From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Sun, 8 May 2016 20:09:41 +0200 Subject: [PATCHv4] ARM: dts: sunxi: Add a olinuxino-lime2-emmc In-Reply-To: <1462439332-26215-1-git-send-email-oliver@schinagl.nl> References: <1462439332-26215-1-git-send-email-oliver@schinagl.nl> Message-ID: <20160508180941.GC6167@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, May 05, 2016 at 11:08:52AM +0200, Olliver Schinagl wrote: > There are 3 kinds of OLinuXino Lime2 boards. > One without any on board storage, one with NAND storage and one with > eMMC storage. This patch adds the eMMC variant of boards. > > eMMC storage is different from a regular SD card in that it is soldered > on the board and cannot be changed. Additionally, it shares pins with > the NAND module and with the second SPI port. > > Changeslog: > > v4: > Add board compatibles > > v3: > Add pwr-seq-emmc with the reset gpio > > v2: > Remove unsupported no-1.8-v property, add vqmmc property > > v1: > Initial bare bone version This is not something we want in the commit log. This should go below the --- so that it's dropped when applied. Removed and applied. Thanks, Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: