From mboxrd@z Thu Jan 1 00:00:00 1970 From: wsa@the-dreams.de (Wolfram Sang) Date: Fri, 17 Jun 2016 13:56:11 +0200 Subject: [PATCH v10 0/8] add i2c driver supported for rk3399 In-Reply-To: <1463407063-41218-1-git-send-email-david.wu@rock-chips.com> References: <1463407063-41218-1-git-send-email-david.wu@rock-chips.com> Message-ID: <20160617115611.GC6876@tetsubishi> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, May 16, 2016 at 09:57:35PM +0800, David Wu wrote: > There are three points differert from others: > - new method to caculate i2c timings for rk3399 > - pclk and function clk are separated at rk3399 > - add fast-plus mode supported for rk3399 > > David Wu (8): > i2c: rk3x: add documentation to fields in "struct rk3x_i2c" > i2c: rk3x: use struct "rk3x_i2c_calced_timings" > i2c: rk3x: Remove redundant rk3x_i2c_clean_ipd() > i2c: rk3x: Change SoC data to not use array > i2c: rk3x: Move spec timing data to "static const" structs > dt-bindings: i2c: rk3x: add support for rk3399 > i2c: rk3x: add i2c support for rk3399 soc > i2c: rk3x: support fast-mode plus for rk3399 > > Documentation/devicetree/bindings/i2c/i2c-rk3x.txt | 16 +- Applied whole series to for-next, thanks! This was nicely refactored and easy to review, thanks. Also thanks to all reviewers who helped this series. I fixed one checkpatch issue for you, though: WARNING: Statements should start on a tabstop #278: FILE: drivers/i2c/busses/i2c-rk3x.c:789: + if (min_div_for_hold >= min_total_div) { -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: