From mboxrd@z Thu Jan  1 00:00:00 1970
From: shawnguo@kernel.org (Shawn Guo)
Date: Tue, 3 May 2016 16:37:19 +0800
Subject: [PATCH] ARM: dts: imx6sx-sdb: Add 198MHz operational point
In-Reply-To: <1461897267-20458-1-git-send-email-festevam@gmail.com>
References: <1461897267-20458-1-git-send-email-festevam@gmail.com>
Message-ID: <20160503083719.GD5874@tiger>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Thu, Apr 28, 2016 at 11:34:27PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
> 
> imx6sx-sdb has custom operating points entries because it has one
> power supply that drives both VDDARM_IN and VDDSOC_IN.
> 
> As per the MX6UL datasheet we have the following minimum voltages for
> 198 MHz operation (after adding the 25mV margin value):
> VDDARM_IN = 0.975 V
> VDDSOC_IN = 1.175 V
> 
> So use 1.175V for the 198MHz operation.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>

Applied, thanks.