[PATCH 15/16] clk: sunxi-ng: Add H3 clocks

[maxime.ripard@free-electrons.com (Maxime Ripard)]

Hi,

On Mon, May 16, 2016 at 03:47:39PM +0200, Jean-Francois Moine wrote:
> On Sun,  8 May 2016 22:01:50 +0200
> Maxime Ripard <maxime.ripard@free-electrons.com> wrote:
> 
> > Add the list of clocks and resets found in the H3 CCU.
> > 
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > ---
> >  drivers/clk/sunxi-ng/Makefile        |   2 +
> >  drivers/clk/sunxi-ng/ccu-sun8i-h3.c  | 757 +++++++++++++++++++++++++++++++++++
> >  include/dt-bindings/clock/sun8i-h3.h | 162 ++++++++
> >  include/dt-bindings/reset/sun8i-h3.h | 103 +++++
> >  4 files changed, 1024 insertions(+)
> >  create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-h3.c
> >  create mode 100644 include/dt-bindings/clock/sun8i-h3.h
> >  create mode 100644 include/dt-bindings/reset/sun8i-h3.h
> > 
> > diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> > index c794f57b6fb1..67ff6a92f124 100644
> > --- a/drivers/clk/sunxi-ng/Makefile
> > +++ b/drivers/clk/sunxi-ng/Makefile
> > @@ -13,3 +13,5 @@ obj-y += ccu_nkmp.o
> >  obj-y += ccu_nm.o
> >  obj-y += ccu_p.o
> >  obj-y += ccu_phase.o
> > +
> > +obj-y += ccu-sun8i-h3.o
> > diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
> > new file mode 100644
> > index 000000000000..5ce699e95c32
> > --- /dev/null
> > +++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
> > @@ -0,0 +1,757 @@
> 	[snip]
> > +static struct ccu_nm pll_audio_base_clk = {
> > +	.enable		= BIT(31),
> > +	.lock		= BIT(28),
> > +
> > +	.m		= SUNXI_CLK_FACTOR(0, 5),
> > +	.n		= SUNXI_CLK_FACTOR(8, 7),
> > +
> > +	.common		= {
> > +		.reg		= 0x008,
> > +		.features	= CCU_FEATURE_GATE | CCU_FEATURE_LOCK,
> > +		.hw.init	= SUNXI_HW_INIT("pll-audio-base",
> > +						"osc24M",
> > +						&ccu_nm_ops,
> > +						0),
> > +	},
> > +};
> > +
> > +static SUNXI_CCU_M(pll_audio_clk, "pll-audio", "pll-audio-base",
> > +		   0x008, 16, 4, 0);
> > +
> > +static SUNXI_CCU_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
> > +			      "pll-audio-base", 2, 1, 0);
> > +static SUNXI_CCU_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
> > +			      "pll-audio-base", 1, 1, 0);
> > +static SUNXI_CCU_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
> > +			      "pll-audio-base", 1, 2, 0);
> > +
> 	[snip]
> 
> The pll-audio-{2,4,8}x clocks lack the CLK_SET_RATE_PARENT.
> 
> Also, in my implementation of the sound on HDMI, I set pll-audio as the
> parent of the i2s2 clock. Then, as the pll-audio clock is defined here,
> setting its rate is always wrong (only 'M' is changed, and with a bad
> value - BTW, DIV_ROUND_UP would be welcome in ccu_m_find_best()).
> 
> As the pre-divider 'M' is set to 4 by default, there is no need to
> change it. Then, audio works fine for me with:
> 
> static SUNXI_CCU_FIXED_FACTOR(pll_audio, "pll-audio",
> 			      "pll-audio-base", 4, 1,
> 				CLK_SET_RATE_PARENT);

OK. I just changed it, we can always change it later if needs be.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160518/197395b9/attachment.sig>