[PATCH v4 0/3] Syscon support for iProc touchscreen driver

[PATCH v4 0/3] Syscon support for iProc touchscreen driver

[Raveendra Padasalagi]

This patchset is based on v4.5-rc3 tag and its tested on
Broadcom Cygnus SoC.

The patches can be fetched from iproc-tsc-v4 branch of
https://github.com/Broadcom/arm64-linux.git

Changes since v3:
 - Renamed touchscreen node "tsc" to "touchscreen" in dt binding document
 - Added support for syscon only based register access in touch screen
   driver and removed "regs" based register access. Updated dt binding
   document to reflect the changes.
 - Removed "brcm,iproc-touchscreen-syscon" compatible string support in
   dt binding document and touchscreen driver implementation.

Changes since v2:
 - Omitted '0x' in "tsc node" definition in dt documentation file
 - Omitted '0x' in "ts_adc_syscon" definition in dt documentation file
 - Added "brcm,iproc-ts-adc-syscon" compatible string in "ts_adc_syscon"
   node. Updated dt documentation file to reflect this change.

Changes since v1:
 - Enhanced touchscreen driver to handle syscon based register access if
   "brcm,iproc-touchscreen-syscon" compatible string is provided in dt
 - Normal register access is handled through readl and writel API's if
   "brcm,iproc-touchscreen" compatible string is provided.
 - Updated touchscreen dt node document to reflect the new changes.
 - Updated change logs in each patchset to reflect the new changes

Raveendra Padasalagi (3):
  input: cygnus-update touchscreen dt node document
  input: syscon support in bcm_iproc_tsc driver
  ARM: dts: use syscon in cygnus touchscreen dt node

 .../input/touchscreen/brcm,iproc-touchscreen.txt   | 21 ++++--
 arch/arm/boot/dts/bcm-cygnus.dtsi                  | 11 ++-
 drivers/input/touchscreen/bcm_iproc_tsc.c          | 79 ++++++++++++----------
 3 files changed, 69 insertions(+), 42 deletions(-)

-- 
1.9.1

[PATCH v4 1/3] input: cygnus-update touchscreen dt node document

[Raveendra Padasalagi]

In Cygnus SOC touch screen controller registers are shared
with ADC and flex timer. Using readl/writel could lead to
race condition. So touch screen driver is enhanced to support
register access using syscon framework API's to take care of
mutually exclusive access.In addition to this existing touchscreen
node name "tsc" is renamed to "touchscreen".

Hence touchscreen dt node bindings document is updated to take care
of above changes in the touchscreen driver.

Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
 .../input/touchscreen/brcm,iproc-touchscreen.txt    | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
index 34e3382..25541f3 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/brcm,iproc-touchscreen.txt
@@ -2,11 +2,17 @@
 
 Required properties:
 - compatible: must be "brcm,iproc-touchscreen"
-- reg: physical base address of the controller and length of memory mapped
-  region.
+- ts_syscon: handler of syscon node defining physical base
+  address of the controller and length of memory mapped region.
+  If this property is selected please make sure MFD_SYSCON config
+  is enabled in the defconfig file.
 - clocks:  The clock provided by the SOC to driver the tsc
 - clock-name:  name for the clock
 - interrupts: The touchscreen controller's interrupt
+- address-cells: Specify the number of u32 entries needed in child nodes.
+  Should set to 1.
+- size-cells: Specify number of u32 entries needed to specify child nodes size
+  in reg property. Should set to 1.
 
