From: grygorii.strashko@ti.com (Grygorii Strashko)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: keystone: specify usb mode explicitly
Date: Tue, 28 Jun 2016 12:42:45 +0300 [thread overview]
Message-ID: <20160628094245.9521-1-grygorii.strashko@ti.com> (raw)
The USB OTG mode is not supported by Kestone 2 devices, as result, the
USB devices enumeration and detection will not work properly when
kernel is built with CONFIG_USB_DWC3_DUAL_ROLE=y (default for multi
platform build):
- it's required to load gadget drivers manually to make host mode
work and this confuses current Keystone 2 users
- device mode is not working, because port can't detect and switch to
peripheral/host mode dynamically.
Hence, specify usb mode explicitly in DT: usb0 = "host" for all KS2
devices and usb1 = "peripheral" for K2E.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
arch/arm/boot/dts/keystone-k2e-evm.dts | 12 ++++++++++--
arch/arm/boot/dts/keystone-k2e.dtsi | 4 ++--
arch/arm/boot/dts/keystone-k2hk-evm.dts | 6 +++++-
arch/arm/boot/dts/keystone-k2l-evm.dts | 6 +++++-
arch/arm/boot/dts/keystone.dtsi | 4 ++--
5 files changed, 24 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
index 4c32ebc..ae1ebe7 100644
--- a/arch/arm/boot/dts/keystone-k2e-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
@@ -47,18 +47,26 @@
status = "okay";
};
-&usb {
+&keystone_usb0 {
status = "okay";
};
+&usb0 {
+ dr_mode = "host";
+};
+
&usb1_phy {
status = "okay";
};
-&usb1 {
+&keystone_usb1 {
status = "okay";
};
+&usb1 {
+ dr_mode = "peripheral";
+};
+
&i2c0 {
dtt at 50 {
compatible = "at,24c1024";
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 96b349f..3540a1d 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -61,7 +61,7 @@
status = "disabled";
};
- usb1: usb at 25000000 {
+ keystone_usb1: usb at 25000000 {
compatible = "ti,keystone-dwc3";
#address-cells = <1>;
#size-cells = <1>;
@@ -74,7 +74,7 @@
dma-ranges;
status = "disabled";
- dwc3 at 25010000 {
+ usb1: dwc3 at 25010000 {
compatible = "synopsys,dwc3";
reg = <0x25010000 0x70000>;
interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
index b38b344..2156ff9 100644
--- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
@@ -83,10 +83,14 @@
status = "okay";
};
-&usb {
+&keystone_usb0 {
status = "okay";
};
+&usb0 {
+ dr_mode = "host";
+};
+
&aemif {
cs0 {
#address-cells = <2>;
diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
index 7f9c2e9..056b42f 100644
--- a/arch/arm/boot/dts/keystone-k2l-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
@@ -32,10 +32,14 @@
status = "okay";
};
-&usb {
+&keystone_usb0 {
status = "okay";
};
+&usb0 {
+ dr_mode = "host";
+};
+
&i2c0 {
dtt at 50 {
compatible = "at,24c1024";
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index e34b226..96c9943 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -188,7 +188,7 @@
status = "disabled";
};
- usb: usb at 2680000 {
+ keystone_usb0: usb at 2680000 {
compatible = "ti,keystone-dwc3";
#address-cells = <1>;
#size-cells = <1>;
@@ -201,7 +201,7 @@
dma-ranges;
status = "disabled";
- dwc3 at 2690000 {
+ usb0: dwc3 at 2690000 {
compatible = "synopsys,dwc3";
reg = <0x2690000 0x70000>;
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
--
2.9.0
next reply other threads:[~2016-06-28 9:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-28 9:42 Grygorii Strashko [this message]
2016-07-18 17:45 ` [PATCH] ARM: dts: keystone: specify usb mode explicitly Grygorii Strashko
2016-07-18 17:49 ` Santosh Shilimkar
2016-08-25 14:11 ` Grygorii Strashko
2016-08-25 16:31 ` Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160628094245.9521-1-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox