linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660
Date: Tue, 14 Jun 2016 11:55:17 -0700	[thread overview]
Message-ID: <20160614185517.GG28218@codeaurora.org> (raw)
In-Reply-To: <1465918259-11138-4-git-send-email-linus.walleij@linaro.org>

On 06/14, Linus Walleij wrote:
> diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
> index a5a38820554a..51d3c9e70617 100644
> --- a/arch/arm/boot/dts/qcom-msm8660.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
> @@ -215,6 +215,95 @@
> +
> +			rpmcc: clock-controller {
> +				compatible	= "qcom,rpmcc-apq8660", "qcom,rpmcc";
> +				#clock-cells = <1>;
> +			};

This driver isn't merged yet, but ok.

> +
> +			pm8901-regulators {

I'd rather have regulators at 8901 and regulators at 8058. That way the
node name is generic per ePAPR suggestions.

> +				compatible = "qcom,rpm-pm8901-regulators";
> +
> +				pm8901_l0: l0 {};
> +				pm8901_l1: l1 {};
> +				pm8901_l2: l2 {};
> +				pm8901_l3: l3 {};
> +				pm8901_l4: l4 {};
> +				pm8901_l5: l5 {};
> +				pm8901_l6: l6 {};
> +
> +				/* S0 and S1 Handled as SAW regulators by SPM */
> +				pm8901_s2: s2 {};
> +				pm8901_s3: s3 {};
> +				pm8901_s4: s4 {};
> +
> +				pm8901_lvs0: lvs0 {};
> +				pm8901_lvs1: lvs1 {};
> +				pm8901_lvs2: lvs2 {};
> +				pm8901_lvs3: lvs3 {};
> +
> +				pm8058_mvs: mvs {};

pm8901_mvs?

> +			};
> +
> +			pm8058-regulators {
> +				compatible = "qcom,rpm-pm8058-regulators";
> +
> +				pm8058_l0: l0 {};
> +				pm8058_l1: l1 {};
> +				pm8058_l2: l2 {};
> +				pm8058_l3: l3 {};
> +				pm8058_l4: l4 {};
> +				pm8058_l5: l5 {};
> +				pm8058_l6: l6 {};
> +				pm8058_l7: l7 {};
> +				pm8058_l8: l8 {};
> +				pm8058_l9: l9 {};
> +				pm8058_l10: l10 {};
> +				pm8058_l11: l11 {};
> +				pm8058_l12: l12 {};
> +				pm8058_l13: l13 {};
> +				pm8058_l14: l14 {};
> +				pm8058_l15: l15 {};
> +				pm8058_l16: l16 {};
> +				pm8058_l17: l17 {};
> +				pm8058_l18: l18 {};
> +				pm8058_l19: l19 {};
> +				pm8058_l20: l20 {};
> +				pm8058_l21: l21 {};
> +				pm8058_l22: l22 {};
> +				pm8058_l23: l23 {};
> +				pm8058_l24: l24 {};
> +				pm8058_l25: l25 {};
> +
> +				pm8058_s0: s0 {};
> +				pm8058_s1: s1 {};

Just leave these out? RPM shouldn't be touching s0 or s1.

> +				pm8058_s2: s2 {};
> +				pm8058_s3: s3 {};
> +				pm8058_s4: s4 {};
> +
> +				pm8058_lvs0: lvs0 {};
> +				pm8058_lvs1: lvs1 {};
> +
> +				pm8058_ncp: ncp {};
> +			};
> +		};
> +

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

  reply	other threads:[~2016-06-14 18:55 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-14 15:30 [PATCH 0/5] APQ8060 Dragonboard support Linus Walleij
2016-06-14 15:30 ` [PATCH 1/5] ARM: dts: add GPIO and MPP to MSM8660 PMIC Linus Walleij
2016-06-14 18:57   ` Stephen Boyd
2016-06-14 15:30 ` [PATCH 2/5] ARM: dts: add SDCC5 to Qualcomm MSM8660 Linus Walleij
2016-06-14 18:57   ` Stephen Boyd
2016-06-14 15:30 ` [PATCH 3/5] ARM: dts: add L2CC and RPM with regulators for MSM8660 Linus Walleij
2016-06-14 18:55   ` Stephen Boyd [this message]
2016-06-14 19:02     ` Bjorn Andersson
2016-06-14 19:48       ` Stephen Boyd
2016-06-14 22:51         ` Russell King - ARM Linux
2016-06-14 22:48     ` Russell King - ARM Linux
2016-06-16  0:17       ` Stephen Boyd
2016-06-16  8:09         ` Russell King - ARM Linux
2016-06-15 13:16     ` Linus Walleij
2016-06-16  0:57       ` Stephen Boyd
2016-06-14 15:30 ` [PATCH 4/5] ARM: dts: move the fixed MMC regulator to SURF board Linus Walleij
2016-06-14 18:55   ` Stephen Boyd
2016-06-14 15:30 ` [PATCH 5/5] ARM: dts: add Qualcomm APQ8060-based Dragonboard Linus Walleij
2016-06-14 19:11   ` Stephen Boyd
2016-06-15 13:37     ` Linus Walleij
2016-06-16  0:11   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160614185517.GG28218@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).