 Optional properties:
 - scanning_period: Time between scans. Each step is 1024 us.  Valid 1-256.
@@ -53,13 +59,18 @@ Optional properties:
 - touchscreen-inverted-x: X axis is inverted (boolean)
 - touchscreen-inverted-y: Y axis is inverted (boolean)
 
-Example:
+Example: An example of touchscreen node
 
-	touchscreen: tsc at 0x180A6000 {
+	ts_adc_syscon: ts_adc_syscon at 180a6000 {
+		compatible = "brcm,iproc-ts-adc-syscon","syscon";
+		reg = <0x180a6000 0xc30>;
+	};
+
+	touchscreen: touchscreen at 180A6000 {
 		compatible = "brcm,iproc-touchscreen";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		reg = <0x180A6000 0x40>;
+		ts_syscon = <&ts_adc_syscon>;
 		clocks = <&adc_clk>;
 		clock-names = "tsc_clk";
 		interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-- 
1.9.1

[PATCH v4 1/3] input: cygnus-update touchscreen dt node document

[Rob Herring]

On Sat, Feb 27, 2016 at 12:29:54PM +0530, Raveendra Padasalagi wrote:
> In Cygnus SOC touch screen controller registers are shared
> with ADC and flex timer. Using readl/writel could lead to
> race condition. So touch screen driver is enhanced to support
> register access using syscon framework API's to take care of
> mutually exclusive access.In addition to this existing touchscreen
> node name "tsc" is renamed to "touchscreen".
> 
> Hence touchscreen dt node bindings document is updated to take care
> of above changes in the touchscreen driver.
> 
> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
> ---
>  .../input/touchscreen/brcm,iproc-touchscreen.txt    | 21 ++++++++++++++++-----
>  1 file changed, 16 insertions(+), 5 deletions(-)

Acked-by: Rob Herring <robh@kernel.org>

[PATCH v4 2/3] input: syscon support in bcm_iproc_tsc driver

[Raveendra Padasalagi]

In Cygnus SOC touch screen controller registers are shared
with ADC and flex timer. Using readl/writel could lead to
race condition. So touch screen driver is enhanced to support
register access using syscon framework API's to take care of
mutually exclusive access.

Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
 drivers/input/touchscreen/bcm_iproc_tsc.c | 79 +++++++++++++++++--------------
 1 file changed, 44 insertions(+), 35 deletions(-)

diff --git a/drivers/input/touchscreen/bcm_iproc_tsc.c b/drivers/input/touchscreen/bcm_iproc_tsc.c
index ae460a5c..9957587 100644
--- a/drivers/input/touchscreen/bcm_iproc_tsc.c
+++ b/drivers/input/touchscreen/bcm_iproc_tsc.c
@@ -23,6 +23,8 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/serio.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #define IPROC_TS_NAME "iproc-ts"
 
@@ -88,7 +90,11 @@
 #define TS_WIRE_MODE_BIT        BIT(1)
 
 #define dbg_reg(dev, priv, reg) \
-	dev_dbg(dev, "%20s= 0x%08x\n", #reg, readl((priv)->regs + reg))
+do { \
+	u32 val; \
+	regmap_read(priv->regmap, reg, &val); \
+	dev_dbg(dev, "%20s= 0x%08x\n", #reg, val); \
+} while (0)
 
 struct tsc_param {
 	/* Each step is 1024 us.  Valid 1-256 */
@@ -141,7 +147,7 @@ struct iproc_ts_priv {
 	struct platform_device *pdev;
 	struct input_dev *idev;
 
-	void __iomem *regs;
+	struct regmap *regmap;
 	struct clk *tsc_clk;
 
 	int  pen_status;
@@ -196,22 +202,22 @@ static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
 	int i;
 	bool needs_sync = false;
 
-	intr_status = readl(priv->regs + INTERRUPT_STATUS);
-	intr_status &= TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
+	regmap_read(priv->regmap, INTERRUPT_STATUS, &intr_status);
+	intr_status &= (TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK);
 	if (intr_status == 0)
 		return IRQ_NONE;
 
 	/* Clear all interrupt status bits, write-1-clear */
-	writel(intr_status, priv->regs + INTERRUPT_STATUS);
-
+	regmap_write(priv->regmap, INTERRUPT_STATUS, intr_status);
 	/* Pen up/down */
 	if (intr_status & TS_PEN_INTR_MASK) {
-		if (readl(priv->regs + CONTROLLER_STATUS) & TS_PEN_DOWN)
+		regmap_read(priv->regmap, CONTROLLER_STATUS, &priv->pen_status);
+		if (priv->pen_status & TS_PEN_DOWN)
 			priv->pen_status = PEN_DOWN_STATUS;
 		else
 			priv->pen_status = PEN_UP_STATUS;
 
