linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 0/3] ARM/arm64: dts: renesas: Describe RTS/CTS hardware flow control
       [not found] <1462352278-30327-1-git-send-email-geert+renesas@glider.be>
@ 2016-05-05 23:49 ` Simon Horman
  0 siblings, 0 replies; only message in thread
From: Simon Horman @ 2016-05-05 23:49 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Geert,

On Wed, May 04, 2016 at 10:57:55AM +0200, Geert Uytterhoeven wrote:
> 	Hi Simon, Magnus,
> 
> This patch series updates the various Renesas DTSes to describe that
> some UARTS have dedicated lines for RTS/CTS hardware flow control, and
> that they are available for use (wired and enabled by pinmux
> configuration), by adding the "uart-has-rtscts" property to
> board-specific DTS files where appropriate.
> 
> While the actual DT binding updates documenting the "uart-has-rtscts"
> property for SCIF(A) UARTs ("serial: sh-sci: Update DT binding
> documentation for dedicated RTS/CTS") hasn't been accepted into tty-next
> yet, this property is part of the Generic Serial DT Bindings
> (Documentation/devicetree/bindings/serial/serial.txt), which has been
> accepted.

On the basis of the binding being present in the generic documentation
I have queued up these patches. If that was not your intention please
let me know.

> Actual enablement of RTS/CTS hardware flow control (through setting the
> CRTSCTS termios flag from userspace) depends on series "[PATCH v2 00/11]
> serial: sh-sci: Hardware Flow Control Updates"
> (http://www.spinics.net/lists/linux-serial/msg22535.html).
> Note that setting the CRTSCTS flag for a serial port that is being used
> as the kernel console is a bad idea ;-) You'll have better luck with
> UARTs on expansion connectors, cfr. the topic/renesas-overlays branch of
> https://git.kernel.org/cgit/linux/kernel/git/geert/renesas-drivers.git
> 
> Thanks!
> 
> Geert Uytterhoeven (3):
>   ARM: dts: bockw: SCIF0 supports RTS/CTS hardware flow control
>   ARM: dts: kzm9g: SCIFA4 supports RTS/CTS hardware flow control
>   arm64: dts: salvator-x: SCIF1 supports RTS/CTS hardware flow control
> 
>  arch/arm/boot/dts/r8a7778-bockw.dts                | 1 +
>  arch/arm/boot/dts/sh73a0-kzm9g.dts                 | 1 +
>  arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 1 +
>  3 files changed, 3 insertions(+)
> 
> -- 
> 1.9.1
> 
> Gr{oetje,eeting}s,
> 
> 						Geert
> 
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
> 
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> 							    -- Linus Torvalds
> 

^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2016-05-05 23:49 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <1462352278-30327-1-git-send-email-geert+renesas@glider.be>
2016-05-05 23:49 ` [PATCH 0/3] ARM/arm64: dts: renesas: Describe RTS/CTS hardware flow control Simon Horman

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).