* [GIT PULL] Allwinner DT patches for 4.8
@ 2016-07-05 20:12 Maxime Ripard
2016-07-07 12:52 ` Arnd Bergmann
0 siblings, 1 reply; 2+ messages in thread
From: Maxime Ripard @ 2016-07-05 20:12 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Please pull the following DT changes for the next merge window.
Since it was conflicting on some files with the sunxi-fixes-for-4.7
tag I sent earlier, this branch is based on that tag.
Thanks,
Maxime
The following changes since commit eee25ab19de632af1ab4d2ac50bfc5006802e664:
ARM: dts: sun7i: Fix pll3x2 and pll7x2 not having a parent clock (2016-06-29 09:03:13 +0200)
are available in the git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git tags/sunxi-dt-for-4.8
for you to fetch changes up to d509e205d81f074a9b8d93ac80ab56405dede48b:
ARM: dts: sun5i: Enable otg on the auxtex t004 (2016-07-05 08:54:33 +0200)
----------------------------------------------------------------
Allwinner DT changes for 4.8
The usual amount of DT patches, among which:
- I2S support
- Support for the AXP809 in the relevant boards (A80 based)
- New boards: Banapi M1+, Banapi M2+, Allwinner Parrot (R16 EVB),
- The other patches to enable various controllers on our boards, most
notably USB OTG
----------------------------------------------------------------
Aleksei Mamlin (2):
ARM: dts: sun4i: Re-order pinctrl nodes alphabetically
ARM: dts: sun7i: Re-order pinctrl nodes alphabetically
Boris Brezillon (2):
ARM: dts: sun4i: Add NFC node to Allwinner A10 SoC
ARM: dts: sun7i: Add NFC node to Allwinner A20 SoC
Chen-Yu Tsai (15):
ARM: dts: axp209: Disable ldo5 by default
ARM: dts: sun5i: q8-common: Enable USB power supply
ARM: dts: sun5i: q8-common: Enable audio codec
ARM: dts: sun5i: q8-common: Enable display pipeline and LCD display
ARM: dts: sunxi: Add dtsi file for AXP809 PMIC
ARM: dts: sun9i: a80-optimus: Add AXP809 PMIC device node and regulators
ARM: dts: sun9i: cubieboard4: Add AXP809 PMIC device node and regulators
ARM: dts: sun8i-h3: move uart0 pins to sort pinmux list in proper order
ARM: dts: sun8i-h3: Add uart1 pinmux setting
ARM: dts: sun8i-h3: Add dts file for Sinovoip BPI-M2+
ARM: dts: sun9i: a80-optimus: Drop sunxi-common-regulators.dtsi
ARM: dts: sun9i: cubieboard4: Drop sunxi-common-regulators.dtsi
ARM: dts: sun9i: cubieboard4: Order nodes by alphabetical order
ARM: dts: sun9i: a80-optimus: Order nodes by alphabetical order
ARM: dts: sun5i: q8-common: Enable USB-based WiFi
Emilio L?pez (1):
ARM: sun7i: Add mod1 clock nodes
Florian Fainelli (1):
ARM: dts: sun7i: Add BCM53125 switch nodes to the lamobo-r1 board
Hans de Goede (20):
ARM: dts: sun5i-a10s-wobo-i5: Enable ldo4 too
ARM: dts: sunxi: Add a startup delay for fixed regulator enabled phys
ARM: dts: sun4i: HDMI and the tv-encoder use tcon ch1 not ch0
ARM: dts: sun7i: HDMI and the tv-encoder use tcon ch1 not ch0
ARM: dts: axp22x.dtsi: Disable axp22x ldo_io# regulators by default
ARM: dts: axp22x.dtsi: Add usb_power_supply node
ARM: dts: axp22x.dtsi: Add reg_drivebus node
ARM: dts: sun8i-a?3-q8-tablet.dts: Add full otg support
ARM: dts: sun8i-a23-polaroid-mid2809pxe04: Add full otg support
ARM: dts: sun8i-a23-polaroid-mid2809pxe04: Disable ehci0
ARM: dts: sun4i: The blue led on the Mele A1000 is a power led
ARM: dts: sun6i: The blue led on the Mele A1000G quad is a power led
ARM: dts: sun6i: The blue led on the Mele M9 is a power led
ARM: dts: sun6i: Add pmic / regulator nodes to Mele A1000G quad dts
ARM: dts: sun6i: Add pmic / regulator nodes to Mele M9 dts
ARM: dts: sun8i-q8-common: Add support for USB wifi controllers
ARM: dts: sun5i: Enable otg on the mk802
ARM: dts: sun5i: Add axp152 pmic node to mk802
ARM: dts: sun5i: Add mmc1 / sdio-wifi node to mk802
ARM: dts: sun5i: Enable otg on the auxtex t004
Luo Yi (1):
ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board
Maxime Ripard (4):
ARM: sun5i: a13: Add LCD pins
ARM: sun5i: Move display blocks to A13
ARM: sun7i: Add DAI nodes
ARM: sun5i: Allow PLL3 2x fixed factor clock to change PLL3 rate
Michal Suchanek (2):
ARM: dts: sun5i: a10s: add spi2 pins
ARM: dts: sun5i: add spi2 on A10s Olinuxino Micro
Priit Laes (2):
ARM: sun4i: A10: Add display and TCON clocks
ARM: sun7i: A20: Add display and TCON clocks
Quentin Schulz (1):
ARM: sun8i: Add Parrot Board DTS
arch/arm/boot/dts/Makefile | 5 +-
arch/arm/boot/dts/axp209.dtsi | 1 +
arch/arm/boot/dts/axp22x.dtsi | 12 +
arch/arm/boot/dts/axp809.dtsi | 53 +++
arch/arm/boot/dts/sun4i-a10-a1000.dts | 4 +-
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 1 +
arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 1 +
arch/arm/boot/dts/sun4i-a10.dtsi | 227 +++++++---
arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts | 19 +
arch/arm/boot/dts/sun5i-a10s-mk802.dts | 32 ++
arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 7 +
arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 10 +-
arch/arm/boot/dts/sun5i-a10s.dtsi | 14 +
arch/arm/boot/dts/sun5i-a13-q8-tablet.dts | 10 -
arch/arm/boot/dts/sun5i-a13.dtsi | 122 ++++++
arch/arm/boot/dts/sun5i-q8-common.dtsi | 62 +++
arch/arm/boot/dts/sun5i-r8.dtsi | 120 +-----
arch/arm/boot/dts/sun5i.dtsi | 2 +-
arch/arm/boot/dts/sun6i-a31-m9.dts | 96 ++++-
arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts | 96 ++++-
arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 230 ++++++++++
arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 60 ++-
arch/arm/boot/dts/sun7i-a20.dtsi | 474 ++++++++++++++-------
.../boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts | 34 +-
arch/arm/boot/dts/sun8i-a23-q8-tablet.dts | 15 -
arch/arm/boot/dts/sun8i-a33-q8-tablet.dts | 15 -
.../arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts | 195 +++++++++
arch/arm/boot/dts/sun8i-h3.dtsi | 21 +-
arch/arm/boot/dts/sun8i-q8-common.dtsi | 42 ++
arch/arm/boot/dts/sun8i-r16-parrot.dts | 351 +++++++++++++++
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 164 ++++++-
arch/arm/boot/dts/sun9i-a80-optimus.dts | 195 +++++++--
32 files changed, 2235 insertions(+), 455 deletions(-)
create mode 100644 arch/arm/boot/dts/axp809.dtsi
create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
create mode 100644 arch/arm/boot/dts/sun8i-h3-sinovoip-bpi-m2-plus.dts
create mode 100644 arch/arm/boot/dts/sun8i-r16-parrot.dts
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160705/f186e6df/attachment.sig>
^ permalink raw reply [flat|nested] 2+ messages in thread
* [GIT PULL] Allwinner DT patches for 4.8
2016-07-05 20:12 [GIT PULL] Allwinner DT patches for 4.8 Maxime Ripard
@ 2016-07-07 12:52 ` Arnd Bergmann
0 siblings, 0 replies; 2+ messages in thread
From: Arnd Bergmann @ 2016-07-07 12:52 UTC (permalink / raw)
To: linux-arm-kernel
On Tuesday, July 5, 2016 10:12:39 PM CEST Maxime Ripard wrote:
> Allwinner DT changes for 4.8
>
> The usual amount of DT patches, among which:
> - I2S support
> - Support for the AXP809 in the relevant boards (A80 based)
> - New boards: Banapi M1+, Banapi M2+, Allwinner Parrot (R16 EVB),
> - The other patches to enable various controllers on our boards, most
> notably USB OTG
>
>
Pulled into next/dt, thanks!
Arnd
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-07-07 12:52 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-07-05 20:12 [GIT PULL] Allwinner DT patches for 4.8 Maxime Ripard
2016-07-07 12:52 ` Arnd Bergmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).