[PATCH v2 0/6] Add Amlogic secure monitor and NVMEM drivers

[PATCH v2 0/6] Add Amlogic secure monitor and NVMEM drivers

[Carlo Caione]

From: Carlo Caione <carlo@endlessm.com>

I decided to respin again the secure monitor driver this time with the NVMEM
driver in the same patchset to have a clear view on how a generic driver can
use the monitor.

The latest patchset for the secure monitor with the Changelog is here [1].

[1] http://www.spinics.net/lists/arm-kernel/msg510441.html

Changelog:
v2:
  - nvmem driver not using regmap anymore
  - headers list cleanup
  - disable sm driver for !4K kernels
  - removed meson_sm_get_fw()
  - better debug printing
  - general cleanup  


Carlo Caione (6):
  firmware: Amlogic: Add secure monitor driver
  documentation: Add secure monitor bindings documentation
  ARM64: dts: amlogic: gxbb: Enable secure monitor
  nvmem: amlogic: Add Amlogic Meson EFUSE driver
  documentation: Add nvmem bindings documentation
  ARM64: dts: amlogic: gxbb: Enable NVMEM

 .../bindings/firmware/meson/meson_sm.txt           |  15 ++
 .../devicetree/bindings/nvmem/amlogic-efuse.txt    |  39 ++++
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |  24 ++
 drivers/firmware/Kconfig                           |   1 +
 drivers/firmware/Makefile                          |   1 +
 drivers/firmware/meson/Kconfig                     |   9 +
 drivers/firmware/meson/Makefile                    |   1 +
 drivers/firmware/meson/meson_sm.c                  | 247 +++++++++++++++++++++
 drivers/nvmem/Kconfig                              |  10 +
 drivers/nvmem/Makefile                             |   2 +
 drivers/nvmem/meson-efuse.c                        |  93 ++++++++
 include/linux/firmware/meson/meson_sm.h            |  31 +++
 12 files changed, 473 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
 create mode 100644 Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
 create mode 100644 drivers/firmware/meson/Kconfig
 create mode 100644 drivers/firmware/meson/Makefile
 create mode 100644 drivers/firmware/meson/meson_sm.c
 create mode 100644 drivers/nvmem/meson-efuse.c
 create mode 100644 include/linux/firmware/meson/meson_sm.h

-- 
2.7.4

[PATCH v2 1/6] firmware: Amlogic: Add secure monitor driver

[Carlo Caione]

From: Carlo Caione <carlo@endlessm.com>

Introduce a driver to provide calls into secure monitor mode.

In the Amlogic SoCs these calls are used for multiple reasons: access to
NVMEM, set USB boot, enable JTAG, etc...

Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
 drivers/firmware/Kconfig                |   1 +
 drivers/firmware/Makefile               |   1 +
 drivers/firmware/meson/Kconfig          |   9 ++
 drivers/firmware/meson/Makefile         |   1 +
 drivers/firmware/meson/meson_sm.c       | 247 ++++++++++++++++++++++++++++++++
 include/linux/firmware/meson/meson_sm.h |  31 ++++
 6 files changed, 290 insertions(+)
 create mode 100644 drivers/firmware/meson/Kconfig
 create mode 100644 drivers/firmware/meson/Makefile
 create mode 100644 drivers/firmware/meson/meson_sm.c
 create mode 100644 include/linux/firmware/meson/meson_sm.h

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index 6664f11..686e395 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -199,5 +199,6 @@ config HAVE_ARM_SMCCC
 source "drivers/firmware/broadcom/Kconfig"
 source "drivers/firmware/google/Kconfig"
 source "drivers/firmware/efi/Kconfig"
+source "drivers/firmware/meson/Kconfig"
 
 endmenu
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 474bada..fc4bb09 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_QCOM_SCM_32)	+= qcom_scm-32.o
 CFLAGS_qcom_scm-32.o :=$(call as-instr,.arch armv7-a\n.arch_extension sec,-DREQUIRES_SEC=1) -march=armv7-a
 
 obj-y				+= broadcom/
+obj-y				+= meson/
 obj-$(CONFIG_GOOGLE_FIRMWARE)	+= google/
 obj-$(CONFIG_EFI)		+= efi/
 obj-$(CONFIG_UEFI_CPER)		+= efi/
diff --git a/drivers/firmware/meson/Kconfig b/drivers/firmware/meson/Kconfig
new file mode 100644
index 0000000..170d7e8
--- /dev/null
+++ b/drivers/firmware/meson/Kconfig
@@ -0,0 +1,9 @@
+#
+# Amlogic Secure Monitor driver
+#
+config MESON_SM
+	bool
+	default ARCH_MESON
+	depends on ARM64_4K_PAGES
+	help
+	  Say y here to enable the Amlogic secure monitor driver
diff --git a/drivers/firmware/meson/Makefile b/drivers/firmware/meson/Makefile
new file mode 100644
index 0000000..9ab3884
--- /dev/null
+++ b/drivers/firmware/meson/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_MESON_SM) +=	meson_sm.o
diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c
new file mode 100644
index 0000000..bba594e
--- /dev/null
+++ b/drivers/firmware/meson/meson_sm.c
@@ -0,0 +1,247 @@
+/*
+ * Amlogic Secure Monitor driver
+ *
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) "meson-sm: " fmt
+
+#include <linux/arm-smccc.h>
+#include <linux/bug.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/printk.h>
+#include <linux/types.h>
+
+#include <linux/firmware/meson/meson_sm.h>
+
+struct meson_sm_cmd {
+	unsigned int index;
+	u32 smc_id;
+};
+#define CMD(d, s) { .index = (d), .smc_id = (s), }
+
+struct meson_sm_chip {
+	unsigned int shmem_size;
+	u32 cmd_shmem_in_base;
+	u32 cmd_shmem_out_base;
+	struct meson_sm_cmd cmd[];
+};
+
+struct meson_sm_chip gxbb_chip = {
+	.shmem_size		= 0x1000,
+	.cmd_shmem_in_base	= 0x82000020,
+	.cmd_shmem_out_base	= 0x82000021,
+	.cmd = {
+		CMD(SM_EFUSE_READ,	0x82000030),
+		CMD(SM_EFUSE_WRITE,	0x82000031),
+		CMD(SM_EFUSE_USER_MAX,	0x82000033),
+		{ /* sentinel */ },
+	},
+};
+
+struct meson_sm_firmware {
+	const struct meson_sm_chip *chip;
+	void __iomem *sm_shmem_in_base;
+	void __iomem *sm_shmem_out_base;
+};
+
+static struct meson_sm_firmware fw;
+
+static u32 meson_sm_get_cmd(const struct meson_sm_chip *chip,
+			    unsigned int cmd_index)
+{
+	const struct meson_sm_cmd *cmd = chip->cmd;
+
+	while (cmd->smc_id && cmd->index != cmd_index)
+		cmd++;
+
+	return cmd->smc_id;
+}
+
+static u32 __meson_sm_call(u32 cmd, u32 arg0, u32 arg1, u32 arg2,
+			   u32 arg3, u32 arg4)
+{
+	struct arm_smccc_res res;
+
+	arm_smccc_smc(cmd, arg0, arg1, arg2, arg3, arg4, 0, 0, &res);
+	return res.a0;
+}
+
+static void __iomem *meson_sm_map_shmem(u32 cmd_shmem, unsigned int size)
+{
+	u32 sm_phy_base;
+
+	sm_phy_base = __meson_sm_call(cmd_shmem, 0, 0, 0, 0, 0);
+	if (!sm_phy_base)
+		return 0;
+
+	return ioremap_cache(sm_phy_base, size);
+}
+
+/**
+ * meson_sm_call - generic SMC32 call to the secure-monitor
+ *
+ * @cmd_index:	Index of the SMC32 function ID
+ * @ret:	Returned value
+ * @arg0:	SMC32 Argument 0
+ * @arg1:	SMC32 Argument 1
+ * @arg2:	SMC32 Argument 2
+ * @arg3:	SMC32 Argument 3
+ * @arg4:	SMC32 Argument 4
+ *
+ * Return:	0 on success, a negative value on error
+ */
+int meson_sm_call(unsigned int cmd_index, u32 *ret, u32 arg0,
+		  u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 cmd, lret;
+
+	if (!fw.chip)
+		return -ENOENT;
+
+	cmd = meson_sm_get_cmd(fw.chip, cmd_index);
+	if (!cmd)
+		return -EINVAL;
+
+	lret = __meson_sm_call(cmd, arg0, arg1, arg2, arg3, arg4);
+
+	if (ret)
+		*ret = lret;
+
+	return 0;
+}
+EXPORT_SYMBOL(meson_sm_call);
+
+/**
+ * meson_sm_call_read - retrieve data from secure-monitor
+ *
+ * @buffer:	Buffer to store the retrieved data
+ * @cmd_index:	Index of the SMC32 function ID
+ * @arg0:	SMC32 Argument 0
+ * @arg1:	SMC32 Argument 1
+ * @arg2:	SMC32 Argument 2
+ * @arg3:	SMC32 Argument 3
+ * @arg4:	SMC32 Argument 4
+ *
+ * Return:	size of read data on success, a negative value on error
+ */
+int meson_sm_call_read(void *buffer, unsigned int cmd_index, u32 arg0,
+		       u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 size;
+
+	if (!fw.chip)
+		return -ENOENT;
+
+	if (!fw.chip->cmd_shmem_out_base)
+		return -EINVAL;
+
+	if (meson_sm_call(cmd_index, &size, arg0, arg1, arg2, arg3, arg4) < 0)
+		return -EINVAL;
+
+	if (!size || size > fw.chip->shmem_size)
+		return -EINVAL;
+
+	if (buffer)
+		memcpy(buffer, fw.sm_shmem_out_base, size);
+
+	return size;
+}
+EXPORT_SYMBOL(meson_sm_call_read);
+
+/**
+ * meson_sm_call_write - send data to secure-monitor
+ *
+ * @buffer:	Buffer containing data to send
+ * @size:	Size of the data to send
+ * @cmd_index:	Index of the SMC32 function ID
+ * @arg0:	SMC32 Argument 0
+ * @arg1:	SMC32 Argument 1
+ * @arg2:	SMC32 Argument 2
+ * @arg3:	SMC32 Argument 3
+ * @arg4:	SMC32 Argument 4
+ *
+ * Return:	size of sent data on success, a negative value on error
+ */
+int meson_sm_call_write(void *buffer, unsigned int size, unsigned int cmd_index,
+			u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4)
+{
+	u32 written;
+
+	if (!fw.chip)
+		return -ENOENT;
+
+	if (size > fw.chip->shmem_size)
+		return -EINVAL;
+
+	if (!fw.chip->cmd_shmem_in_base)
+		return -EINVAL;
+
+	memcpy(fw.sm_shmem_in_base, buffer, size);
+
+	if (meson_sm_call(cmd_index, &written, arg0, arg1, arg2, arg3, arg4) < 0)
+		return -EINVAL;
+
+	if (!written)
+		return -EINVAL;
+
+	return written;
+}
+EXPORT_SYMBOL(meson_sm_call_write);
+
+static const struct of_device_id meson_sm_ids[] = {
+	{ .compatible = "amlogic,meson-gxbb-sm", .data = &gxbb_chip },
+	{ /* sentinel */ },
+};
+
+int __init meson_sm_init(void)
+{
+	const struct meson_sm_chip *chip;
+	const struct of_device_id *matched_np;
+	struct device_node *np;
+
+	np = of_find_matching_node_and_match(NULL, meson_sm_ids, &matched_np);
+	if (!np)
+		return -ENODEV;
+
+	chip = matched_np->data;
+	if (!chip) {
+		pr_err("unable to setup secure-monitor data\n");
+		goto out;
+	}
+
+	if (chip->cmd_shmem_in_base) {
+		fw.sm_shmem_in_base = meson_sm_map_shmem(chip->cmd_shmem_in_base,
+							 chip->shmem_size);
+		if (WARN_ON(!fw.sm_shmem_in_base))
+			goto out;
+	}
+
+	if (chip->cmd_shmem_out_base) {
+		fw.sm_shmem_out_base = meson_sm_map_shmem(chip->cmd_shmem_out_base,
+							  chip->shmem_size);
+		if (WARN_ON(!fw.sm_shmem_out_base))
+			goto out_in_base;
+	}
+
+	fw.chip = chip;
+	pr_info("secure-monitor enabled\n");
+
+	return 0;
+
+out_in_base:
+	iounmap(fw.sm_shmem_in_base);
+out:
+	return -EINVAL;
+}
+device_initcall(meson_sm_init);
diff --git a/include/linux/firmware/meson/meson_sm.h b/include/linux/firmware/meson/meson_sm.h
new file mode 100644
index 0000000..8e953c6
--- /dev/null
+++ b/include/linux/firmware/meson/meson_sm.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2016 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _MESON_SM_FW_H_
+#define _MESON_SM_FW_H_
+
+enum {
+	SM_EFUSE_READ,
+	SM_EFUSE_WRITE,
+	SM_EFUSE_USER_MAX,
+};
+
+struct meson_sm_firmware;
+
+int meson_sm_call(unsigned int cmd_index, u32 *ret, u32 arg0, u32 arg1,
+		  u32 arg2, u32 arg3, u32 arg4);
+int meson_sm_call_write(void *buffer, unsigned int b_size, unsigned int cmd_index,
+			u32 arg0, u32 arg1, u32 arg2, u32 arg3, u32 arg4);
+int meson_sm_call_read(void *buffer, unsigned int cmd_index, u32 arg0, u32 arg1,
+		       u32 arg2, u32 arg3, u32 arg4);
+
+#endif /* _MESON_SM_FW_H_ */
-- 
2.7.4

[PATCH v2 1/6] firmware: Amlogic: Add secure monitor driver

[Carlo Caione]

On 29/06/16 14:34, Carlo Caione wrote:
> From: Carlo Caione <carlo@endlessm.com>
> 
> Introduce a driver to provide calls into secure monitor mode.
> 
> In the Amlogic SoCs these calls are used for multiple reasons: access to
> NVMEM, set USB boot, enable JTAG, etc...
> 
> Signed-off-by: Carlo Caione <carlo@endlessm.com>

(gentle ping)

Mark,
any comment on this?

thanks,

-- 
Carlo Caione

[PATCH v2 1/6] firmware: Amlogic: Add secure monitor driver

[Mark Rutland]

Hi,

Sorry for the delay.

I don't have any major comments, there are jsut a couple of minor
details.

> +config MESON_SM
> +	bool
> +	default ARCH_MESON
> +	depends on ARM64_4K_PAGES

It would be good to have a commentin the code as to why we depend on
ARM64_4K_PAGES.

That way it's possible for others to figure out without having to go
digging through mail archives and/or git logs.

[...]

> +struct meson_sm_chip gxbb_chip = {
> +	.shmem_size		= 0x1000,

If you include <linux/sizes.h>, you can use SZ_4K here.

Immediately above this is probably the best place for the comment
regarding the 4K page restriction imposed by the FW interface.

Other than that this looks fine, so FWIW:

Acked-by: Mark Rutland <mark.rutland@arm.com>

Thanks,
Mark.

[PATCH v2 2/6] documentation: Add secure monitor bindings documentation

[Carlo Caione]

From: Carlo Caione <carlo@endlessm.com>

Add the binding documentation for the Amlogic secure monitor driver.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/firmware/meson/meson_sm.txt       | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/meson/meson_sm.txt

diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
new file mode 100644
index 0000000..c248cd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
@@ -0,0 +1,15 @@
+* Amlogic Secure Monitor
+
+In the Amlogic SoCs the Secure Monitor code is used to provide access to the
+NVMEM, enable JTAG, set USB boot, etc...
+
+Required properties for the secure monitor node:
+- compatible: Should be "amlogic,meson-gxbb-sm"
+
+Example:
+
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+		};
+	};
-- 
2.7.4

[PATCH v2 3/6] ARM64: dts: amlogic: gxbb: Enable secure monitor

[Carlo Caione]

From: Carlo Caione <carlo@endlessm.com>

Add the secure monitor node in the Amlogic Meson GXBB DTSI file to
enable it.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 832815d..f2a4734 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -97,6 +97,12 @@
 		method = "smc";
 	};
 
+	firmware {
+		sm: secure-monitor {
+			compatible = "amlogic,meson-gxbb-sm";
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
-- 
2.7.4

[PATCH v2 4/6] nvmem: amlogic: Add Amlogic Meson EFUSE driver

[Carlo Caione]

From: Carlo Caione <carlo@endlessm.com>

Add Amlogic EFUSE driver to access hardware data like ethernet address,
serial number or IDs.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
 drivers/nvmem/Kconfig       | 10 +++++
 drivers/nvmem/Makefile      |  2 +
 drivers/nvmem/meson-efuse.c | 93 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 105 insertions(+)
 create mode 100644 drivers/nvmem/meson-efuse.c

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 3041d48..87900d3 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -101,4 +101,14 @@ config NVMEM_VF610_OCOTP
 	  This driver can also be build as a module. If so, the module will
 	  be called nvmem-vf610-ocotp.
 
+config MESON_EFUSE
+	tristate "Amlogic eFuse Support"
+	depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
+	help
+	  This is a driver to retrieve specific values from the eFuse found on
+	  the Amlogic Meson SoCs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_meson_efuse.
+
 endif
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 45ab1ae..8f942a0 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -22,3 +22,5 @@ obj-$(CONFIG_NVMEM_SUNXI_SID)	+= nvmem_sunxi_sid.o
 nvmem_sunxi_sid-y		:= sunxi_sid.o
 obj-$(CONFIG_NVMEM_VF610_OCOTP)	+= nvmem-vf610-ocotp.o
 nvmem-vf610-ocotp-y		:= vf610-ocotp.o
+obj-$(CONFIG_MESON_EFUSE)	+= nvmem_meson_efuse.o
+nvmem_meson_efuse-y		:= meson-efuse.o
diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c
new file mode 100644
index 0000000..f207c3b
--- /dev/null
+++ b/drivers/nvmem/meson-efuse.c
@@ -0,0 +1,93 @@
+/*
+ * Amlogic eFuse Driver
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include <linux/firmware/meson/meson_sm.h>
+
+static int meson_efuse_read(void *context, unsigned int offset,
+			    void *val, size_t bytes)
+{
+	u8 *buf = val;
+	int ret;
+
+	ret = meson_sm_call_read(buf, SM_EFUSE_READ, offset,
+				 bytes, 0, 0, 0);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct nvmem_config econfig = {
+	.name = "meson-efuse",
+	.owner = THIS_MODULE,
+	.stride = 1,
+	.word_size = 1,
+	.read_only = true,
+};
+
+static const struct of_device_id meson_efuse_match[] = {
+	{ .compatible = "amlogic,meson-gxbb-efuse", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_efuse_match);
+
+static int meson_efuse_probe(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem;
+	unsigned int size;
+
+	if (meson_sm_call(SM_EFUSE_USER_MAX, &size, 0, 0, 0, 0, 0) < 0)
+		return -EINVAL;
+
+	econfig.dev = &pdev->dev;
+	econfig.reg_read = meson_efuse_read;
+	econfig.size = size;
+
+	nvmem = nvmem_register(&econfig);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static int meson_efuse_remove(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(nvmem);
+}
+
+static struct platform_driver meson_efuse_driver = {
+	.probe = meson_efuse_probe,
+	.remove = meson_efuse_remove,
+	.driver = {
+		.name = "meson-efuse",
+		.of_match_table = meson_efuse_match,
+	},
+};
+
+module_platform_driver(meson_efuse_driver);
+
+MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
+MODULE_DESCRIPTION("Amlogic Meson NVMEM driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4

[PATCH v2 4/6] nvmem: amlogic: Add Amlogic Meson EFUSE driver

[Srinivas Kandagatla]

On 29/06/16 13:34, Carlo Caione wrote:
> From: Carlo Caione <carlo@endlessm.com>
>
> Add Amlogic EFUSE driver to access hardware data like ethernet address,
> serial number or IDs.
>
> Signed-off-by: Carlo Caione <carlo@endlessm.com>

Patch looks good to me,

Looks like there are some dependencies to this patch w.r.t sm_calls, it 
would be easy to take this series from single tree.

Just incase you want to take this patch via some other tree, here is Ack.

Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>



> ---
>   drivers/nvmem/Kconfig       | 10 +++++
>   drivers/nvmem/Makefile      |  2 +
>   drivers/nvmem/meson-efuse.c | 93 +++++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 105 insertions(+)
>   create mode 100644 drivers/nvmem/meson-efuse.c
>
> diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
> index 3041d48..87900d3 100644
> --- a/drivers/nvmem/Kconfig
> +++ b/drivers/nvmem/Kconfig
> @@ -101,4 +101,14 @@ config NVMEM_VF610_OCOTP
>   	  This driver can also be build as a module. If so, the module will
>   	  be called nvmem-vf610-ocotp.
>
> +config MESON_EFUSE
> +	tristate "Amlogic eFuse Support"
> +	depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
> +	help
> +	  This is a driver to retrieve specific values from the eFuse found on
> +	  the Amlogic Meson SoCs.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called nvmem_meson_efuse.
> +
>   endif
> diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
> index 45ab1ae..8f942a0 100644
> --- a/drivers/nvmem/Makefile
> +++ b/drivers/nvmem/Makefile
> @@ -22,3 +22,5 @@ obj-$(CONFIG_NVMEM_SUNXI_SID)	+= nvmem_sunxi_sid.o
>   nvmem_sunxi_sid-y		:= sunxi_sid.o
>   obj-$(CONFIG_NVMEM_VF610_OCOTP)	+= nvmem-vf610-ocotp.o
>   nvmem-vf610-ocotp-y		:= vf610-ocotp.o
> +obj-$(CONFIG_MESON_EFUSE)	+= nvmem_meson_efuse.o
> +nvmem_meson_efuse-y		:= meson-efuse.o
> diff --git a/drivers/nvmem/meson-efuse.c b/drivers/nvmem/meson-efuse.c
> new file mode 100644
> index 0000000..f207c3b
> --- /dev/null
> +++ b/drivers/nvmem/meson-efuse.c
> @@ -0,0 +1,93 @@
> +/*
> + * Amlogic eFuse Driver
> + *
> + * Copyright (c) 2016 Endless Computers, Inc.
> + * Author: Carlo Caione <carlo@endlessm.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of version 2 of the GNU General Public License as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/nvmem-provider.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/firmware/meson/meson_sm.h>
> +
> +static int meson_efuse_read(void *context, unsigned int offset,
> +			    void *val, size_t bytes)
> +{
> +	u8 *buf = val;
> +	int ret;
> +
> +	ret = meson_sm_call_read(buf, SM_EFUSE_READ, offset,
> +				 bytes, 0, 0, 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static struct nvmem_config econfig = {
> +	.name = "meson-efuse",
> +	.owner = THIS_MODULE,
> +	.stride = 1,
> +	.word_size = 1,
> +	.read_only = true,
> +};
> +
> +static const struct of_device_id meson_efuse_match[] = {
> +	{ .compatible = "amlogic,meson-gxbb-efuse", },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, meson_efuse_match);
> +
> +static int meson_efuse_probe(struct platform_device *pdev)
> +{
> +	struct nvmem_device *nvmem;
> +	unsigned int size;
> +
> +	if (meson_sm_call(SM_EFUSE_USER_MAX, &size, 0, 0, 0, 0, 0) < 0)
> +		return -EINVAL;
> +
> +	econfig.dev = &pdev->dev;
> +	econfig.reg_read = meson_efuse_read;
> +	econfig.size = size;
> +
> +	nvmem = nvmem_register(&econfig);
> +	if (IS_ERR(nvmem))
> +		return PTR_ERR(nvmem);
> +
> +	platform_set_drvdata(pdev, nvmem);
> +
> +	return 0;
> +}
> +
> +static int meson_efuse_remove(struct platform_device *pdev)
> +{
> +	struct nvmem_device *nvmem = platform_get_drvdata(pdev);
> +
> +	return nvmem_unregister(nvmem);
> +}
> +
> +static struct platform_driver meson_efuse_driver = {
> +	.probe = meson_efuse_probe,
> +	.remove = meson_efuse_remove,
> +	.driver = {
> +		.name = "meson-efuse",
> +		.of_match_table = meson_efuse_match,
> +	},
> +};
> +
> +module_platform_driver(meson_efuse_driver);
> +
> +MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
> +MODULE_DESCRIPTION("Amlogic Meson NVMEM driver");
> +MODULE_LICENSE("GPL v2");
>

