[PATCH v3 1/2] mfd: mt6397: irq domain should initialize before mfd_add_devices()

[PATCH v3 1/2] mfd: mt6397: irq domain should initialize before mfd_add_devices()

[Henry Chen]

Some sub driver like RTC module need irq domain from parent to create
irq mapping when driver initialize. so move mt6397_irq_init() before
mfd_add_devices().

Acked-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
---
This series fixed the below warning based on "Linux kernel v4.6-rc1"
WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471
irq_create_mapping+0xc4/0xd0
 
Changes in V2: Add two patch for error handle checking.
Changes in V3: Add interrupt as required properties to dt-bindings doc
---
 drivers/mfd/mt6397-core.c | 22 +++++++++++++---------
 1 file changed, 13 insertions(+), 9 deletions(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 8e8d932..b2faf56 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -267,15 +267,23 @@ static int mt6397_probe(struct platform_device *pdev)
 	ret = regmap_read(pmic->regmap, MT6397_CID, &id);
 	if (ret) {
 		dev_err(pmic->dev, "Failed to read chip id: %d\n", ret);
-		goto fail_irq;
+		return ret;
 	}
 
+	pmic->irq = platform_get_irq(pdev, 0);
+	if (pmic->irq <= 0)
+		return pmic->irq;
+
 	switch (id & 0xff) {
 	case MT6323_CID_CODE:
 		pmic->int_con[0] = MT6323_INT_CON0;
 		pmic->int_con[1] = MT6323_INT_CON1;
 		pmic->int_status[0] = MT6323_INT_STATUS0;
 		pmic->int_status[1] = MT6323_INT_STATUS1;
+		ret = mt6397_irq_init(pmic);
+		if (ret)
+			return ret;
+
 		ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs,
 				ARRAY_SIZE(mt6323_devs), NULL, 0, NULL);
 		break;
@@ -286,6 +294,10 @@ static int mt6397_probe(struct platform_device *pdev)
 		pmic->int_con[1] = MT6397_INT_CON1;
 		pmic->int_status[0] = MT6397_INT_STATUS0;
 		pmic->int_status[1] = MT6397_INT_STATUS1;
+		ret = mt6397_irq_init(pmic);
+		if (ret)
+			return ret;
+
 		ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs,
 				ARRAY_SIZE(mt6397_devs), NULL, 0, NULL);
 		break;
@@ -296,14 +308,6 @@ static int mt6397_probe(struct platform_device *pdev)
 		break;
 	}
 
-	pmic->irq = platform_get_irq(pdev, 0);
-	if (pmic->irq > 0) {
-		ret = mt6397_irq_init(pmic);
-		if (ret)
-			return ret;
-	}
-
-fail_irq:
 	if (ret) {
 		irq_domain_remove(pmic->irq_domain);
 		dev_err(&pdev->dev, "failed to add child devices: %d\n", ret);
-- 
1.8.1.1.dirty

[PATCH v3 2/2] dt-bindings: ARM: Mediatek: add interrupt as required properties to the mt6397/mt6323 doc

[Henry Chen]

MT6397/MT6323 have one interrupt line connected to the main SoC.
Interrupt should be required feature of pmic, each sub module also
need it to complete their function or error detect, add it as
required properties on dts file.

Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
---
 Documentation/devicetree/bindings/mfd/mt6397.txt | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 949c85f..a96529e 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -15,7 +15,13 @@ Documentation/devicetree/bindings/soc/pwrap.txt
 This document describes the binding for MFD device and its sub module.
 
 Required properties:
-compatible: "mediatek,mt6397" or "mediatek,mt6323"
+- compatible: "mediatek,mt6397" or "mediatek,mt6323"
+- interrupts: mt6323/mt6397 have one interrupt line connecteded to the main SoC
+- interrupt-parent: The parent interrupt controller
+- interrupt-controller : marks the device node as an interrupt controller
+- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
+  The first cell is the IRQ number.
+  The second cell is the flags, encoded as the trigger masks from
 
 Optional subnodes:
 
@@ -43,6 +49,10 @@ Example:
 
 		pmic {
 			compatible = "mediatek,mt6397";
+			interrupt-parent = <&pio>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
 
 			codec: mt6397codec {
 				compatible = "mediatek,mt6397-codec";
-- 
1.8.1.1.dirty

[PATCH v3 2/2] dt-bindings: ARM: Mediatek: add interrupt as required properties to the mt6397/mt6323 doc

[Lee Jones]

On Fri, 15 Apr 2016, Henry Chen wrote:

> MT6397/MT6323 have one interrupt line connected to the main SoC.
> Interrupt should be required feature of pmic, each sub module also
> need it to complete their function or error detect, add it as
> required properties on dts file.
> 
> Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
> index 949c85f..a96529e 100644
> --- a/Documentation/devicetree/bindings/mfd/mt6397.txt
> +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
> @@ -15,7 +15,13 @@ Documentation/devicetree/bindings/soc/pwrap.txt
>  This document describes the binding for MFD device and its sub module.
>  
>  Required properties:
> -compatible: "mediatek,mt6397" or "mediatek,mt6323"
> +- compatible: "mediatek,mt6397" or "mediatek,mt6323"
> +- interrupts: mt6323/mt6397 have one interrupt line connecteded to the main SoC
> +- interrupt-parent: The parent interrupt controller
> +- interrupt-controller : marks the device node as an interrupt controller

Nit: All sentences should start with an upper case char.

The device node is not an interrupt controller -- it's a device node.

The device the device node represents is the interrupt controller.

Look at how others describe this property, it's pretty well used.

> +- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.

Nit: Captial letter.

> +  The first cell is the IRQ number.
> +  The second cell is the flags, encoded as the trigger masks from
>  
>  Optional subnodes:
>  
> @@ -43,6 +49,10 @@ Example:
>  
>  		pmic {
>  			compatible = "mediatek,mt6397";
> +			interrupt-parent = <&pio>;
> +			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
>  
>  			codec: mt6397codec {
>  				compatible = "mediatek,mt6397-codec";

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH v3 1/2] mfd: mt6397: irq domain should initialize before mfd_add_devices()

[Lee Jones]

On Fri, 15 Apr 2016, Henry Chen wrote:

> Some sub driver like RTC module need irq domain from parent to create
> irq mapping when driver initialize. so move mt6397_irq_init() before
> mfd_add_devices().
> 
> Acked-by: John Crispin <blogic@openwrt.org>
> Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
> ---
> This series fixed the below warning based on "Linux kernel v4.6-rc1"
> WARNING: CPU: 1 PID: 132 at kernel/mediatek/kernel/irq/irqdomain.c:471
> irq_create_mapping+0xc4/0xd0
>  
> Changes in V2: Add two patch for error handle checking.
> Changes in V3: Add interrupt as required properties to dt-bindings doc
> ---
>  drivers/mfd/mt6397-core.c | 22 +++++++++++++---------
>  1 file changed, 13 insertions(+), 9 deletions(-)

Applied, thanks.

> diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
> index 8e8d932..b2faf56 100644
> --- a/drivers/mfd/mt6397-core.c
> +++ b/drivers/mfd/mt6397-core.c
> @@ -267,15 +267,23 @@ static int mt6397_probe(struct platform_device *pdev)
>  	ret = regmap_read(pmic->regmap, MT6397_CID, &id);
>  	if (ret) {
>  		dev_err(pmic->dev, "Failed to read chip id: %d\n", ret);
> -		goto fail_irq;
> +		return ret;
>  	}
>  
> +	pmic->irq = platform_get_irq(pdev, 0);
> +	if (pmic->irq <= 0)
> +		return pmic->irq;
> +
>  	switch (id & 0xff) {
>  	case MT6323_CID_CODE:
>  		pmic->int_con[0] = MT6323_INT_CON0;
>  		pmic->int_con[1] = MT6323_INT_CON1;
>  		pmic->int_status[0] = MT6323_INT_STATUS0;
>  		pmic->int_status[1] = MT6323_INT_STATUS1;
> +		ret = mt6397_irq_init(pmic);
> +		if (ret)
> +			return ret;
> +
>  		ret = mfd_add_devices(&pdev->dev, -1, mt6323_devs,
>  				ARRAY_SIZE(mt6323_devs), NULL, 0, NULL);
>  		break;
> @@ -286,6 +294,10 @@ static int mt6397_probe(struct platform_device *pdev)
>  		pmic->int_con[1] = MT6397_INT_CON1;
>  		pmic->int_status[0] = MT6397_INT_STATUS0;
>  		pmic->int_status[1] = MT6397_INT_STATUS1;
> +		ret = mt6397_irq_init(pmic);
> +		if (ret)
> +			return ret;
> +
>  		ret = mfd_add_devices(&pdev->dev, -1, mt6397_devs,
>  				ARRAY_SIZE(mt6397_devs), NULL, 0, NULL);
>  		break;
> @@ -296,14 +308,6 @@ static int mt6397_probe(struct platform_device *pdev)
>  		break;
>  	}
>  
> -	pmic->irq = platform_get_irq(pdev, 0);
> -	if (pmic->irq > 0) {
> -		ret = mt6397_irq_init(pmic);
> -		if (ret)
> -			return ret;
> -	}
> -
> -fail_irq:
>  	if (ret) {
>  		irq_domain_remove(pmic->irq_domain);
>  		dev_err(&pdev->dev, "failed to add child devices: %d\n", ret);

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog