NULL),
> OF_DEV_AUXDATA("arm,pl110", 0x31040000, "dev:clcd", &lpc32xx_clcd_data),
> diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
> index f1ea470..19eeaec 100644
> --- a/arch/arm/mach-mxs/mach-mxs.c
> +++ b/arch/arm/mach-mxs/mach-mxs.c
> @@ -282,7 +282,7 @@ static void __init apx4devkit_init(void)
> #define TX28_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
> #define TX28_FEC_nINT MXS_GPIO_NR(4, 5)
>
> -static const struct gpio const tx28_gpios[] __initconst = {
> +static const struct gpio tx28_gpios[] __initconst = {
> { ENET0_MDC__GPIO_4_0, GPIOF_OUT_INIT_LOW, "GPIO_4_0" },
> { ENET0_MDIO__GPIO_4_1, GPIOF_OUT_INIT_LOW, "GPIO_4_1" },
> { ENET0_RX_EN__GPIO_4_2, GPIOF_OUT_INIT_LOW, "GPIO_4_2" },
> diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
> index 5b2f513..f1ca947 100644
> --- a/arch/arm/mach-omap2/prm_common.c
> +++ b/arch/arm/mach-omap2/prm_common.c
> @@ -713,7 +713,7 @@ static struct omap_prcm_init_data scrm_data __initdata = {
> };
> #endif
>
> -static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = {
> +static const struct of_device_id omap_prcm_dt_match_table[] __initconst = {
> #ifdef CONFIG_SOC_AM33XX
> { .compatible = "ti,am3-prcm", .data = &am3_prm_data },
> #endif
> diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
> index 2028167f..d76b1e5 100644
> --- a/arch/arm/mach-omap2/vc.c
> +++ b/arch/arm/mach-omap2/vc.c
> @@ -559,7 +559,7 @@ struct i2c_init_data {
> u8 hsscll_12;
> };
>
> -static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = {
> +static const struct i2c_init_data omap4_i2c_timing_data[] __initconst = {
> {
> .load = 50,
> .loadbits = 0x3,
> diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c
> index 9ccffc1..aaaa678 100644
> --- a/arch/arm/mach-spear/time.c
> +++ b/arch/arm/mach-spear/time.c
> @@ -204,7 +204,7 @@ static void __init spear_clockevent_init(int irq)
> setup_irq(irq, &spear_timer_irq);
> }
>
> -static const struct of_device_id const timer_of_match[] __initconst = {
> +static const struct of_device_id timer_of_match[] __initconst = {
> { .compatible = "st,spear-timer", },
> { },
> };
> --
> 2.7.4
>
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2016-04-25 9:57 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1461577678-29517-1-git-send-email-eric.engestrom@imgtec.com>
2016-04-25 9:47 ` [PATCH 2/4] drivers: firmware: psci: remove duplicate const qualifier Eric Engestrom
2016-04-25 10:33 ` Jisheng Zhang
2016-04-25 9:47 ` [PATCH 3/4] dmaengine: pxa_dma: " Eric Engestrom
2016-04-25 19:18 ` Robert Jarzmik
2016-04-26 16:30 ` Vinod Koul
2016-04-25 9:47 ` [PATCH 4/4] ARM: " Eric Engestrom
2016-04-25 9:52 ` Viresh Kumar
2016-04-25 9:57 ` Alexandre Belloni [this message]
2016-04-25 10:39 ` Eric Engestrom
2016-04-25 11:38 ` Arnd Bergmann
2016-04-25 12:58 ` Eric Engestrom
2016-04-25 14:12 ` Nicolas Pitre
2016-04-25 14:37 ` Eric Engestrom
2016-04-26 10:12 ` Krzysztof Hałasa
2016-04-27 20:01 ` Nicolas Pitre
2016-04-25 10:59 ` Sylvain Lemieux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160425095715.GA2366@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).