[PATCH v7 7/9] dt-bindings: i2c: rk3x: add support for rk3399

[robh@kernel.org (Rob Herring)]

On Wed, May 04, 2016 at 10:35:23PM +0800, David Wu wrote:
> The bus clock and function clock are separated at rk3399,
> and others use one clock as the bus clock and function clock.
> 
> Signed-off-by: David Wu <david.wu@rock-chips.com>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-rk3x.txt | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
> index 0b4a85f..82b6f6b 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
> @@ -6,10 +6,20 @@ RK3xxx SoCs.
>  Required properties :
>  
>   - reg : Offset and length of the register set for the device
> - - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c",
> -		"rockchip,rk3228-i2c" or "rockchip,rk3288-i2c".
> + - compatible: should be one of the followings

s/followings/following:/

> +   - "rockchip,rk3066-i2c": for rk3066
> +   - "rockchip,rk3188-i2c": for rk3188
> +   - "rockchip,rk3228-i2c": for rk3228
> +   - "rockchip,rk3288-i2c": for rk3288
> +   - "rockchip,rk3399-i2c": for rk3399
>   - interrupts : interrupt number
> - - clocks : parent clock
> + - clocks: See ../clock/clock-bindings.txt
> +   - For older hardware (rk3066, rk3188, rk3228, rk3288):
> +     - There is one clock that's used both to derive the functional clock
> +       for the device and as the bus clock.  REQUIRED.

This is the required section, so REQUIRED is redundant.

> +   - For newer hardware (rk3399): specify by name
> +     - "i2c": REQUIRED. This is used to derive the functional clock.
> +     - "pclk": REQUIRED. This is the bus clock.equired on RK3066, RK3188 :

This doesn't make sense. The first line says this applies to rk3399, but 
then here it is talking about other parts.

And there's a typo.

>  
>  Required on RK3066, RK3188 :
>  
> -- 
> 1.9.1
> 
>