[PATCH v2 4/6] nvmem: amlogic: Add Amlogic Meson EFUSE driver

[Carlo Caione]

On 01/07/16 11:00, Srinivas Kandagatla wrote:
> 
> 
> On 29/06/16 13:34, Carlo Caione wrote:
> >From: Carlo Caione <carlo@endlessm.com>
> >
> >Add Amlogic EFUSE driver to access hardware data like ethernet address,
> >serial number or IDs.
> >
> >Signed-off-by: Carlo Caione <carlo@endlessm.com>
> 
> Patch looks good to me,
> 
> Looks like there are some dependencies to this patch w.r.t sm_calls, it
> would be easy to take this series from single tree.
> 
> Just incase you want to take this patch via some other tree, here is Ack.
> 
> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

Thanks, probably it's better to merge everything through the arm-soc tree.

Cheers,

-- 
Carlo Caione

[PATCH v2 5/6] documentation: Add nvmem bindings documentation

[Carlo Caione]

From: Carlo Caione <carlo@endlessm.com>

This patch add the bindings document of Amlogic eFuse driver.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/nvmem/amlogic-efuse.txt    | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt

diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
new file mode 100644
index 0000000..fafd85b
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
@@ -0,0 +1,39 @@
+= Amlogic eFuse device tree bindings =
+
+Required properties:
+- compatible: should be "amlogic,meson-gxbb-efuse"
+
+= Data cells =
+Are child nodes of eFuse, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sn: sn at 14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth_mac at 34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid at 46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+For example:
+
+	eth_mac {
+		...
+		nvmem-cells = <&eth_mac>;
+		nvmem-cell-names = "eth_mac";
+	};
-- 
2.7.4

[PATCH v2 5/6] documentation: Add nvmem bindings documentation

[Srinivas Kandagatla]

On 29/06/16 13:34, Carlo Caione wrote:
> From: Carlo Caione <carlo@endlessm.com>
>
> This patch add the bindings document of Amlogic eFuse driver.
>
> Signed-off-by: Carlo Caione <carlo@endlessm.com>
> Acked-by: Rob Herring <robh@kernel.org>

Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

> ---
>   .../devicetree/bindings/nvmem/amlogic-efuse.txt    | 39 ++++++++++++++++++++++
>   1 file changed, 39 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
>
> diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
> new file mode 100644
> index 0000000..fafd85b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
> @@ -0,0 +1,39 @@
> += Amlogic eFuse device tree bindings =
> +
> +Required properties:
> +- compatible: should be "amlogic,meson-gxbb-efuse"
> +
> += Data cells =
> +Are child nodes of eFuse, bindings of which as described in
> +bindings/nvmem/nvmem.txt
> +
> +Example:
> +
> +	efuse: efuse {
> +		compatible = "amlogic,meson-gxbb-efuse";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		sn: sn at 14 {
> +			reg = <0x14 0x10>;
> +		};
> +
> +		eth_mac: eth_mac at 34 {
> +			reg = <0x34 0x10>;
> +		};
> +
> +		bid: bid at 46 {
> +			reg = <0x46 0x30>;
> +		};
> +	};
> +
> += Data consumers =
> +Are device nodes which consume nvmem data cells.
> +
> +For example:
> +
> +	eth_mac {
> +		...
> +		nvmem-cells = <&eth_mac>;
> +		nvmem-cell-names = "eth_mac";
> +	};
>

[PATCH v2 6/6] ARM64: dts: amlogic: gxbb: Enable NVMEM

[Carlo Caione]

From: Carlo Caione <carlo@endlessm.com>

Add the NVMEM device node in the DTSI.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index f2a4734..f20f990 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -103,6 +103,24 @@
 		};
 	};
 
+	efuse: efuse {
+		compatible = "amlogic,meson-gxbb-efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		sn: sn at 14 {
+			reg = <0x14 0x10>;
+		};
+
+		eth_mac: eth_mac at 34 {
+			reg = <0x34 0x10>;
+		};
+
+		bid: bid at 46 {
+			reg = <0x46 0x30>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13
-- 
2.7.4