[PATCH v5 00/22] ARM: dts: exynos: Add initial support for Odroid XU

[PATCH v5 00/22] ARM: dts: exynos: Add initial support for Odroid XU

[Krzysztof Kozlowski]

Hi,

Patchset adds necessary clocks, reorganizes existing stuff and finally
adds Odroid XU support.


Changes since v4
================
1. Patch 20: Remove the nodes in exynos5420.dtsi (before they were
   actually just copied instead of moving).

Changes since v3
================
1. Get rid of 5 patches changing the fin_pll after talk with Tomasz
   Figa. The existing definition of oscillator in exynos5410.dtsi
   is preferred over solution chosen for Exynos5420.
   This simplifies also the merging strategy.
2. Add tags from Javier (tested and reviewed).

Patchset is available at my private repo @github:
https://github.com/krzk/linux.git for-next/odroid-xu-v4
(I have some more changes coming but I think it is easier for
reviewers if the patchset does not grow infinitely)


Changes since v2
================
1. Got global-ack from Stephen for the clock changes. I think merging
   everything through arm-soc might be the easiest but:
   a. In such case I will prepare a tag with clock changes,
   b. Anyway I will wait for response from Sylwester and Tomasz.
2. Applied comments from Javier and added his Reviewed-by.
3. Patch 22: added ack from Rob.
4. Minor improvements in existing patches.
5. Five new patches at the end: 23-27 (not reviewed yet).
   Some of them could be squashed with existing ones but existing
   changes got reviews. Although the final Odroid XU DTS works fine but
   in general this is still work-in-progress so I suspect it will grow.
   I am releasing it early following Linux concept. :)


Changes since v1
================
1. A lot of new patches.
2. Removed some TODO notes (eMMC 4.5 so no RCLK pin).
3. New clocks, more reorganization.
4. New common DTSI: exynos54xx.dtsi. I know, it is getting more
   and more complicated but this might help removing duplications
   and keeping everything under control.



Merging strategy
================
The clock changes can go to clock tree. ARM changes to samsung-soc tree.
Please provide me a tag with include/dt-bindings/clock commits so I can
merge it.


Best regards,
Krzysztof


Krzysztof Kozlowski (22):
  dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
  dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410
  clk: samsung: exynos5410: Add serial3, USB and PWM clocks
  ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl
    nodes
  ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels
  ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card
  ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI
  ARM: dts: exynos: Move common nodes to exynos5.dtsi
  ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in
    exynos5410.dtsi
  ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow
  ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc
  ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi
  ARM: dts: exynos: Enable UART3 on Exynos5410
  ARM: dts: exynos: MCT is not an interrupt controller and extend length
    of iomap
  ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI
  ARM: dts: exynos: Add USB to Exynos5410
  ARM: dts: exynos: Add initial support for Odroid XU board
  dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410
  clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks
  ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi
  ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410
  ARM: dts: exynos: Add RTC and I2C to Exynos5410

 .../bindings/arm/samsung/samsung-boards.txt        |    1 +
 arch/arm/boot/dts/Makefile                         |    1 +
 arch/arm/boot/dts/exynos5.dtsi                     |  215 ++-
 arch/arm/boot/dts/exynos5250-snow-common.dtsi      |    2 +-
 arch/arm/boot/dts/exynos5250.dtsi                  | 1701 +++++++++--------
 arch/arm/boot/dts/exynos5410-odroidxu.dts          |  121 ++
 arch/arm/boot/dts/exynos5410-pinctrl.dtsi          |  210 +++
 arch/arm/boot/dts/exynos5410-smdk5410.dts          |    6 +-
 arch/arm/boot/dts/exynos5410.dtsi                  |  267 +--
 arch/arm/boot/dts/exynos5420-pinctrl.dtsi          |   12 +-
 arch/arm/boot/dts/exynos5420.dtsi                  | 1939 +++++++++-----------
 arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts    |   35 +-
 arch/arm/boot/dts/exynos5422-odroidxu3.dts         |   35 +-
 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi    |   50 +
 arch/arm/boot/dts/exynos54xx.dtsi                  |  188 ++
 drivers/clk/samsung/clk-exynos5410.c               |   45 +
 include/dt-bindings/clock/exynos5410.h             |   73 +-
 17 files changed, 2681 insertions(+), 2220 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos5410-odroidxu.dts
 create mode 100644 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
 create mode 100644 arch/arm/boot/dts/exynos54xx.dtsi

-- 
2.7.4

[PATCH v5 01/22] dt-bindings: clock: Add license and reformat Exynos5410 clock IDs

[Krzysztof Kozlowski]

Add license and copyrights (file introduced in 2014) to header with
Exynos5410 clock IDs. Additionally reformat it to improve readability.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 include/dt-bindings/clock/exynos5410.h | 54 ++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 22 deletions(-)

diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h
index 9b180f032e2d..213f19e02870 100644
--- a/include/dt-bindings/clock/exynos5410.h
+++ b/include/dt-bindings/clock/exynos5410.h
@@ -1,33 +1,43 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for Exynos5421 clock controller.
+*/
+
 #ifndef _DT_BINDINGS_CLOCK_EXYNOS_5410_H
 #define _DT_BINDINGS_CLOCK_EXYNOS_5410_H
 
 /* core clocks */
-#define CLK_FIN_PLL 1
-#define CLK_FOUT_APLL 2
-#define CLK_FOUT_CPLL 3
-#define CLK_FOUT_MPLL 4
-#define CLK_FOUT_BPLL 5
-#define CLK_FOUT_KPLL 6
+#define CLK_FIN_PLL		1
+#define CLK_FOUT_APLL		2
+#define CLK_FOUT_CPLL		3
+#define CLK_FOUT_MPLL		4
+#define CLK_FOUT_BPLL		5
+#define CLK_FOUT_KPLL		6
 
 /* gate for special clocks (sclk) */
-#define CLK_SCLK_UART0 128
-#define CLK_SCLK_UART1 129
-#define CLK_SCLK_UART2 130
-#define CLK_SCLK_UART3 131
-#define CLK_SCLK_MMC0 132
-#define CLK_SCLK_MMC1 133
-#define CLK_SCLK_MMC2 134
+#define CLK_SCLK_UART0		128
+#define CLK_SCLK_UART1		129
+#define CLK_SCLK_UART2		130
+#define CLK_SCLK_UART3		131
+#define CLK_SCLK_MMC0		132
+#define CLK_SCLK_MMC1		133
+#define CLK_SCLK_MMC2		134
 
 /* gate clocks */
-#define CLK_UART0 257
-#define CLK_UART1 258
-#define CLK_UART2 259
-#define CLK_UART3 260
-#define CLK_MCT 315
-#define CLK_MMC0 351
-#define CLK_MMC1 352
-#define CLK_MMC2 353
+#define CLK_UART0		257
+#define CLK_UART1		258
+#define CLK_UART2		259
+#define CLK_UART3		260
+#define CLK_MCT			315
+#define CLK_MMC0		351
+#define CLK_MMC1		352
+#define CLK_MMC2		353
 
-#define CLK_NR_CLKS 512
+#define CLK_NR_CLKS		512
 
 #endif /* _DT_BINDINGS_CLOCK_EXYNOS_5410_H */
-- 
2.7.4

[PATCH v5 02/22] dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410

[Krzysztof Kozlowski]

Add IDs for PWM and USB clocks to Exynos5410. Use the same number as for
Exynos5420 just in case in future these drivers were merged.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 include/dt-bindings/clock/exynos5410.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h
index 213f19e02870..34c8e96987a1 100644
--- a/include/dt-bindings/clock/exynos5410.h
+++ b/include/dt-bindings/clock/exynos5410.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2016 Krzysztof Kozlowski
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -27,16 +28,25 @@
 #define CLK_SCLK_MMC0		132
 #define CLK_SCLK_MMC1		133
 #define CLK_SCLK_MMC2		134
+#define CLK_SCLK_USBD300	150
+#define CLK_SCLK_USBD301	151
+#define CLK_SCLK_USBPHY300	152
+#define CLK_SCLK_USBPHY301	153
+#define CLK_SCLK_PWM		155
 
 /* gate clocks */
 #define CLK_UART0		257
 #define CLK_UART1		258
 #define CLK_UART2		259
 #define CLK_UART3		260
+#define CLK_PWM			279
 #define CLK_MCT			315
 #define CLK_MMC0		351
 #define CLK_MMC1		352
 #define CLK_MMC2		353
+#define CLK_USBH20		365
+#define CLK_USBD300		366
+#define CLK_USBD301		367
 
 #define CLK_NR_CLKS		512
 
-- 
2.7.4

[PATCH v5 03/22] clk: samsung: exynos5410: Add serial3, USB and PWM clocks

[Krzysztof Kozlowski]

Just like other Exynos5 family SoCs, this one has four UARTs. Add
missing UART3 clocks to the Exynos5410 clock driver.

Add clocks for USB and PWM.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 drivers/clk/samsung/clk-exynos5410.c | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynos5410.c b/drivers/clk/samsung/clk-exynos5410.c
index d5d5dcabc4a9..5f892128849a 100644
--- a/drivers/clk/samsung/clk-exynos5410.c
+++ b/drivers/clk/samsung/clk-exynos5410.c
@@ -33,9 +33,11 @@
 #define SRC_CPERI1		0x4204
 #define DIV_TOP0		0x10510
 #define DIV_TOP1		0x10514
+#define DIV_FSYS0		0x10548
 #define DIV_FSYS1		0x1054c
 #define DIV_FSYS2		0x10550
 #define DIV_PERIC0		0x10558
+#define DIV_PERIC3		0x10564
 #define SRC_TOP0		0x10210
 #define SRC_TOP1		0x10214
 #define SRC_TOP2		0x10218
@@ -44,6 +46,8 @@
 #define SRC_MASK_FSYS		0x10340
 #define SRC_MASK_PERIC0		0x10350
 #define GATE_BUS_FSYS0		0x10740
+#define GATE_TOP_SCLK_FSYS	0x10840
+#define GATE_TOP_SCLK_PERIC	0x10850
 #define GATE_IP_FSYS		0x10944
 #define GATE_IP_PERIC		0x10950
 #define GATE_IP_PERIS		0x10960
@@ -71,6 +75,7 @@ PNAME(mout_kfc_p)	= { "mout_kpll", "sclk_mpll", };
 PNAME(mpll_user_p)	= { "fin_pll", "sclk_mpll", };
 PNAME(bpll_user_p)	= { "fin_pll", "sclk_bpll", };
 PNAME(mpll_bpll_p)	= { "sclk_mpll_muxed", "sclk_bpll_muxed", };
+PNAME(sclk_mpll_bpll_p)	= { "sclk_mpll_bpll", "fin_pll", };
 
 PNAME(group2_p)		= { "fin_pll", "fin_pll", "none", "none",
 			"none", "none", "sclk_mpll_bpll",
@@ -96,10 +101,14 @@ static struct samsung_mux_clock exynos5410_mux_clks[] __initdata = {
 	MUX(0, "mout_mmc0", group2_p, SRC_FSYS, 0, 4),
 	MUX(0, "mout_mmc1", group2_p, SRC_FSYS, 4, 4),
 	MUX(0, "mout_mmc2", group2_p, SRC_FSYS, 8, 4),
+	MUX(0, "mout_usbd300", sclk_mpll_bpll_p, SRC_FSYS, 28, 1),
+	MUX(0, "mout_usbd301", sclk_mpll_bpll_p, SRC_FSYS, 29, 1),
 
 	MUX(0, "mout_uart0", group2_p, SRC_PERIC0, 0, 4),
 	MUX(0, "mout_uart1", group2_p, SRC_PERIC0, 4, 4),
 	MUX(0, "mout_uart2", group2_p, SRC_PERIC0, 8, 4),
+	MUX(0, "mout_uart3", group2_p, SRC_PERIC0, 12, 4),
+	MUX(0, "mout_pwm", group2_p, SRC_PERIC0, 24, 4),
 
 	MUX(0, "mout_aclk200", mpll_bpll_p, SRC_TOP0, 12, 1),
 	MUX(0, "mout_aclk400", mpll_bpll_p, SRC_TOP0, 20, 1),
@@ -121,6 +130,11 @@ static struct samsung_div_clock exynos5410_div_clks[] __initdata = {
 	DIV(0, "aclk66_pre", "sclk_mpll_muxed", DIV_TOP1, 24, 3),
 	DIV(0, "aclk66", "aclk66_pre", DIV_TOP0, 0, 3),
 
+	DIV(0, "dout_usbphy300", "mout_usbd300", DIV_FSYS0, 16, 4),
+	DIV(0, "dout_usbphy301", "mout_usbd301", DIV_FSYS0, 20, 4),
+	DIV(0, "dout_usbd300", "mout_usbd300", DIV_FSYS0, 24, 4),
+	DIV(0, "dout_usbd301", "mout_usbd301", DIV_FSYS0, 28, 4),
+
 	DIV(0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
 	DIV(0, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
 	DIV(0, "div_mmc2", "mout_mmc2", DIV_FSYS2, 0, 4),
@@ -137,6 +151,8 @@ static struct samsung_div_clock exynos5410_div_clks[] __initdata = {
 	DIV(0, "div_uart2", "mout_uart2", DIV_PERIC0, 8, 4),
 	DIV(0, "div_uart3", "mout_uart3", DIV_PERIC0, 12, 4),
 
+	DIV(0, "dout_pwm", "mout_pwm", DIV_PERIC3, 0, 4),
+
 	DIV(0, "aclk200", "mout_aclk200", DIV_TOP0, 12, 3),
 	DIV(0, "aclk400", "mout_aclk400", DIV_TOP0, 24, 3),
 };
@@ -155,9 +171,23 @@ static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
 	GATE(CLK_MMC1, "sdmmc1", "aclk200", GATE_BUS_FSYS0, 13, 0, 0),
 	GATE(CLK_MMC2, "sdmmc2", "aclk200", GATE_BUS_FSYS0, 14, 0, 0),
 
+	GATE(CLK_SCLK_USBPHY301, "sclk_usbphy301", "dout_usbphy301",
+	     GATE_TOP_SCLK_FSYS, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_USBPHY300, "sclk_usbphy300", "dout_usbphy300",
+	     GATE_TOP_SCLK_FSYS, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_USBD300, "sclk_usbd300", "dout_usbd300",
+	     GATE_TOP_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_USBD301, "sclk_usbd301", "dout_usbd301",
+	     GATE_TOP_SCLK_FSYS, 10, CLK_SET_RATE_PARENT, 0),
+
+	GATE(CLK_SCLK_PWM, "sclk_pwm", "dout_pwm",
+	     GATE_TOP_SCLK_PERIC, 11, CLK_SET_RATE_PARENT, 0),
+
 	GATE(CLK_UART0, "uart0", "aclk66", GATE_IP_PERIC, 0, 0, 0),
 	GATE(CLK_UART1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0),
 	GATE(CLK_UART2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0),
+	GATE(CLK_UART3, "uart3", "aclk66", GATE_IP_PERIC, 3, 0, 0),
+	GATE(CLK_PWM, "pwm", "aclk66", GATE_IP_PERIC, 24, 0, 0),
 
 	GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
 			SRC_MASK_PERIC0, 0, CLK_SET_RATE_PARENT, 0),
@@ -165,6 +195,12 @@ static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
 			SRC_MASK_PERIC0, 4, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
 			SRC_MASK_PERIC0, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_UART3, "sclk_uart3", "div_uart3",
+			SRC_MASK_PERIC0, 12, CLK_SET_RATE_PARENT, 0),
+
+	GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0),
+	GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0),
+	GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0),
 };
 
 static struct samsung_pll_clock exynos5410_plls[nr_plls] __initdata = {
-- 
2.7.4

[PATCH v5 04/22] ARM: dts: exynos: Re-order alphabetically Exynos5420 SD0/SD1 pinctrl nodes

[Krzysztof Kozlowski]

The 'sd0_rclk' was put in the middle of SD1 nodes. Remove the confusion.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index 130563b2ca95..14beb7e07323 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -193,17 +193,17 @@
 		samsung,pin-drv = <3>;
 	};
 
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpc1-0";
+	sd0_rclk: sd0-rclk {
+		samsung,pins = "gpc0-7";
 		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <1>;
 		samsung,pin-drv = <3>;
 	};
 
-	sd0_rclk: sd0-rclk {
-		samsung,pins = "gpc0-7";
+	sd1_clk: sd1-clk {
+		samsung,pins = "gpc1-0";
 		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
+		samsung,pin-pud = <0>;
 		samsung,pin-drv = <3>;
 	};
 
-- 
2.7.4

[PATCH v5 05/22] ARM: dts: exynos: Use lowercase for Exynos5410 CPU node labels

[Krzysztof Kozlowski]

For consistency lowercase node labels are used.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5410.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 477c6741c6dd..ef60a06211f1 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -35,28 +35,28 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu at 0 {
+		cpu0: cpu at 0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU1: cpu at 1 {
+		cpu1: cpu at 1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU2: cpu at 2 {
+		cpu2: cpu at 2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x2>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU3: cpu at 3 {
+		cpu3: cpu at 3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x3>;
-- 
2.7.4

[PATCH v5 06/22] ARM: dts: exynos: Configure Exynos5410 pinctrl for eMMC and SD card

[Krzysztof Kozlowski]

Configure the pinctrl for MMC0 (eMMC) and MMC2 (microSD card).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

Important changes since v2:
1. Re-order the eMMC pins by pin-name, not by label.
---
 arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 77 +++++++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index f9aa6bb55464..ddacafa1e907 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -277,6 +277,83 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
+	sd0_clk: sd0-clk {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cmd: sd0-cmd {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_cd: sd0-cd {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus1: sd0-bus-width1 {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus4: sd0-bus-width4 {
+		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_clk: sd2-clk {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cmd: sd2-cmd {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_cd: sd2-cd {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus1: sd2-bus-width1 {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd2_bus4: sd2-bus-width4 {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
+
+	sd0_bus8: sd0-bus-width8 {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <3>;
+	};
 };
 
 &pinctrl_1 {
-- 
2.7.4

[PATCH v5 07/22] ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI

[Krzysztof Kozlowski]

The LED nodes can be shared between Odroid XU3, XU3-Lite and XU (not yet
added) thus removing duplication.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 35 +----------------
 arch/arm/boot/dts/exynos5422-odroidxu3.dts      | 35 +----------------
 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi | 50 +++++++++++++++++++++++++
 3 files changed, 52 insertions(+), 68 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index 2ae1cf41dcb6..03fa88c45426 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -14,44 +14,11 @@
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
 #include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3 Lite";
 	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
 };
 
 &pwm {
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 432406db85de..9ed6564acfb0 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -13,44 +13,11 @@
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
 #include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3";
 	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
-
-	pwmleds {
-		compatible = "pwm-leds";
-
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
-		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
-		};
-	};
 };
 
 &i2c_0 {
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
new file mode 100644
index 000000000000..0ed30206625c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Hardkernel Odroid XU/XU3 LED device tree source
+ *
+ * Copyright (c) 2015,2016 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	pwmleds {
+		compatible = "pwm-leds";
+
+		greenled {
+			label = "green:mmc0";
+			pwms = <&pwm 1 2000000 0>;
+			pwm-names = "pwm1";
+			/*
+			 * Green LED is much brighter than the others
+			 * so limit its max brightness
+			 */
+			max_brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max_brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpioleds {
+		compatible = "gpio-leds";
+		redled {
+			label = "red:microSD";
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
+};
-- 
2.7.4

[PATCH v5 08/22] ARM: dts: exynos: Move common nodes to exynos5.dtsi

[Krzysztof Kozlowski]

Exynos5420 and Exynos5250 share some nodes: the PWM, syscon
(sysreg_system_controller) and first four I2C controllers. Move them to
parent DTSI to avoid duplication.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

Important changes since v2:
1. Move also i2c[0123] to exynos5.dtsi.
---
 arch/arm/boot/dts/exynos5.dtsi    |  56 ++++++++++++++++++++
 arch/arm/boot/dts/exynos5250.dtsi | 108 ++++++++++++--------------------------
 arch/arm/boot/dts/exynos5420.dtsi | 108 ++++++++++++--------------------------
 3 files changed, 124 insertions(+), 148 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index d5c0f18a4223..c5d198c70b86 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -20,6 +20,10 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
 		serial0 = &serial_0;
 		serial1 = &serial_1;
 		serial2 = &serial_2;
@@ -63,6 +67,11 @@
 		interrupts = <1 9 0xf04>;
 	};
 
+	sysreg_system_controller: syscon at 10050000 {
+		compatible = "samsung,exynos5-sysreg", "syscon";
+		reg = <0x10050000 0x5000>;
+	};
+
 	serial_0: serial at 12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
@@ -87,6 +96,53 @@
 		interrupts = <0 54 0>;
 	};
 
+	i2c_0: i2c at 12C60000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C60000 0x100>;
+		interrupts = <0 56 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		status = "disabled";
+	};
+
+	i2c_1: i2c at 12C70000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C70000 0x100>;
+		interrupts = <0 57 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		status = "disabled";
+	};
+
+	i2c_2: i2c at 12C80000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C80000 0x100>;
+		interrupts = <0 58 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		status = "disabled";
+	};
+
+	i2c_3: i2c at 12C90000 {
+		compatible = "samsung,s3c2440-i2c";
+		reg = <0x12C90000 0x100>;
+		interrupts = <0 59 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		samsung,sysreg-phandle = <&sysreg_system_controller>;
+		status = "disabled";
+	};
+
+	pwm: pwm at 12DD0000 {
+		compatible = "samsung,exynos4210-pwm";
+		reg = <0x12DD0000 0x100>;
+		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+		#pwm-cells = <3>;
+	};
+
 	rtc: rtc at 101E0000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x101E0000 0x100>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index c7158b2fb213..ae4970d1c74f 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -37,10 +37,6 @@
 		mshc1 = &mmc_1;
 		mshc2 = &mmc_2;
 		mshc3 = &mmc_3;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
 		i2c4 = &i2c_4;
 		i2c5 = &i2c_5;
 		i2c6 = &i2c_6;
@@ -235,11 +231,6 @@
 		interrupt-parent = <&gic>;
 	};
 
-	sysreg_system_controller: syscon at 10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
-
 	watchdog at 101D0000 {
 		compatible = "samsung,exynos5250-wdt";
 		reg = <0x101D0000 0x100>;
@@ -328,62 +319,7 @@
 		status = "disabled";
 	};
 
-	i2c_0: i2c at 12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
-	i2c_1: i2c at 12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
-	i2c_2: i2c at 12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
-	i2c_3: i2c at 12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
+	/* i2c_0-3 are defined in exynos5.dtsi */
 	i2c_4: i2c at 12CA0000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12CA0000 0x100>;
@@ -662,15 +598,6 @@
 		samsung,pmureg-phandle = <&pmu_system_controller>;
 	};
 
-	pwm: pwm at 12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
-
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -1070,6 +997,39 @@
 	iommus = <&sysmmu_fimd1>;
 };
 
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>;
 	clock-names = "rtc";
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 549ebf23fee0..f2e8e6482888 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -30,10 +30,6 @@
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
 		pinctrl4 = &pinctrl_4;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
 		i2c4 = &hsi2c_4;
 		i2c5 = &hsi2c_5;
 		i2c6 = &hsi2c_6;
@@ -542,15 +538,6 @@
 		status = "disabled";
 	};
 
-	pwm: pwm at 12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
-
 	dp_phy: dp-video-phy {
 		compatible = "samsung,exynos5420-dp-video-phy";
 		samsung,pmu-syscon = <&pmu_system_controller>;
@@ -588,62 +575,7 @@
 		status = "disabled";
 	};
 
-	i2c_0: i2c at 12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
-	i2c_1: i2c at 12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
-	i2c_2: i2c at 12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
-	i2c_3: i2c at 12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
-
+	/* i2c_0-3 are defined in exynos5.dtsi */
 	hsi2c_4: i2c at 12CA0000 {
 		compatible = "samsung,exynos5250-hsi2c";
 		reg = <0x12CA0000 0x1000>;
@@ -823,11 +755,6 @@
 		interrupt-parent = <&gic>;
 	};
 
-	sysreg_system_controller: syscon at 10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
-
 	tmu_cpu0: tmu at 10060000 {
 		compatible = "samsung,exynos5420-tmu";
 		reg = <0x10060000 0x100>;
@@ -1207,6 +1134,39 @@
 	iommu-names = "m0", "m1";
 };
 
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>;
 	clock-names = "rtc";
-- 
2.7.4

[PATCH v5 09/22] ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi

[Krzysztof Kozlowski]

Add 'sromc' label to SROM memory controller in common exynos5.dtsi so it
can be referenced by inheriting DTSI.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index c5d198c70b86..30a0b63b06c9 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -35,7 +35,7 @@
 		reg = <0x10000000 0x100>;
 	};
 
-	memory-controller at 12250000 {
+	sromc: memory-controller at 12250000 {
 		compatible = "samsung,exynos4210-srom";
 		reg = <0x12250000 0x14>;
 	};
-- 
2.7.4

[PATCH v5 10/22] ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow

[Krzysztof Kozlowski]

The i2c-arbitrator node in exynos5250-snow-common used absolute path to
reference other node (the i2c parent). Use phandle instead, because the
depth of the other node may be changed (like moving it under 'soc'
node).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5250-snow-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index ddfe1f558c10..419d59da1751 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -61,7 +61,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		i2c-parent = <&{/i2c@12CA0000}>;
+		i2c-parent = <&i2c_4>;
 
 		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
 		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
-- 
2.7.4

[PATCH v5 12/22] ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi

[Krzysztof Kozlowski]

The exynos5.dtsi is used for common nodes shared between Exynos5250 and
Exynos542x. Since Exynos5410 is very similar to Exynos5420 it can
include the common file as well to remove duplication and make
everything more consistent.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5410-smdk5410.dts |   6 +-
 arch/arm/boot/dts/exynos5410.dtsi         | 103 ++++++++++--------------------
 2 files changed, 35 insertions(+), 74 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index 0f6429e1b75c..777fcf2edd79 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -102,14 +102,14 @@
 	};
 };
 
-&uart0 {
+&serial_0 {
 	status = "okay";
 };
 
-&uart1 {
+&serial_1 {
 	status = "okay";
 };
 
-&uart2 {
+&serial_2 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index ef60a06211f1..0d555c5b7311 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -14,6 +14,7 @@
  */
 
 #include "skeleton.dtsi"
+#include "exynos5.dtsi"
 #include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos5410.h>
 
@@ -26,9 +27,6 @@
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
 	};
 
 	cpus {
@@ -70,49 +68,6 @@
 		#size-cells = <1>;
 		ranges;
 
-		combiner: interrupt-controller at 10440000 {
-			compatible = "samsung,exynos4210-combiner";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			samsung,combiner-nr = <32>;
-			reg = <0x10440000 0x1000>;
-			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-		};
-
-		gic: interrupt-controller at 10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg =	<0x10481000 0x1000>,
-				<0x10482000 0x1000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		chipid at 10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		sromc: memory-controller at 12250000 {
-			compatible = "samsung,exynos4210-srom";
-			reg = <0x12250000 0x14>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			ranges = <0 0 0x04000000 0x20000
-				  1 0 0x05000000 0x20000
-				  2 0 0x06000000 0x20000
-				  3 0 0x07000000 0x20000>;
-		};
-
 		pmu_system_controller: system-controller at 10040000 {
 			compatible = "samsung,exynos5410-pmu", "syscon";
 			reg = <0x10040000 0x5000>;
@@ -239,34 +194,40 @@
 			reg = <0x03860000 0x1000>;
 			interrupts = <0 47 0>;
 		};
+	};
+};
 
-		uart0: serial at 12C00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <0 51 0>;
-			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
 
-		uart1: serial at 12C10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <0 52 0>;
-			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
+&serial_0 {
+	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+	clock-names = "uart", "clk_uart_baud0";
+};
 
-		uart2: serial at 12C20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <0 53 0>;
-			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-	};
+&serial_1 {
+	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+	status = "disabled";
+};
+
+&sromc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x04000000 0x20000
+		  1 0 0x05000000 0x20000
+		  2 0 0x06000000 0x20000
+		  3 0 0x07000000 0x20000>;
 };
 
 #include "exynos5410-pinctrl.dtsi"
-- 
2.7.4

[PATCH v5 13/22] ARM: dts: exynos: Enable UART3 on Exynos5410

[Krzysztof Kozlowski]

Just like other Exynos5 family SoCs, this one has four UARTs. Configure
clocks for UART3 and enable it.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5410.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 0d555c5b7311..a81a03408a0a 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -218,7 +218,8 @@
 };
 
 &serial_3 {
-	status = "disabled";
+	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+	clock-names = "uart", "clk_uart_baud0";
 };
 
 &sromc {
-- 
2.7.4

[PATCH v5 14/22] ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap

[Krzysztof Kozlowski]

Multi-Core Timer generates interrupts but it is not really an interrupt
controller so remove the "interrupt-controller" and "interrupt-cells"
properties. Additionally extend the length of mapped memory to cover all
registers (last SFR is at 0x0A40).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5420.dtsi | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 4b16a9376a24..872dadf0f2d4 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -263,9 +263,7 @@
 
 		mct: mct at 101C0000 {
 			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0x800>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
+			reg = <0x101C0000 0xB00>;
 			interrupt-parent = <&mct_map>;
 			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
 					<8>, <9>, <10>, <11>;
-- 
2.7.4

[PATCH v5 15/22] ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI

[Krzysztof Kozlowski]

The Exynos5410/542x/5800 are very similar designs. Create a new
DTSI with common nodes to remove DTS duplication. Although currently
only MCT and SysRAM are shared but in future more nodes will be added to
the common file.

The patch should not have functional impact.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5410.dtsi | 55 ++++---------------------------
 arch/arm/boot/dts/exynos5420.dtsi | 54 ++++---------------------------
 arch/arm/boot/dts/exynos54xx.dtsi | 68 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 80 insertions(+), 97 deletions(-)
 create mode 100644 arch/arm/boot/dts/exynos54xx.dtsi

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index a81a03408a0a..1354b5bbc14e 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -13,8 +13,7 @@
  * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
-#include "exynos5.dtsi"
+#include "exynos54xx.dtsi"
 #include "exynos-syscon-restart.dtsi"
 #include <dt-bindings/clock/exynos5410.h>
 
@@ -76,53 +75,6 @@
 			#clock-cells = <1>;
 		};
 
-		mct: mct at 101C0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0xB00>;
-			interrupt-parent = <&interrupt_map>;
-			interrupts = <0>, <1>, <2>, <3>,
-				<4>, <5>, <6>, <7>,
-				<8>, <9>, <10>, <11>;
-			clocks = <&fin_pll>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-
-			interrupt_map: interrupt-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &combiner 23 3>,
-						<1 &combiner 23 4>,
-						<2 &combiner 25 2>,
-						<3 &combiner 25 3>,
-						<4 &gic 0 120 0>,
-						<5 &gic 0 121 0>,
-						<6 &gic 0 122 0>,
-						<7 &gic 0 123 0>,
-						<8 &gic 0 128 0>,
-						<9 &gic 0 129 0>,
-						<10 &gic 0 130 0>,
-						<11 &gic 0 131 0>;
-			};
-		};
-
-		sysram at 02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x54000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x54000>;
-
-			smp-sysram at 0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram at 53000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x53000 0x1000>;
-			};
-		};
-
 		clock: clock-controller at 10010000 {
 			compatible = "samsung,exynos5410-clock";
 			reg = <0x10010000 0x30000>;
@@ -197,6 +149,11 @@
 	};
 };
 
+&mct {
+	clocks = <&fin_pll>, <&clock CLK_MCT>;
+	clock-names = "fin_pll", "mct";
+};
+
 &pwm {
 	clocks = <&clock CLK_PWM>;
 	clock-names = "timers";
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 872dadf0f2d4..ebf2ed3c5ff8 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -13,9 +13,8 @@
  * published by the Free Software Foundation.
  */
 
+#include "exynos54xx.dtsi"
 #include <dt-bindings/clock/exynos5420.h>
-#include "exynos5.dtsi"
-
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
 / {
@@ -181,24 +180,6 @@
 			};
 		};
 
-		sysram at 02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x54000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x54000>;
-
-			smp-sysram at 0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram at 53000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x53000 0x1000>;
-			};
-		};
-
 		clock: clock-controller at 10010000 {
 			compatible = "samsung,exynos5420-clock";
 			reg = <0x10010000 0x30000>;
@@ -261,34 +242,6 @@
 			status = "disabled";
 		};
 
-		mct: mct at 101C0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0xB00>;
-			interrupt-parent = <&mct_map>;
-			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
-					<8>, <9>, <10>, <11>;
-			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-
-			mct_map: mct-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &combiner 23 3>,
-						<1 &combiner 23 4>,
-						<2 &combiner 25 2>,
-						<3 &combiner 25 3>,
-						<4 &gic 0 120 0>,
-						<5 &gic 0 121 0>,
-						<6 &gic 0 122 0>,
-						<7 &gic 0 123 0>,
-						<8 &gic 0 128 0>,
-						<9 &gic 0 129 0>,
-						<10 &gic 0 130 0>,
-						<11 &gic 0 131 0>;
-			};
-		};
-
 		gsc_pd: power-domain at 10044000 {
 			compatible = "samsung,exynos4210-pd";
 			reg = <0x10044000 0x20>;
@@ -1163,6 +1116,11 @@
 	pinctrl-0 = <&i2c3_bus>;
 };
 
+&mct {
+	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+	clock-names = "fin_pll", "mct";
+};
+
 &pwm {
 	clocks = <&clock CLK_PWM>;
 	clock-names = "timers";
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
new file mode 100644
index 000000000000..1bcfb7f455c1
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -0,0 +1,68 @@
+/*
+ * Samsung's Exynos54xx SoC series common device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific
+ * Exynos 54xx SoCs should include this file and customize it further
+ * (e.g. with clocks).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include "exynos5.dtsi"
+
+/ {
+	compatible = "samsung,exynos5";
+
+	soc: soc {
+		sysram at 02020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x54000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x54000>;
+
+			smp-sysram at 0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sysram at 53000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x53000 0x1000>;
+			};
+		};
+
+		mct: mct at 101c0000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x101c0000 0xb00>;
+			interrupt-parent = <&mct_map>;
+			interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
+					<8>, <9>, <10>, <11>;
+
+			mct_map: mct-map {
+				#interrupt-cells = <1>;
+				#address-cells = <0>;
+				#size-cells = <0>;
+				interrupt-map = <0 &combiner 23 3>,
+						<1 &combiner 23 4>,
+						<2 &combiner 25 2>,
+						<3 &combiner 25 3>,
+						<4 &gic 0 120 0>,
+						<5 &gic 0 121 0>,
+						<6 &gic 0 122 0>,
+						<7 &gic 0 123 0>,
+						<8 &gic 0 128 0>,
+						<9 &gic 0 129 0>,
+						<10 &gic 0 130 0>,
+						<11 &gic 0 131 0>;
+			};
+		};
+	};
+};
-- 
2.7.4

[PATCH v5 16/22] ARM: dts: exynos: Add USB to Exynos5410

[Krzysztof Kozlowski]

Move USB 3.0 DWC and 2.0 EHCI/OHCI nodes from exynos5420.dtsi to
exynos54xx.dtsi common for entire family. For Exynos542x/5800 this
should not have functional impact but for Exynos5410 this effectively
adds USB support.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5410.dtsi |  39 +++++++++++
 arch/arm/boot/dts/exynos5420.dtsi | 133 +++++++++++---------------------------
 arch/arm/boot/dts/exynos54xx.dtsi |  79 ++++++++++++++++++++++
 3 files changed, 157 insertions(+), 94 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 1354b5bbc14e..6146bf164248 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -188,4 +188,43 @@
 		  3 0 0x07000000 0x20000>;
 };
 
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
 #include "exynos5410-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index ebf2ed3c5ff8..8fa65eb8027d 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -41,8 +41,6 @@
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		spi2 = &spi_2;
-		usbdrdphy0 = &usbdrd_phy0;
-		usbdrdphy1 = &usbdrd_phy1;
 	};
 
 	/*
@@ -770,98 +768,6 @@
 			clock-names = "secss";
 		};
 
-		usbdrd3_0: usb3-0 {
-			compatible = "samsung,exynos5250-dwusb3";
-			clocks = <&clock CLK_USBD300>;
-			clock-names = "usbdrd30";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbdrd_dwc3_0: dwc3 at 12000000 {
-				compatible = "snps,dwc3";
-				reg = <0x12000000 0x10000>;
-				interrupts = <0 72 0>;
-				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usbdrd_phy0: phy at 12100000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12100000 0x100>;
-			clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-			clock-names = "phy", "ref";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		usbdrd3_1: usb3-1 {
-			compatible = "samsung,exynos5250-dwusb3";
-			clocks = <&clock CLK_USBD301>;
-			clock-names = "usbdrd30";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usbdrd_dwc3_1: dwc3 at 12400000 {
-				compatible = "snps,dwc3";
-				reg = <0x12400000 0x10000>;
-				interrupts = <0 73 0>;
-				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
-				phy-names = "usb2-phy", "usb3-phy";
-			};
-		};
-
-		usbdrd_phy1: phy at 12500000 {
-			compatible = "samsung,exynos5420-usbdrd-phy";
-			reg = <0x12500000 0x100>;
-			clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-			clock-names = "phy", "ref";
-			samsung,pmu-syscon = <&pmu_system_controller>;
-			#phy-cells = <1>;
-		};
-
-		usbhost2: usb at 12110000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0x12110000 0x100>;
-			interrupts = <0 71 0>;
-
-			clocks = <&clock CLK_USBH20>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port at 0 {
-				reg = <0>;
-				phys = <&usb2_phy 1>;
-			};
-		};
-
-		usbhost1: usb at 12120000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0x12120000 0x100>;
-			interrupts = <0 71 0>;
-
-			clocks = <&clock CLK_USBH20>;
-			clock-names = "usbhost";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port at 0 {
-				reg = <0>;
-				phys = <&usb2_phy 1>;
-			};
-		};
-
-		usb2_phy: phy at 12130000 {
-			compatible = "samsung,exynos5250-usb2-phy";
-			reg = <0x12130000 0x100>;
-			clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-			clock-names = "phy", "ref";
-			#phy-cells = <1>;
-			samsung,sysreg-phandle = <&sysreg_system_controller>;
-			samsung,pmureg-phandle = <&pmu_system_controller>;
-		};
-
 		sysmmu_g2dr: sysmmu at 0x10A60000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x10A60000 0x1000>;
@@ -1153,4 +1059,43 @@
 	clock-names = "uart", "clk_uart_baud0";
 };
 
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
 #include "exynos5420-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 1bcfb7f455c1..e01d068d4c38 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -20,6 +20,11 @@
 / {
 	compatible = "samsung,exynos5";
 
+	aliases {
+		usbdrdphy0 = &usbdrd_phy0;
+		usbdrdphy1 = &usbdrd_phy1;
+	};
+
 	soc: soc {
 		sysram at 02020000 {
 			compatible = "mmio-sram";
@@ -64,5 +69,79 @@
 						<11 &gic 0 131 0>;
 			};
 		};
+
+		usbdrd3_0: usb3-0 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_0: dwc3 at 12000000 {
+				compatible = "snps,dwc3";
+				reg = <0x12000000 0x10000>;
+				interrupts = <0 72 0>;
+				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd_phy0: phy at 12100000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbdrd3_1: usb3-1 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbdrd_dwc3_1: dwc3 at 12400000 {
+				compatible = "snps,dwc3";
+				reg = <0x12400000 0x10000>;
+				interrupts = <0 73 0>;
+				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
+
+		usbdrd_phy1: phy at 12500000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12500000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbhost2: usb at 12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <0 71 0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port at 0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
+		};
+
+		usbhost1: usb at 12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <0 71 0>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port at 0 {
+				reg = <0>;
+				phys = <&usb2_phy 1>;
+			};
+		};
+
+		usb2_phy: phy at 12130000 {
+			compatible = "samsung,exynos5250-usb2-phy";
+			reg = <0x12130000 0x100>;
+			#phy-cells = <1>;
+		};
 	};
 };
-- 
2.7.4

[PATCH v5 17/22] ARM: dts: exynos: Add initial support for Odroid XU board

[Krzysztof Kozlowski]

The Hardkernel's Odroid XU board was first design with big.LITTLE SoC
from Samsung: the Exynos5410. Details:
1. Exynos5410 octa-core (A15+A7, however as of now only one cluster is
   enabled),
2. 2 GB DDR3 RAM,
3. PowerVR SGX544MP3 GPU (not enabled in DTS),
4. USB 3.0 Host x 1, USB 3.0 OTG x 1, USB 2.0 Host x 4,
5. HDMI 1.4a, MIPI DSI and Display Port (Display Port not on all of
   revisions though),
6. eMMC 4.5 and microSD slots.

Comparing this board to Odroid XU3 (more popular), the differences are:
1. Exynos5410 instead of 5422,
2. MIPI DSI LCD connector,
3. Main PMIC: Maxim 77802 instead of S2MPS11,
4. USB3503+LAN9730 instead of integrated LAN9514,
5. eMMC 4.5 instead of eMMC 5.0,

This patch adds initial support for the XU board with working basic
functions, eMMC/SD and USB (including attached ethernet adapter).

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Link: http://www.hardkernel.com/main/products/prdt_info.php?g_code=G137510300620
---
 .../bindings/arm/samsung/samsung-boards.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/exynos5410-odroidxu.dts          | 121 +++++++++++++++++++++
 3 files changed, 123 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos5410-odroidxu.dts

diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index f5deace2b380..0ea7f14ef294 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -47,6 +47,7 @@ Required root node properties:
 	- "hardkernel,odroid-u3"  - for Exynos4412-based Hardkernel Odroid U3.
 	- "hardkernel,odroid-x"   - for Exynos4412-based Hardkernel Odroid X.
 	- "hardkernel,odroid-x2"  - for Exynos4412-based Hardkernel Odroid X2.
+	- "hardkernel,odroid-xu"  - for Exynos5410-based Hardkernel Odroid XU.
 	- "hardkernel,odroid-xu3" - for Exynos5422-based Hardkernel Odroid XU3.
 	- "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel
 					 Odroid XU3 Lite board.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5aeb10674370..9ed1c7abedb1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -134,6 +134,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
 	exynos5250-snow-rev5.dtb \
 	exynos5250-spring.dtb \
 	exynos5260-xyref5260.dtb \
+	exynos5410-odroidxu.dtb \
 	exynos5410-smdk5410.dtb \
 	exynos5420-arndale-octa.dtb \
 	exynos5420-peach-pit.dtb \
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
new file mode 100644
index 000000000000..9fe04500ecaf
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -0,0 +1,121 @@
+/*
+ * Hardkernel Odroid XU board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos54xx-odroidxu-leds.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU";
+	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
+
+	memory {
+		reg = <0x40000000 0x7ea00000>;
+	};
+
+	chosen {
+		linux,stdout-path = &serial_2;
+	};
+
+	emmc_pwrseq: pwrseq {
+		pinctrl-0 = <&emmc_nrst_pin>;
+		pinctrl-names = "default";
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 20972 0>;
+		cooling-min-state = <0>;
+		cooling-max-state = <3>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 130 170 230>;
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	firmware at 02073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+};
+
+&mmc_0 {
+	status = "okay";
+	mmc-pwrseq = <&emmc_pwrseq>;
+	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+	samsung,read-strobe-delay = <90>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+	emmc_nrst_pin: emmc-nrst {
+		samsung,pins = "gpd1-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
-- 
2.7.4

[PATCH v5 18/22] dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410

[Krzysztof Kozlowski]

Add IDs for I2C, USI (HSI2C) and RTC clocks to Exynos5410. Use the same
number as for Exynos5420 just in case in future these drivers were
merged.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 include/dt-bindings/clock/exynos5410.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/dt-bindings/clock/exynos5410.h b/include/dt-bindings/clock/exynos5410.h
index 34c8e96987a1..e94b7bbfd6af 100644
--- a/include/dt-bindings/clock/exynos5410.h
+++ b/include/dt-bindings/clock/exynos5410.h
@@ -38,9 +38,18 @@
 #define CLK_UART0		257
 #define CLK_UART1		258
 #define CLK_UART2		259
+#define CLK_I2C0		261
+#define CLK_I2C1		262
+#define CLK_I2C2		263
+#define CLK_I2C3		264
+#define CLK_USI0		265
+#define CLK_USI1		266
+#define CLK_USI2		267
+#define CLK_USI3		268
 #define CLK_UART3		260
 #define CLK_PWM			279
 #define CLK_MCT			315
+#define CLK_RTC			317
 #define CLK_MMC0		351
 #define CLK_MMC1		352
 #define CLK_MMC2		353
-- 
2.7.4

[PATCH v5 19/22] clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks

[Krzysztof Kozlowski]

Add clocks for I2C, USI (HSI2C) and RTC to the Exynos5410 clock driver.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 drivers/clk/samsung/clk-exynos5410.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynos5410.c b/drivers/clk/samsung/clk-exynos5410.c
index 5f892128849a..6c2e59c576ee 100644
--- a/drivers/clk/samsung/clk-exynos5410.c
+++ b/drivers/clk/samsung/clk-exynos5410.c
@@ -159,6 +159,7 @@ static struct samsung_div_clock exynos5410_div_clks[] __initdata = {
 
 static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
 	GATE(CLK_MCT, "mct", "aclk66", GATE_IP_PERIS, 18, 0, 0),
+	GATE(CLK_RTC, "rtc", "aclk66", GATE_IP_PERIS, 20, 0, 0),
 
