linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
Date: Tue, 26 Apr 2016 13:25:39 -0700	[thread overview]
Message-ID: <20160426202538.GS5995@atomide.com> (raw)
In-Reply-To: <20160426201134.GA29779@linux.vnet.ibm.com>

* Paul E. McKenney <paulmck@linux.vnet.ibm.com> [160426 13:12]:
> On Tue, Apr 26, 2016 at 01:06:13PM -0700, Paul E. McKenney wrote:
> > On Tue, Apr 26, 2016 at 12:51:59PM -0700, Tony Lindgren wrote:
> > > * Steven Rostedt <rostedt@goodmis.org> [160426 12:45]:
> > > > *Whack* *Whack* *Whack*!!!
> > > > 
> > > > Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
> > > > ---
> > > > diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> > > > index fb74dc1f7520..4fa43c02d682 100644
> > > > --- a/drivers/clk/clk.c
> > > > +++ b/drivers/clk/clk.c
> > > > @@ -682,12 +682,12 @@ static void clk_core_disable(struct clk_core *core)
> > > >  	if (--core->enable_count > 0)
> > > >  		return;
> > > >  
> > > > -	trace_clk_disable(core);
> > > > +	trace_clk_disable_rcuidle(core);
> > > >  
> > > >  	if (core->ops->disable)
> > > >  		core->ops->disable(core->hw);
> > > >  
> > > > -	trace_clk_disable_complete(core);
> > > > +	trace_clk_disable_complete_rcuidle(core);
> > > >  
> > > >  	clk_core_disable(core->parent);
> > > >  }
> > > 
> > > Now the mole shows up here!
> > 
> > And the patch shows up here!
> 
> And I bet you will need this one as well...

OK and now the mode is coming back after a short nap during idle:

===============================
[ INFO: suspicious RCU usage. ]
4.6.0-rc5-next-20160426+ #1122 Not tainted
-------------------------------
include/trace/events/rpm.h:69 suspicious rcu_dereference_check() usage!

other info that might help us debug this:


RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 0
RCU used illegally from extended quiescent state!
1 lock held by swapper/0/0:
 #0:  (&(&dev->power.lock)->rlock){-.-...}, at: [<c052e3dc>] __pm_runtime_resume+0x3c/0x64

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1122
Hardware name: Generic OMAP36xx (Flattened Device Tree)
[<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
[<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
[<c047fd68>] (dump_stack) from [<c052e178>] (rpm_resume+0x5cc/0x7f4)
[<c052e178>] (rpm_resume) from [<c052e3ec>] (__pm_runtime_resume+0x4c/0x64)
[<c052e3ec>] (__pm_runtime_resume) from [<c04bf2c4>] (omap2_gpio_resume_after_idle+0x54/0x68)
[<c04bf2c4>] (omap2_gpio_resume_after_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
[<c01269dc>] (omap3_enter_idle_bm) from [<c060198c>] (cpuidle_enter_state+0x80/0x3d4)
[<c060198c>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
[<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
[<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)

  reply	other threads:[~2016-04-26 20:25 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-25 20:48 [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle Paul E. McKenney
2016-04-26 15:00 ` Tony Lindgren
2016-04-26 17:52   ` Paul E. McKenney
2016-04-26 18:29     ` Tony Lindgren
2016-04-26 19:07       ` Paul E. McKenney
2016-04-26 19:39         ` Tony Lindgren
2016-04-26 19:44           ` Steven Rostedt
2016-04-26 19:51             ` Paul E. McKenney
2016-04-26 19:52               ` Steven Rostedt
2016-04-26 20:06                 ` Paul E. McKenney
2016-04-26 19:51             ` Tony Lindgren
2016-04-26 20:06               ` Paul E. McKenney
2016-04-26 20:11                 ` Paul E. McKenney
2016-04-26 20:25                   ` Tony Lindgren [this message]
2016-04-26 20:41                     ` Paul E. McKenney
2016-04-26 20:46                       ` Tony Lindgren
2016-04-26 20:52                         ` Steven Rostedt
2016-04-26 21:08                           ` Paul E. McKenney
2016-04-26 21:04                         ` Paul E. McKenney
2016-04-26 21:12                           ` Tony Lindgren
2016-04-26 21:26                             ` Paul E. McKenney
2016-04-26 21:36                               ` Tony Lindgren
2016-04-26 20:16                 ` Steven Rostedt
2016-04-26 20:36                   ` Paul E. McKenney
2016-04-26 19:47           ` Paul E. McKenney
2016-04-26 19:17       ` Steven Rostedt
2016-04-26 19:41         ` Tony Lindgren
2016-04-26 19:42         ` Paul E. McKenney
2016-04-26 19:49           ` Steven Rostedt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160426202538.GS5995@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).