linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: paulmck@linux.vnet.ibm.com (Paul E. McKenney)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle
Date: Tue, 26 Apr 2016 14:04:07 -0700	[thread overview]
Message-ID: <20160426210407.GT3715@linux.vnet.ibm.com> (raw)
In-Reply-To: <20160426204613.GT5995@atomide.com>

On Tue, Apr 26, 2016 at 01:46:15PM -0700, Tony Lindgren wrote:
> * Paul E. McKenney <paulmck@linux.vnet.ibm.com> [160426 13:42]:
> > On Tue, Apr 26, 2016 at 01:25:39PM -0700, Tony Lindgren wrote:
> > > * Paul E. McKenney <paulmck@linux.vnet.ibm.com> [160426 13:12]:
> > > > On Tue, Apr 26, 2016 at 01:06:13PM -0700, Paul E. McKenney wrote:
> > > > > On Tue, Apr 26, 2016 at 12:51:59PM -0700, Tony Lindgren wrote:
> > > > > > * Steven Rostedt <rostedt@goodmis.org> [160426 12:45]:
> > > > > > > *Whack* *Whack* *Whack*!!!
> > > > > > > 
> > > > > > > Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
> > > > > > > ---
> > > > > > > diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> > > > > > > index fb74dc1f7520..4fa43c02d682 100644
> > > > > > > --- a/drivers/clk/clk.c
> > > > > > > +++ b/drivers/clk/clk.c
> > > > > > > @@ -682,12 +682,12 @@ static void clk_core_disable(struct clk_core *core)
> > > > > > >  	if (--core->enable_count > 0)
> > > > > > >  		return;
> > > > > > >  
> > > > > > > -	trace_clk_disable(core);
> > > > > > > +	trace_clk_disable_rcuidle(core);
> > > > > > >  
> > > > > > >  	if (core->ops->disable)
> > > > > > >  		core->ops->disable(core->hw);
> > > > > > >  
> > > > > > > -	trace_clk_disable_complete(core);
> > > > > > > +	trace_clk_disable_complete_rcuidle(core);
> > > > > > >  
> > > > > > >  	clk_core_disable(core->parent);
> > > > > > >  }
> > > > > > 
> > > > > > Now the mole shows up here!
> > > > > 
> > > > > And the patch shows up here!
> > > > 
> > > > And I bet you will need this one as well...
> > > 
> > > OK and now the mode is coming back after a short nap during idle:
> > 
> > Seems a bit unfair to whack it just after a short nap, but here goes!
> 
> This mode seems pretty hard headed :) Now clk_core_enable:

Nah, just a lot of heads...

							Thanx, Paul

------------------------------------------------------------------------

commit 21c3fc2373886a9fa014f0f69a72186377758f4b
Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Date:   Tue Apr 26 14:02:23 2016 -0700

    arm: Whack an expected event-trace-from-idle mole
    
    This commit fixes the RCU use-from-idle bug corresponding the following
    splat:
    
