From mboxrd@z Thu Jan 1 00:00:00 1970 From: pavel@ucw.cz (Pavel Machek) Date: Sun, 5 Jun 2016 21:24:19 +0200 Subject: [PATCH v2 1/6] ir-rx51: Fix build after multiarch changes broke it In-Reply-To: <1463427254-7728-2-git-send-email-ivo.g.dimitrov.75@gmail.com> References: <1463427254-7728-1-git-send-email-ivo.g.dimitrov.75@gmail.com> <1463427254-7728-2-git-send-email-ivo.g.dimitrov.75@gmail.com> Message-ID: <20160605192419.GA20086@amd> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon 2016-05-16 22:34:09, Ivaylo Dimitrov wrote: > From: Tony Lindgren > > The ir-rx51 driver for n900 has been disabled since the multiarch > changes as plat include directory no longer is SoC specific. > > Let's fix it with minimal changes to pass the dmtimer calls in > pdata. Then the following changes can be done while things can > be tested to be working for each change: > > 1. Change the non-pwm dmtimer to use just hrtimer if possible > > 2. Change the pwm dmtimer to use Linux PWM API with the new > drivers/pwm/pwm-omap-dmtimer.c and remove the direct calls > to dmtimer functions > > 3. Parse configuration from device tree and drop the pdata > > Note compilation of this depends on the previous patch > "ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51". > > Cc: Mauro Carvalho Chehab > Cc: Neil Armstrong > Cc: linux-media at vger.kernel.org > Signed-off-by: Tony Lindgren Acked-by: Pavel Machek -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html