From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.ripard@free-electrons.com (Maxime Ripard) Date: Tue, 7 Jun 2016 22:44:26 +0200 Subject: [PATCH 3/3] ARM: dts: sun8i-h3: Add dts file for Sinovoip BPI-M2+ In-Reply-To: <1464853811-15233-4-git-send-email-wens@csie.org> References: <1464853811-15233-1-git-send-email-wens@csie.org> <1464853811-15233-4-git-send-email-wens@csie.org> Message-ID: <20160607204426.GB14179@lukather> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Jun 02, 2016 at 03:50:11PM +0800, Chen-Yu Tsai wrote: > The BPI-M2+ is an H3 development board. It is a smaller form factor than > the original BPI-M2, with the new H3 SoC. > > It has 1GB DRAM, 8GB eMMC, a micro SD card slot, HDMI output, 2 USB > host connector and 1 USB OTG connector, an IR receiver, WiFi+BT based > on Ampak AP6212. > > The board also has a 3 pin header for (debug) UART, a 40 pin GPIO header > based on the Raspberry Pi B+, but the peripheral signals are not the > same, and an FPC connector for connecting BPI's camera. > > Signed-off-by: Chen-Yu Tsai I fixed the whitespace error, and applied all three. Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: