From mboxrd@z Thu Jan 1 00:00:00 1970 From: dennis.chen@arm.com (Dennis Chen) Date: Wed, 25 May 2016 20:40:27 +0800 Subject: [PATCH] arm64:efi fix the format of debug message from efi In-Reply-To: <20160525112549.GJ1337@leverpostej> References: <1464174974-4733-1-git-send-email-dennis.chen@arm.com> <20160525112549.GJ1337@leverpostej> Message-ID: <20160525124024.GA4798@arm.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, May 25, 2016 at 12:25:49PM +0100, Mark Rutland wrote: > On Wed, May 25, 2016 at 07:16:14PM +0800, Dennis Chen wrote: > > When enable debug of efi and memblock with 'efi=debug memblock=debug' appended > > to the kernel command line, the debug message output for earyly_con looks like: > > [ 0.000000] efi: 0x0000e1050000-0x0000e105ffff [Memory Mapped I/O |RUN| | | | | | | | | | |UC] > > [ 0.000000] efi: 0x0000e1300000-0x0000e1300fff [Memory Mapped I/O |RUN| | | | | | | | | | |UC] > > [ 0.000000] efi: 0x0000e8200000-0x0000e827ffff [Memory Mapped I/O |RUN| | | | | | | | | | |UC] > > [ 0.000000] efi: 0x008000000000-0x008001e7ffff [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] > > [ 0.000000] memblock_add: [0x00008000000000-0x00008001e7ffff] flags 0x0 early_init_dt_add_memory_arch+0x54/0x5c > > [ 0.000000] * > > ... > > This patch is trying to fix the above output messed up by memblock_add(), so we can get below debug mesg looks > > more formally after applied: > > [ 0.000000] efi: 0x0000e1050000-0x0000e105ffff [Memory Mapped I/O |RUN| | | | | | | | | | |UC] > > [ 0.000000] efi: 0x0000e1300000-0x0000e1300fff [Memory Mapped I/O |RUN| | | | | | | | | | |UC] > > [ 0.000000] efi: 0x0000e8200000-0x0000e827ffff [Memory Mapped I/O |RUN| | | | | | | | | | |UC] > > [ 0.000000] efi: 0x008000000000-0x008001e7ffff [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC]* > > [ 0.000000] memblock_add: [0x00008000000000-0x00008001e7ffff] flags 0x0 early_init_dt_add_memory_arch+0x54/0x5c > > ... > > > > Signed-off-by: Dennis Chen > > Acked-by: Mark Rutland > > Cc: Catalin Marinas > > Cc: Steve Capper > > Cc: Will Deacon > > --- > > drivers/firmware/efi/arm-init.c | 14 +++++++------- > > 1 file changed, 7 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/firmware/efi/arm-init.c b/drivers/firmware/efi/arm-init.c > > index a850cbc..272f674 100644 > > --- a/drivers/firmware/efi/arm-init.c > > +++ b/drivers/firmware/efi/arm-init.c > > @@ -174,6 +174,7 @@ static __init void reserve_regions(void) > > { > > efi_memory_desc_t *md; > > u64 paddr, npages, size; > > + int resv; > > > > if (efi_enabled(EFI_DBG)) > > pr_info("Processing EFI memory map:\n"); > > @@ -190,12 +191,16 @@ static __init void reserve_regions(void) > > paddr = md->phys_addr; > > npages = md->num_pages; > > > > + resv = is_reserve_region(md); > > if (efi_enabled(EFI_DBG)) { > > char buf[64]; > > > > pr_info(" 0x%012llx-0x%012llx %s%s", > > paddr, paddr + (npages << EFI_PAGE_SHIFT) - 1, > > - efi_md_typeattr_format(buf, sizeof(buf), md)); > > + efi_md_typeattr_format(buf, sizeof(buf), md), > > + resv ? "*" : ""); > > + > > + pr_cont("\n"); > > As I mentioned in my (off-list) mail previously, please fold this > pr_cont in. You just need to move the "\n" into the end of the format > string for the pr_info. > Yes, my careless mistake. Will be updated in v2...;-) Regards, Dennis > > Thanks, > Mark, > IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.