    > [ INFO: suspicious RCU usage. ]
    > 4.6.0-rc5-next-20160426+ #1127 Not tainted
    > -------------------------------
    > include/trace/events/clk.h:45 suspicious rcu_dereference_check() usage!
    >
    > other info that might help us debug this:
    >
    >
    > RCU used illegally from idle CPU!
    > rcu_scheduler_active = 1, debug_locks = 0
    > RCU used illegally from extended quiescent state!
    > 2 locks held by swapper/0/0:
    >  #0:  (&oh->hwmod_key#30){......}, at: [<c0121afc>] omap_hwmod_enable+0x18/0x44
    >  #1:  (enable_lock){......}, at: [<c0630684>] clk_enable_lock+0x18/0x124
    >
    > stack backtrace:
    > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1127
    > Hardware name: Generic OMAP36xx (Flattened Device Tree)
    > [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
    > [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
    > [<c047fd68>] (dump_stack) from [<c06315c0>] (clk_core_enable+0x1e0/0x36c)
    > [<c06315c0>] (clk_core_enable) from [<c0632298>] (clk_enable+0x1c/0x38)
    > [<c0632298>] (clk_enable) from [<c01204e0>] (_enable_clocks+0x18/0x7c)
    > [<c01204e0>] (_enable_clocks) from [<c012137c>] (_enable+0x114/0x2ec)
    > [<c012137c>] (_enable) from [<c0121b08>] (omap_hwmod_enable+0x24/0x44)
    > [<c0121b08>] (omap_hwmod_enable) from [<c0122ad0>] (omap_device_enable+0x3c/0x90)
    > [<c0122ad0>] (omap_device_enable) from [<c0122b34>] (_od_runtime_resume+0x10/0x38)
    > [<c0122b34>] (_od_runtime_resume) from [<c052cc00>] (__rpm_callback+0x2c/0x60)
    > [<c052cc00>] (__rpm_callback) from [<c052cc54>] (rpm_callback+0x20/0x80)
    > [<c052cc54>] (rpm_callback) from [<c052df7c>] (rpm_resume+0x3d0/0x6f0)
    > [<c052df7c>] (rpm_resume) from [<c052e2e8>] (__pm_runtime_resume+0x4c/0x64)
    > [<c052e2e8>] (__pm_runtime_resume) from [<c04bf2c4>] (omap2_gpio_resume_after_idle+0x54/0x68)
    > [<c04bf2c4>] (omap2_gpio_resume_after_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
    > [<c01269dc>] (omap3_enter_idle_bm) from [<c0601888>] (cpuidle_enter_state+0x80/0x3d4)
    > [<c0601888>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
    > [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
    > [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)
    
    Reported-by: Tony Lindgren <tony@atomide.com>
    Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
    Cc: Tony Lindgren <tony@atomide.com>
    Cc: Russell King <linux@arm.linux.org.uk>
    Cc: Steven Rostedt <rostedt@goodmis.org>
    Cc: <linux-omap@vger.kernel.org>
    Cc: <linux-arm-kernel@lists.infradead.org>

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 4fa43c02d682..ec83f404c1d2 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -735,12 +735,12 @@ static int clk_core_enable(struct clk_core *core)
 		if (ret)
 			return ret;
 
-		trace_clk_enable(core);
+		trace_clk_enable_rcuidle(core);
 
 		if (core->ops->enable)
 			ret = core->ops->enable(core->hw);
 
-		trace_clk_enable_complete(core);
+		trace_clk_enable_complete_rcuidle(core);
 
 		if (ret) {
 			clk_core_disable(core->parent);

  parent reply	other threads:[~2016-04-26 21:04 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-25 20:48 [PATCH arm 1/1] arm: Use _rcuidle tracepoint to allow use from idle Paul E. McKenney
2016-04-26 15:00 ` Tony Lindgren
2016-04-26 17:52   ` Paul E. McKenney
2016-04-26 18:29     ` Tony Lindgren
2016-04-26 19:07       ` Paul E. McKenney
2016-04-26 19:39         ` Tony Lindgren
2016-04-26 19:44           ` Steven Rostedt
2016-04-26 19:51             ` Paul E. McKenney
2016-04-26 19:52               ` Steven Rostedt
2016-04-26 20:06                 ` Paul E. McKenney
2016-04-26 19:51             ` Tony Lindgren
2016-04-26 20:06               ` Paul E. McKenney
2016-04-26 20:11                 ` Paul E. McKenney
2016-04-26 20:25                   ` Tony Lindgren
2016-04-26 20:41                     ` Paul E. McKenney
2016-04-26 20:46                       ` Tony Lindgren
2016-04-26 20:52                         ` Steven Rostedt
2016-04-26 21:08                           ` Paul E. McKenney
2016-04-26 21:04                         ` Paul E. McKenney [this message]
2016-04-26 21:12                           ` Tony Lindgren
2016-04-26 21:26                             ` Paul E. McKenney
2016-04-26 21:36                               ` Tony Lindgren
2016-04-26 20:16                 ` Steven Rostedt
2016-04-26 20:36                   ` Paul E. McKenney
2016-04-26 19:47           ` Paul E. McKenney
2016-04-26 19:17       ` Steven Rostedt
2016-04-26 19:41         ` Tony Lindgren
2016-04-26 19:42         ` Paul E. McKenney
2016-04-26 19:49           ` Steven Rostedt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160426210407.GT3715@linux.vnet.ibm.com \
    --to=paulmck@linux.vnet.ibm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).