linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mark.rutland@arm.com (Mark Rutland)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] arm64:acpi Fix the acpi alignment exeception when 'mem=' specified
Date: Thu, 23 Jun 2016 13:42:30 +0100	[thread overview]
Message-ID: <20160623124229.GD8836@leverpostej> (raw)
In-Reply-To: <1466681415-8058-2-git-send-email-dennis.chen@arm.com>

On Thu, Jun 23, 2016 at 07:30:15PM +0800, Dennis Chen wrote:
> This is a rework patch based on [1]. According to the proposal from
> Mark Rutland, when applying the system memory limit through 'mem=x'
> kernel command line, don't remove the rest memory regions above the
> limit from the memblock, instead marking them as MEMBLOCK_NOMAP region,
> which will preserve the ability to identify regions as normal memory
> while not using them for allocation and the linear map.
> 
> Without this patch, the ACPI core will map those acpi data regions(if
> they are above the limit) as device type memory, which will result in
> the alignment exception when ACPI core parses the AML data stream 
> since the parsing will produce some non-alignment accesses.
>
> [1]:http://lists.infradead.org/pipermail/linux-arm-kernel/2016-June/438443.html

Please rewrite the message to be standalone (i.e. so peopel can read
this without having to folow the link).

Explain why using mem= makes ACPI think regions should be mapped as
Device memory, the problems this causes for ACPICA, then cover why we
want to nomap the region.

> Signed-off-by: Dennis Chen <dennis.chen@arm.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Steve Capper <steve.capper@arm.com>
> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
> Cc: Will Deacon <will.deacon@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> Cc: Matt Fleming <matt@codeblueprint.co.uk>
> Cc: linux-mm at kvack.org
> Cc: linux-acpi at vger.kernel.org
> Cc: linux-efi at vger.kernel.org
> ---
>  arch/arm64/mm/init.c | 10 ++++++----
>  1 file changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
> index d45f862..e509e24 100644
> --- a/arch/arm64/mm/init.c
> +++ b/arch/arm64/mm/init.c
> @@ -222,12 +222,14 @@ void __init arm64_memblock_init(void)
>  
>  	/*
>  	 * Apply the memory limit if it was set. Since the kernel may be loaded
> -	 * high up in memory, add back the kernel region that must be accessible
> -	 * via the linear mapping.
> +	 * in the memory regions above the limit, so we need to clear the
> +	 * MEMBLOCK_NOMAP flag of this region to make it can be accessible via
> +	 * the linear mapping.
>  	 */
>  	if (memory_limit != (phys_addr_t)ULLONG_MAX) {
> -		memblock_enforce_memory_limit(memory_limit);
> -		memblock_add(__pa(_text), (u64)(_end - _text));
> +		memblock_mem_limit_mark_nomap(memory_limit);
> +		if (!memblock_is_map_memory(__pa(_text)))
> +			memblock_clear_nomap(__pa(_text), (u64)(_end - _text));

I think that the memblock_is_map_memory() check should go. Just because
a page of the kernel image is mapped doesn't mean that the rest is. That
will make this a 1-1 change.

Other than that, this looks right to me.

Thanks,
Mark.

>  	}
>  
>  	if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && initrd_start) {
> -- 
> 1.8.3.1
> 

  reply	other threads:[~2016-06-23 12:42 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-23 11:30 [PATCH 1/2] mm: memblock Add some new functions to address the mem limit issue Dennis Chen
2016-06-23 11:30 ` [PATCH 2/2] arm64:acpi Fix the acpi alignment exeception when 'mem=' specified Dennis Chen
2016-06-23 12:42   ` Mark Rutland [this message]
2016-06-24  2:31     ` Dennis Chen
2016-06-23 12:57 ` [PATCH 1/2] mm: memblock Add some new functions to address the mem limit issue Mark Rutland
2016-06-24  2:28   ` Dennis Chen
2016-06-23 15:26 ` kbuild test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160623124229.GD8836@leverpostej \
    --to=mark.rutland@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).