-		input_report_key(priv->idev, BTN_TOUCH, priv->pen_status);
+		input_report_key(priv->idev, BTN_TOUCH,	priv->pen_status);
 		needs_sync = true;
 
 		dev_dbg(&priv->pdev->dev,
@@ -221,7 +227,7 @@ static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
 	/* coordinates in FIFO exceed the theshold */
 	if (intr_status & TS_FIFO_INTR_MASK) {
 		for (i = 0; i < priv->cfg_params.fifo_threshold; i++) {
-			raw_coordinate = readl(priv->regs + FIFO_DATA);
+			regmap_read(priv->regmap, FIFO_DATA, &raw_coordinate);
 			if (raw_coordinate == INVALID_COORD)
 				continue;
 
@@ -239,7 +245,7 @@ static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
 			x = (x >> 4) & 0x0FFF;
 			y = (y >> 4) & 0x0FFF;
 
-			/* adjust x y according to lcd tsc mount angle */
+			/* Adjust x y according to LCD tsc mount angle. */
 			if (priv->cfg_params.invert_x)
 				x = priv->cfg_params.max_x - x;
 
@@ -262,9 +268,10 @@ static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
 
 static int iproc_ts_start(struct input_dev *idev)
 {
-	struct iproc_ts_priv *priv = input_get_drvdata(idev);
 	u32 val;
+	u32 mask;
 	int error;
+	struct iproc_ts_priv *priv = input_get_drvdata(idev);
 
 	/* Enable clock */
 	error = clk_prepare_enable(priv->tsc_clk);
@@ -279,9 +286,10 @@ static int iproc_ts_start(struct input_dev *idev)
 	 *  FIFO reaches the int_th value, and pen event(up/down)
 	 */
 	val = TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
-	writel(val, priv->regs + INTERRUPT_MASK);
+	regmap_update_bits(priv->regmap, INTERRUPT_MASK, val, val);
 
-	writel(priv->cfg_params.fifo_threshold, priv->regs + INTERRUPT_THRES);
+	val = priv->cfg_params.fifo_threshold;
+	regmap_write(priv->regmap, INTERRUPT_THRES, val);
 
 	/* Initialize control reg1 */
 	val = 0;
@@ -289,26 +297,23 @@ static int iproc_ts_start(struct input_dev *idev)
 	val |= priv->cfg_params.debounce_timeout << DEBOUNCE_TIMEOUT_SHIFT;
 	val |= priv->cfg_params.settling_timeout << SETTLING_TIMEOUT_SHIFT;
 	val |= priv->cfg_params.touch_timeout << TOUCH_TIMEOUT_SHIFT;
-	writel(val, priv->regs + REGCTL1);
+	regmap_write(priv->regmap, REGCTL1, val);
 
 	/* Try to clear all interrupt status */
-	val = readl(priv->regs + INTERRUPT_STATUS);
-	val |= TS_FIFO_INTR_MASK | TS_PEN_INTR_MASK;
-	writel(val, priv->regs + INTERRUPT_STATUS);
+	val = TS_FIFO_INTR_MASK | TS_PEN_INTR_MASK;
+	regmap_update_bits(priv->regmap, INTERRUPT_STATUS, val, val);
 
 	/* Initialize control reg2 */
-	val = readl(priv->regs + REGCTL2);
-	val |= TS_CONTROLLER_EN_BIT | TS_WIRE_MODE_BIT;
-
-	val &= ~TS_CONTROLLER_AVGDATA_MASK;
+	val = TS_CONTROLLER_EN_BIT | TS_WIRE_MODE_BIT;
 	val |= priv->cfg_params.average_data << TS_CONTROLLER_AVGDATA_SHIFT;
 
-	val &= ~(TS_CONTROLLER_PWR_LDO |	/* PWR up LDO */
+	mask = (TS_CONTROLLER_AVGDATA_MASK);
+	mask |= (TS_CONTROLLER_PWR_LDO |	/* PWR up LDO */
 		   TS_CONTROLLER_PWR_ADC |	/* PWR up ADC */
 		   TS_CONTROLLER_PWR_BGP |	/* PWR up BGP */
 		   TS_CONTROLLER_PWR_TS);	/* PWR up TS */
-
-	writel(val, priv->regs + REGCTL2);
+	mask |= val;
+	regmap_update_bits(priv->regmap, REGCTL2, mask, val);
 
 	ts_reg_dump(priv);
 
@@ -320,12 +325,17 @@ static void iproc_ts_stop(struct input_dev *dev)
 	u32 val;
 	struct iproc_ts_priv *priv = input_get_drvdata(dev);
 
-	writel(0, priv->regs + INTERRUPT_MASK); /* Disable all interrupts */
+	/*
+	 * Disable FIFO int_th and pen event(up/down)Interrupts only
+	 * as the interrupt mask register is shared between ADC, TS and
+	 * flextimer.
+	 */
+	val = TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
+	regmap_update_bits(priv->regmap, INTERRUPT_MASK, val, 0);
 
 	/* Only power down touch screen controller */
-	val = readl(priv->regs + REGCTL2);
-	val |= TS_CONTROLLER_PWR_TS;
-	writel(val, priv->regs + REGCTL2);
+	val = TS_CONTROLLER_PWR_TS;
+	regmap_update_bits(priv->regmap, REGCTL2, val, val);
 
 	clk_disable(priv->tsc_clk);
 }
@@ -414,7 +424,6 @@ static int iproc_ts_probe(struct platform_device *pdev)
 {
 	struct iproc_ts_priv *priv;
 	struct input_dev *idev;
-	struct resource *res;
 	int irq;
 	int error;
 
@@ -422,12 +431,12 @@ static int iproc_ts_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	/* touchscreen controller memory mapped regs */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->regs = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(priv->regs)) {
-		error = PTR_ERR(priv->regs);
-		dev_err(&pdev->dev, "unable to map I/O memory: %d\n", error);
+	/* touchscreen controller memory mapped regs via syscon*/
+	priv->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+							"ts_syscon");
+	if (IS_ERR(priv->regmap)) {
+		error = PTR_ERR(priv->regmap);
+		dev_err(&pdev->dev, "unable to map I/O memory:%d\n", error);
 		return error;
 	}
 
-- 
1.9.1

[PATCH v4 3/3] ARM: dts: use syscon in cygnus touchscreen dt node

[Raveendra Padasalagi]

In Cygnus SOC touch screen controller registers are shared
with ADC and flex timer. Using readl/writel could lead to
race condition. So touchscreen driver is enhanced to support
syscon based register access to take care of mutually exclusive
access.

This patch enables syscon support in touchscreen driver
by adding necessary properties in touchscreen dt node and
in addition to this renamed existing "tsc" touchscreen node
name to "touchscreen".

Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
 arch/arm/boot/dts/bcm-cygnus.dtsi | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 3878793..b42fe55 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -351,9 +351,16 @@
 					<&pinctrl 142 10 1>;
 		};
 
-		touchscreen: tsc at 180a6000 {
+		ts_adc_syscon: ts_adc_syscon at 180a6000 {
+			compatible = "brcm,iproc-ts-adc-syscon", "syscon";
+			reg = <0x180a6000 0xc30>;
+		};
+
+		touchscreen: touchscreen at 180a6000 {
 			compatible = "brcm,iproc-touchscreen";
-			reg = <0x180a6000 0x40>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_syscon = <&ts_adc_syscon>;
 			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
 			clock-names = "tsc_clk";
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
-- 
1.9.1

