[PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle

[paulmck@linux.vnet.ibm.com (Paul E. McKenney)]

On Tue, Apr 26, 2016 at 03:52:29PM -0400, Steven Rostedt wrote:
> On Tue, 26 Apr 2016 12:51:21 -0700
> "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> wrote:
> 
> > On Tue, Apr 26, 2016 at 03:44:14PM -0400, Steven Rostedt wrote:
> > > On Tue, 26 Apr 2016 12:39:50 -0700
> > > Tony Lindgren <tony@atomide.com> wrote:
> > > 
> > >   
> > > > With these omap4 is now OK. But omap3 produces yet another warning,
> > > > See below :)
> > > > 
> > > > Regards,
> > > > 
> > > > Tony
> > > > 
> > > > 8< ------------------
> > > > ===============================
> > > > [ INFO: suspicious RCU usage. ]
> > > > 4.6.0-rc5-next-20160426+ #1114 Not tainted
> > > > -------------------------------
> > > > include/trace/events/clk.h:59 suspicious rcu_dereference_check() usage!
> > > > 
> > > > other info that might help us debug this:
> > > > 
> > > > 
> > > > RCU used illegally from idle CPU!
> > > > rcu_scheduler_active = 1, debug_locks = 0
> > > > RCU used illegally from extended quiescent state!
> > > > 2 locks held by swapper/0/0:
> > > >  #0:  (&oh->hwmod_key#30){......}, at: [<c0121b40>] omap_hwmod_idle+0x18/0x44
> > > >  #1:  (enable_lock){......}, at: [<c0630998>] clk_enable_lock+0x18/0x124
> > > > 
> > > > stack backtrace:
> > > > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1114
> > > > Hardware name: Generic OMAP36xx (Flattened Device Tree)
> > > > [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
> > > > [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
> > > > [<c047fd68>] (dump_stack) from [<c0631618>] (clk_core_disable+0x17c/0x348)
> > > > [<c0631618>] (clk_core_disable) from [<c0632774>] (clk_disable+0x24/0x30)
> > > > [<c0632774>] (clk_disable) from [<c0120590>] (_disable_clocks+0x18/0x7c)
> > > > [<c0120590>] (_disable_clocks) from [<c0121680>] (_idle+0x12c/0x230)
> > > > [<c0121680>] (_idle) from [<c0121b4c>] (omap_hwmod_idle+0x24/0x44)
> > > > [<c0121b4c>] (omap_hwmod_idle) from [<c0122c24>] (omap_device_idle+0x3c/0x90)
> > > > [<c0122c24>] (omap_device_idle) from [<c052cc00>] (__rpm_callback+0x2c/0x60)
> > > > [<c052cc00>] (__rpm_callback) from [<c052cc54>] (rpm_callback+0x20/0x80)
> > > > [<c052cc54>] (rpm_callback) from [<c052d150>] (rpm_suspend+0x100/0x768)
> > > > [<c052d150>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84)
> > > > [<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5
> > > > c/0x70)
> > > > [<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x2
> > > > 44)
> > > > [<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
> > > > [<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4)
> > > > [<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
> > > > [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
> > > > [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)  
> > > 
> > > *Whack* *Whack* *Whack*!!!
> > > 
> > > Signed-off-by: Steven Rostedt <rostedt@goodmis.org>  
> > 
> > Or use Steven's identical patch, your choice.  ;-)
> 
> I don't care which you use. But if you use mine, you must keep the
> *Whack* *Whack* *Whack*!!! in the change log.

I included it in the last one.  ;-)

							Thanx, Paul