From mboxrd@z Thu Jan 1 00:00:00 1970 From: megous@megous.com (megous at megous.com) Date: Thu, 23 Jun 2016 21:20:54 +0200 Subject: [PATCH 04/14] dt-bindings: document sun8i_ths In-Reply-To: <20160623192104.18720-1-megous@megous.com> References: <20160623192104.18720-1-megous@megous.com> Message-ID: <20160623192104.18720-5-megous@megous.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Ondrej Jirman This patch adds the binding documentation for the sun8i_ths driver Signed-off-by: Ond?ej Jirman --- .../devicetree/bindings/thermal/sun8i-ths.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-ths.txt diff --git a/Documentation/devicetree/bindings/thermal/sun8i-ths.txt b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt new file mode 100644 index 0000000..826cd57 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/sun8i-ths.txt @@ -0,0 +1,31 @@ +* sun8i THS + +Required properties: +- compatible : "allwinner,sun8i-h3-ths" +- reg : Address range of the thermal registers and location of the calibration + value +- resets : Must contain an entry for each entry in reset-names. + see ../reset/reset.txt for details +- reset-names : Must include the name "ahb" +- clocks : Must contain an entry for each entry in clock-names. +- clock-names : Must contain "ahb" for the bus gate and "ths" for the THS + clock + +Optional properties: +- nvmem-cells : Must contain an entry for each entry in nvmem-cell-names +- nvmem-cell-names : Must contain "calibration" for the cell containing the + temperature calibration cell, if available + +Example: +ths: ths at 01c25000 { + #thermal-sensor-cells = <0>; + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x400>; + interrupts = ; + resets = <&bus_rst 136>; + reset-names = "ahb"; + clocks = <&bus_gates 72>, <&ths_clk>; + clock-names = "ahb", "ths"; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; +}; -- 2.9.0