[PATCH v4 3/3] ARM: dts: use syscon in cygnus touchscreen dt node

[Dmitry Torokhov]

On Sat, Feb 27, 2016 at 12:29:56PM +0530, Raveendra Padasalagi wrote:
> In Cygnus SOC touch screen controller registers are shared
> with ADC and flex timer. Using readl/writel could lead to
> race condition. So touchscreen driver is enhanced to support
> syscon based register access to take care of mutually exclusive
> access.
> 
> This patch enables syscon support in touchscreen driver
> by adding necessary properties in touchscreen dt node and
> in addition to this renamed existing "tsc" touchscreen node
> name to "touchscreen".
> 
> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Scott Branden <scott.branden@broadcom.com>

OK, since the new dts is really needed for the driver I'll be folding
this into the touchscreen driver patch unless I hear someone yelling at
me.

Thanks!

> ---
>  arch/arm/boot/dts/bcm-cygnus.dtsi | 11 +++++++++--
>  1 file changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
> index 3878793..b42fe55 100644
> --- a/arch/arm/boot/dts/bcm-cygnus.dtsi
> +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
> @@ -351,9 +351,16 @@
>  					<&pinctrl 142 10 1>;
>  		};
>  
> -		touchscreen: tsc at 180a6000 {
> +		ts_adc_syscon: ts_adc_syscon at 180a6000 {
> +			compatible = "brcm,iproc-ts-adc-syscon", "syscon";
> +			reg = <0x180a6000 0xc30>;
> +		};
> +
> +		touchscreen: touchscreen at 180a6000 {
>  			compatible = "brcm,iproc-touchscreen";
> -			reg = <0x180a6000 0x40>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ts_syscon = <&ts_adc_syscon>;
>  			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
>  			clock-names = "tsc_clk";
>  			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
> -- 
> 1.9.1
> 

-- 
Dmitry

[PATCH v4 3/3] ARM: dts: use syscon in cygnus touchscreen dt node

[Florian Fainelli]

2016-04-06 10:31 GMT-07:00 Dmitry Torokhov <dmitry.torokhov@gmail.com>:
> On Sat, Feb 27, 2016 at 12:29:56PM +0530, Raveendra Padasalagi wrote:
>> In Cygnus SOC touch screen controller registers are shared
>> with ADC and flex timer. Using readl/writel could lead to
>> race condition. So touchscreen driver is enhanced to support
>> syscon based register access to take care of mutually exclusive
>> access.
>>
>> This patch enables syscon support in touchscreen driver
>> by adding necessary properties in touchscreen dt node and
>> in addition to this renamed existing "tsc" touchscreen node
>> name to "touchscreen".
>>
>> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
>> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
>> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
>
> OK, since the new dts is really needed for the driver I'll be folding
> this into the touchscreen driver patch unless I hear someone yelling at
> me.

Works for me:

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
--
Florian

[PATCH v4 3/3] ARM: dts: use syscon in cygnus touchscreen dt node

[Raveendra Padasalagi]

Thanks Dmitry and Florian.

Hi Dmitry,

I understand the dts changes are really needed for the touch screen
driver changes made in this patch. But currently there are no deployed
systems/customer's using this driver. So please pull the driver changes
and I will follow up to make sure dts changes also goes in.

Below is the latest patch set pushed.

https://lkml.org/lkml/2016/3/24/45


Thanks ,
Raveendra

On Thu, Apr 7, 2016 at 1:55 AM, Florian Fainelli <f.fainelli@gmail.com> wrote:
> 2016-04-06 10:31 GMT-07:00 Dmitry Torokhov <dmitry.torokhov@gmail.com>:
>> On Sat, Feb 27, 2016 at 12:29:56PM +0530, Raveendra Padasalagi wrote:
>>> In Cygnus SOC touch screen controller registers are shared
>>> with ADC and flex timer. Using readl/writel could lead to
>>> race condition. So touchscreen driver is enhanced to support
>>> syscon based register access to take care of mutually exclusive
>>> access.
>>>
>>> This patch enables syscon support in touchscreen driver
>>> by adding necessary properties in touchscreen dt node and
>>> in addition to this renamed existing "tsc" touchscreen node
>>> name to "touchscreen".
>>>
>>> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
>>> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
>>> Reviewed-by: Scott Branden <scott.branden@broadcom.com>
>>
>> OK, since the new dts is really needed for the driver I'll be folding
>> this into the touchscreen driver patch unless I hear someone yelling at
>> me.
>
> Works for me:
>
> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
> --
> Florian

[PATCH v4 3/3] ARM: dts: use syscon in cygnus touchscreen dt node

[Dmitry Torokhov]

Hi Raveendra,

On Thu, May 05, 2016 at 11:17:00AM +0530, Raveendra Padasalagi wrote:
> Thanks Dmitry and Florian.
> 
> Hi Dmitry,
> 
> I understand the dts changes are really needed for the touch screen
> driver changes made in this patch. But currently there are no deployed
> systems/customer's using this driver. So please pull the driver changes
> and I will follow up to make sure dts changes also goes in.
> 
> Below is the latest patch set pushed.
> 
> https://lkml.org/lkml/2016/3/24/45

I have the driver, binding doc changes, and changes to
arch/arm/boot/dts/bcm-cygnus.dtsi as
74813cebd678dd471b4fcd7d3019aecab9dbcedd in my 'next' branch, so it will
be merged in the next merge window.

Thanks.

-- 
Dmitry

[PATCH v4 0/3] Syscon support for iProc touchscreen driver

[Raveendra Padasalagi]

Hi Dmitry, Arnd,

Do you have any comments on this patch set [PATCH v4 0/3] ?

Thanks,
Raveendra

On Sat, Feb 27, 2016 at 12:29 PM, Raveendra Padasalagi
<raveendra.padasalagi@broadcom.com> wrote:
> This patchset is based on v4.5-rc3 tag and its tested on
> Broadcom Cygnus SoC.
>
> The patches can be fetched from iproc-tsc-v4 branch of
> https://github.com/Broadcom/arm64-linux.git
>
> Changes since v3:
>  - Renamed touchscreen node "tsc" to "touchscreen" in dt binding document
>  - Added support for syscon only based register access in touch screen
>    driver and removed "regs" based register access. Updated dt binding
>    document to reflect the changes.
>  - Removed "brcm,iproc-touchscreen-syscon" compatible string support in
>    dt binding document and touchscreen driver implementation.
>
> Changes since v2:
>  - Omitted '0x' in "tsc node" definition in dt documentation file
>  - Omitted '0x' in "ts_adc_syscon" definition in dt documentation file
>  - Added "brcm,iproc-ts-adc-syscon" compatible string in "ts_adc_syscon"
>    node. Updated dt documentation file to reflect this change.
>
> Changes since v1:
>  - Enhanced touchscreen driver to handle syscon based register access if
>    "brcm,iproc-touchscreen-syscon" compatible string is provided in dt
>  - Normal register access is handled through readl and writel API's if
>    "brcm,iproc-touchscreen" compatible string is provided.
>  - Updated touchscreen dt node document to reflect the new changes.
>  - Updated change logs in each patchset to reflect the new changes
>
> Raveendra Padasalagi (3):
>   input: cygnus-update touchscreen dt node document
>   input: syscon support in bcm_iproc_tsc driver
>   ARM: dts: use syscon in cygnus touchscreen dt node
>
>  .../input/touchscreen/brcm,iproc-touchscreen.txt   | 21 ++++--
>  arch/arm/boot/dts/bcm-cygnus.dtsi                  | 11 ++-
>  drivers/input/touchscreen/bcm_iproc_tsc.c          | 79 ++++++++++++----------
>  3 files changed, 69 insertions(+), 42 deletions(-)
>
> --
> 1.9.1
>