 	GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc_pre0",
 			SRC_MASK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
@@ -187,6 +188,14 @@ static struct samsung_gate_clock exynos5410_gate_clks[] __initdata = {
 	GATE(CLK_UART1, "uart1", "aclk66", GATE_IP_PERIC, 1, 0, 0),
 	GATE(CLK_UART2, "uart2", "aclk66", GATE_IP_PERIC, 2, 0, 0),
 	GATE(CLK_UART3, "uart3", "aclk66", GATE_IP_PERIC, 3, 0, 0),
+	GATE(CLK_I2C0, "i2c0", "aclk66", GATE_IP_PERIC, 6, 0, 0),
+	GATE(CLK_I2C1, "i2c1", "aclk66", GATE_IP_PERIC, 7, 0, 0),
+	GATE(CLK_I2C2, "i2c2", "aclk66", GATE_IP_PERIC, 8, 0, 0),
+	GATE(CLK_I2C3, "i2c3", "aclk66", GATE_IP_PERIC, 9, 0, 0),
+	GATE(CLK_USI0, "usi0", "aclk66", GATE_IP_PERIC, 10, 0, 0),
+	GATE(CLK_USI1, "usi1", "aclk66", GATE_IP_PERIC, 11, 0, 0),
+	GATE(CLK_USI2, "usi2", "aclk66", GATE_IP_PERIC, 12, 0, 0),
+	GATE(CLK_USI3, "usi3", "aclk66", GATE_IP_PERIC, 13, 0, 0),
 	GATE(CLK_PWM, "pwm", "aclk66", GATE_IP_PERIC, 24, 0, 0),
 
 	GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
-- 
2.7.4

[PATCH v5 20/22] ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi

[Krzysztof Kozlowski]

The USI/HSI2C nodes can be mostly shared between Exynos5420 and
Exynos5410 so move them to common DTSI.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>

---

Change since v4:
1. Remove the nodes in exynos5420.dtsi (before they were actually just
   copied instead of moving).
2. Use lower-case for hex.
---
 arch/arm/boot/dts/exynos5420.dtsi | 85 +++++++++++++--------------------------
 arch/arm/boot/dts/exynos54xx.dtsi | 41 +++++++++++++++++++
 2 files changed, 69 insertions(+), 57 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 8fa65eb8027d..8b1e706e9250 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -29,10 +29,6 @@
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
 		pinctrl4 = &pinctrl_4;
-		i2c4 = &hsi2c_4;
-		i2c5 = &hsi2c_5;
-		i2c6 = &hsi2c_6;
-		i2c7 = &hsi2c_7;
 		i2c8 = &hsi2c_8;
 		i2c9 = &hsi2c_9;
 		i2c10 = &hsi2c_10;
@@ -526,59 +522,6 @@
 			status = "disabled";
 		};
 
-		/* i2c_0-3 are defined in exynos5.dtsi */
-		hsi2c_4: i2c at 12CA0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12CA0000 0x1000>;
-			interrupts = <0 60 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c4_hs_bus>;
-			clocks = <&clock CLK_USI0>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_5: i2c at 12CB0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12CB0000 0x1000>;
-			interrupts = <0 61 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c5_hs_bus>;
-			clocks = <&clock CLK_USI1>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_6: i2c at 12CC0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12CC0000 0x1000>;
-			interrupts = <0 62 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c6_hs_bus>;
-			clocks = <&clock CLK_USI2>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
-		hsi2c_7: i2c at 12CD0000 {
-			compatible = "samsung,exynos5250-hsi2c";
-			reg = <0x12CD0000 0x1000>;
-			interrupts = <0 63 0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c7_hs_bus>;
-			clocks = <&clock CLK_USI3>;
-			clock-names = "hsi2c";
-			status = "disabled";
-		};
-
 		hsi2c_8: i2c at 12E00000 {
 			compatible = "samsung,exynos5250-hsi2c";
 			reg = <0x12E00000 0x1000>;
@@ -1022,6 +965,34 @@
 	pinctrl-0 = <&i2c3_bus>;
 };
 
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
 &mct {
 	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
 	clock-names = "fin_pll", "mct";
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index e01d068d4c38..44a8391c8524 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -21,6 +21,10 @@
 	compatible = "samsung,exynos5";
 
 	aliases {
+		i2c4 = &hsi2c_4;
+		i2c5 = &hsi2c_5;
+		i2c6 = &hsi2c_6;
+		i2c7 = &hsi2c_7;
 		usbdrdphy0 = &usbdrd_phy0;
 		usbdrdphy1 = &usbdrd_phy1;
 	};
@@ -70,6 +74,43 @@
 			};
 		};
 
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		hsi2c_4: i2c at 12ca0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12ca0000 0x1000>;
+			interrupts = <0 60 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c at 12cb0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cb0000 0x1000>;
+			interrupts = <0 61 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c at 12cc0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cc0000 0x1000>;
+			interrupts = <0 62 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c at 12cd0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cd0000 0x1000>;
+			interrupts = <0 63 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		usbdrd3_0: usb3-0 {
 			compatible = "samsung,exynos5250-dwusb3";
 			#address-cells = <1>;
-- 
2.7.4

[PATCH v5 21/22] ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410

[Krzysztof Kozlowski]

Add pincontrol groups for HSI2C (USI), I2C, PWM and UART to Exynos5410.
This allows configuring these pins to specific functions.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 133 ++++++++++++++++++++++++++++++
 1 file changed, 133 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
index ddacafa1e907..b58a0f29f42c 100644
--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -278,6 +278,139 @@
 		#interrupt-cells = <2>;
 	};
 
+	uart0_data: uart0-data {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart0_fctl: uart0-fctl {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_data: uart1-data {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart1_fctl: uart1-fctl {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c2_bus: i2c2-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_data: uart2-data {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart2_fctl: uart2-fctl {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c3_bus: i2c3-bus {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	uart3_data: uart3-data {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c4_hs_bus: i2c4-hs-bus {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c5_hs_bus: i2c5-hs-bus {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c6_hs_bus: i2c6-hs-bus {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <4>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm0_out: pwm0-out {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm1_out: pwm1-out {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm2_out: pwm2-out {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	pwm3_out: pwm3-out {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c7_hs_bus: i2c7-hs-bus {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c0_bus: i2c0-bus {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
+	i2c1_bus: i2c1-bus {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
+
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpc0-0";
 		samsung,pin-function = <2>;
-- 
2.7.4

[PATCH v5 22/22] ARM: dts: exynos: Add RTC and I2C to Exynos5410

[Krzysztof Kozlowski]

Configure Exynos5410-specific properties of RTC, I2C and HSI2C nodes.
This still does not enable them on the board level though.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
---
 arch/arm/boot/dts/exynos5410.dtsi | 63 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 6146bf164248..a937d9bdad90 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -149,6 +149,62 @@
 	};
 };
 
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
 &mct {
 	clocks = <&fin_pll>, <&clock CLK_MCT>;
 	clock-names = "fin_pll", "mct";
@@ -159,6 +215,13 @@
 	clock-names = "timers";
 };
 
+&rtc {
+	clocks = <&clock CLK_RTC>;
+	clock-names = "rtc";
+	interrupt-parent = <&pmu_system_controller>;
+	status = "disabled";
+};
+
 &serial_0 {
 	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 	clock-names = "uart", "clk_uart_baud0";
-- 
2.7.4

[PATCH v5 00/22] ARM: dts: exynos: Add initial support for Odroid XU

[Sylwester Nawrocki]

On 05/28/2016 11:54 AM, Krzysztof Kozlowski wrote:
>
> The clock changes can go to clock tree. ARM changes to samsung-soc tree.
> Please provide me a tag with include/dt-bindings/clock commits so I can
> merge it.

I applied the clock tree patches and here is the tag for the three
include/dt-bindings patches:

The following changes since commit 1a695a905c18548062509178b98bc91e67510864:

  Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)

are available in the git repository at:

  git://linuxtv.org/snawrocki/samsung.git tags/clk-v4.8-exynos5410-dt

for you to fetch changes up to ed1e1505db0c116affdfab01e650c44a9c459c65:

  dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410
(2016-05-30 16:00:11 +0200)

----------------------------------------------------------------
Adition of missing clock index definitions for exynos5410 SoC
PWM, USB, I2C, and RTC device related clocks.

----------------------------------------------------------------
Krzysztof Kozlowski (3):
      dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
      dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410
      dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410

 include/dt-bindings/clock/exynos5410.h | 73
+++++++++++++++++++++++++++++++++++++++++++++++++++----------------------
 1 file changed, 51 insertions(+), 22 deletions(-)


--
Thanks,
Sylwester

[PATCH v5 00/22] ARM: dts: exynos: Add initial support for Odroid XU

[Krzysztof Kozlowski]

On 05/30/2016 05:27 PM, Sylwester Nawrocki wrote:
> On 05/28/2016 11:54 AM, Krzysztof Kozlowski wrote:
>>
>> The clock changes can go to clock tree. ARM changes to samsung-soc tree.
>> Please provide me a tag with include/dt-bindings/clock commits so I can
>> merge it.
> 
> I applied the clock tree patches and here is the tag for the three
> include/dt-bindings patches:

Thanks mate!
Pulled.

Best regards,
Krzysztof

> 
> The following changes since commit 1a695a905c18548062509178b98bc91e67510864:
> 
>   Linux 4.7-rc1 (2016-05-29 09:29:24 -0700)
> 
> are available in the git repository at:
> 
>   git://linuxtv.org/snawrocki/samsung.git tags/clk-v4.8-exynos5410-dt
> 
> for you to fetch changes up to ed1e1505db0c116affdfab01e650c44a9c459c65:
> 
>   dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410
> (2016-05-30 16:00:11 +0200)
> 
> ----------------------------------------------------------------
> Adition of missing clock index definitions for exynos5410 SoC
> PWM, USB, I2C, and RTC device related clocks.
> 
> ----------------------------------------------------------------
> Krzysztof Kozlowski (3):
>       dt-bindings: clock: Add license and reformat Exynos5410 clock IDs
>       dt-bindings: clock: Add PWM and USB clock IDs to Exynos5410
>       dt-bindings: clock: Add I2C, HSI2C and RTC clock IDs to Exynos5410
> 
>  include/dt-bindings/clock/exynos5410.h | 73
> +++++++++++++++++++++++++++++++++++++++++++++++++++----------------------
>  1 file changed, 51 insertions(+), 22 deletions(-)
> 
> 
> --
> Thanks,
> Sylwester
> 

[PATCH v5 13/22] ARM: dts: exynos: Enable UART3 on Exynos5410

[Kevin Hilman]

Hi Krzysztof,

On Sat, May 28, 2016 at 2:54 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> Just like other Exynos5 family SoCs, this one has four UARTs. Configure
> clocks for UART3 and enable it.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>

This patch landed in linux-next[1] and kernelci.org found a boot
regression on the exynos5410-odroidxu[2], where it looks like it's
faulting in clk_prepare().  Bisecting pointed to this patch.  I added
"status = disabled" back into the DTS on top of next-20160601[3] and
verified my odroid-XU to be booting fine again.

Kevin

[1] 594127ada6df ARM: dts: exynos: Enable UART3 on Exynos5410
[2] https://kernelci.org/boot/exynos5410-odroidxu/job/next/kernel/next-20160601/defconfig/multi_v7_defconfig/lab/lab-baylibre-seattle/?_id=574e97c759b5140f4141c8ef
[3] diff --git a/arch/arm/boot/dts/exynos5410.dtsi
b/arch/arm/boot/dts/exynos5410.dtsi
index a937d9bdad90..f4baf1d1e864 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -238,6 +238,7 @@
 };

 &serial_3 {
+       status = "disabled";
        clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
        clock-names = "uart", "clk_uart_baud0";
 };

[PATCH v5 13/22] ARM: dts: exynos: Enable UART3 on Exynos5410

[Krzysztof Kozlowski]

On Wed, Jun 1, 2016 at 9:57 PM, Kevin Hilman <khilman@kernel.org> wrote:
> Hi Krzysztof,
>
> On Sat, May 28, 2016 at 2:54 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>> Just like other Exynos5 family SoCs, this one has four UARTs. Configure
>> clocks for UART3 and enable it.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
>
> This patch landed in linux-next[1] and kernelci.org found a boot
> regression on the exynos5410-odroidxu[2], where it looks like it's
> faulting in clk_prepare().  Bisecting pointed to this patch.  I added
> "status = disabled" back into the DTS on top of next-20160601[3] and
> verified my odroid-XU to be booting fine again.

Hi,

Thanks for report. Indeed the patch brings up to the light an issue in
serial driver. Fixed here:
https://lkml.org/lkml/2016/5/31/570

I left the commit in my tree as it is correct (strictly speaking).
Sorry for any trouble it makes.

Best regards,
Krzysztof

[PATCH v5 13/22] ARM: dts: exynos: Enable UART3 on Exynos5410

[Javier Martinez Canillas]

Hello Krzysztof,

On 06/01/2016 04:06 PM, Krzysztof Kozlowski wrote:
> On Wed, Jun 1, 2016 at 9:57 PM, Kevin Hilman <khilman@kernel.org> wrote:
>> Hi Krzysztof,
>>
>> On Sat, May 28, 2016 at 2:54 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
>>> Just like other Exynos5 family SoCs, this one has four UARTs. Configure
>>> clocks for UART3 and enable it.
>>>
>>> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>>> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
>>
>> This patch landed in linux-next[1] and kernelci.org found a boot
>> regression on the exynos5410-odroidxu[2], where it looks like it's
>> faulting in clk_prepare().  Bisecting pointed to this patch.  I added
>> "status = disabled" back into the DTS on top of next-20160601[3] and
>> verified my odroid-XU to be booting fine again.
> 
> Hi,
> 
> Thanks for report. Indeed the patch brings up to the light an issue in
> serial driver. Fixed here:
> https://lkml.org/lkml/2016/5/31/570
> 
> I left the commit in my tree as it is correct (strictly speaking).
> Sorry for any trouble it makes.
>

Kevin pointed me to this issue over IRC and I was able to reproduce it in
my Peach Pi by removing the UART3 clocks from the Exynos5420 clock driver.

Your patch indeed fixes the issue, I'll add a Reviewed-by on that thread.
 
> Best regards,
> Krzysztof
> 

Best regards,
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

[PATCH v5 13/22] ARM: dts: exynos: Enable UART3 on Exynos5410

[Javier Martinez Canillas]

On 06/01/2016 04:52 PM, Javier Martinez Canillas wrote:
> Hello Krzysztof,

[snip]

>>
>> I left the commit in my tree as it is correct (strictly speaking).
>> Sorry for any trouble it makes.
>>
> 
> Kevin pointed me to this issue over IRC and I was able to reproduce it in
> my Peach Pi by removing the UART3 clocks from the Exynos5420 clock driver.
> 
> Your patch indeed fixes the issue, I'll add a Reviewed-by on that thread.
> 

err, I meant a Tested-by tag... but yes I've also reviewed the patch :)

Best regards, 
-- 
Javier Martinez Canillas
Open Source Group
Samsung Research America

[PATCH v5 19/22] clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks

[Stephen Boyd]

On 05/28, Krzysztof Kozlowski wrote:
> Add clocks for I2C, USI (HSI2C) and RTC to the Exynos5410 clock driver.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---

Acked-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v5 13/22] ARM: dts: exynos: Enable UART3 on Exynos5410

[Krzysztof Kozlowski]

On 06/01/2016 10:54 PM, Javier Martinez Canillas wrote:
> On 06/01/2016 04:52 PM, Javier Martinez Canillas wrote:
>> Hello Krzysztof,
> 
> [snip]
> 
>>>
>>> I left the commit in my tree as it is correct (strictly speaking).
>>> Sorry for any trouble it makes.
>>>
>>
>> Kevin pointed me to this issue over IRC and I was able to reproduce it in
>> my Peach Pi by removing the UART3 clocks from the Exynos5420 clock driver.
>>
>> Your patch indeed fixes the issue, I'll add a Reviewed-by on that thread.
>>
> 
> err, I meant a Tested-by tag... but yes I've also reviewed the patch :)

Sure, thanks!

Best regards,
Krzysztof