From mboxrd@z Thu Jan 1 00:00:00 1970 From: stephen.boyd@linaro.org (Stephen Boyd) Date: Sun, 26 Jun 2016 00:28:24 -0700 Subject: [PATCH 07/21] usb: chipidea: Notify of reset when switching into host mode In-Reply-To: <20160626072838.28082-1-stephen.boyd@linaro.org> References: <20160626072838.28082-1-stephen.boyd@linaro.org> Message-ID: <20160626072838.28082-8-stephen.boyd@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The chipidea/udc.c file sends a CI_HDRC_CONTROLLER_RESET_EVENT to the wrapper drivers when it calls hw_device_reset(), but that function is not called from chipidea/host.c. The intent of this event is to allow the wrapper driver to do any wrapper specific things after the reset bit has been set in the usb command register. Therefore, add this event hook in the host role after we toggle that bit. Cc: Peter Chen Cc: Greg Kroah-Hartman Signed-off-by: Stephen Boyd --- drivers/usb/chipidea/host.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 523c155daea8..3344d3256a60 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -87,6 +87,9 @@ static int ehci_ci_reset(struct usb_hcd *hcd) if (ret) return ret; + if (ci->platdata->notify_event) + ci->platdata->notify_event(ci, CI_HDRC_CONTROLLER_RESET_EVENT); + return ci_platform_configure(ci); } -- 2.9.0.rc2.8.ga28705d