[PATCH] arm64:efi fix the format of debug message from efi

[mark.rutland@arm.com (Mark Rutland)]

On Wed, May 25, 2016 at 07:16:14PM +0800, Dennis Chen wrote:
> When enable debug of efi and memblock with 'efi=debug memblock=debug' appended
> to the kernel command line, the debug message output for earyly_con looks like:
> [    0.000000] efi:   0x0000e1050000-0x0000e105ffff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
> [    0.000000] efi:   0x0000e1300000-0x0000e1300fff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
> [    0.000000] efi:   0x0000e8200000-0x0000e827ffff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
> [    0.000000] efi:   0x008000000000-0x008001e7ffff [Runtime Data       |RUN|  |  |  |  |  |  |   |WB|WT|WC|UC]
> [    0.000000] memblock_add: [0x00008000000000-0x00008001e7ffff] flags 0x0 early_init_dt_add_memory_arch+0x54/0x5c
> [    0.000000] *
> ...
> This patch is trying to fix the above output messed up by memblock_add(), so we can get below debug mesg looks
> more formally after applied:
> [    0.000000] efi:   0x0000e1050000-0x0000e105ffff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
> [    0.000000] efi:   0x0000e1300000-0x0000e1300fff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
> [    0.000000] efi:   0x0000e8200000-0x0000e827ffff [Memory Mapped I/O  |RUN|  |  |  |  |  |  |   |  |  |  |UC]
> [    0.000000] efi:   0x008000000000-0x008001e7ffff [Runtime Data       |RUN|  |  |  |  |  |  |   |WB|WT|WC|UC]*
> [    0.000000] memblock_add: [0x00008000000000-0x00008001e7ffff] flags 0x0 early_init_dt_add_memory_arch+0x54/0x5c
> ...
> 
> Signed-off-by: Dennis Chen <dennis.chen@arm.com>
> Acked-by: Mark Rutland <mark.rutland@arm.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Steve Capper <steve.capper@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> ---
>  drivers/firmware/efi/arm-init.c | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/firmware/efi/arm-init.c b/drivers/firmware/efi/arm-init.c
> index a850cbc..272f674 100644
> --- a/drivers/firmware/efi/arm-init.c
> +++ b/drivers/firmware/efi/arm-init.c
> @@ -174,6 +174,7 @@ static __init void reserve_regions(void)
>  {
>         efi_memory_desc_t *md;
>         u64 paddr, npages, size;
> +       int resv;
> 
>         if (efi_enabled(EFI_DBG))
>                 pr_info("Processing EFI memory map:\n");
> @@ -190,12 +191,16 @@ static __init void reserve_regions(void)
>                 paddr = md->phys_addr;
>                 npages = md->num_pages;
> 
> +               resv = is_reserve_region(md);
>                 if (efi_enabled(EFI_DBG)) {
>                         char buf[64];
> 
>                         pr_info("  0x%012llx-0x%012llx %s%s",
>                                 paddr, paddr + (npages << EFI_PAGE_SHIFT) - 1,
> -                               efi_md_typeattr_format(buf, sizeof(buf), md));
> +                               efi_md_typeattr_format(buf, sizeof(buf), md),
> +                               resv ? "*" : "");
> +
> +                       pr_cont("\n");

As I mentioned in my (off-list) mail previously, please fold this
pr_cont in. You just need to move the "\n" into the end of the format
string for the pr_info.

Thanks,
Mark,