[PATCH V2 00/15] a few sdhci/imx clean up and fix patches

[dongas86@gmail.com (Dong Aisheng)]

On Tue, Jul 12, 2016 at 03:54:22PM +0200, Andrew Lunn wrote:
> On Tue, Jul 12, 2016 at 03:46:09PM +0800, Dong Aisheng wrote:
> > Patch 1~10 are mainly sdhci cleanup patches while patch 7,9,10
> > are fixes which seems needed for stable tree as well.
> 

Sorry for above a bit misleading information derived from V1

> Hi Dong
> 
> Fixed should be first, so they can be cherry-picked into stable.
> Cleanups come afterwards, since they will not be back ported into
> stable.
> 

Thanks for the suggestion.
I think except patch 2 (mmc: sdhci-esdhc-imx: remove SDHCI_QUIRK_BROKEN_TIMEOUT_VAL)
which is only a one line change, all others are good to be cherry-picked
into stable since they improves the stability and avoid potential issue.
Patch 2 seems won't block the cherry-pick.

So do you want me to reorder and resend?

Besides it, another patch in V1 as follows should also go to stable.
mmc: sdhci: fix incorrect get data interrupt during no data transfer
I could send it separately for stable tree.

Regards
Dong Aisheng

> Please change the order of the patches within the series.
> 
>        Andrew
> 
> 
> > 
> > The main work is:
> > 1) using more robust mmc_regulator_set_vqmmc 
> > 2) add auto retune support
> > 3) improve sdhci-esdhc-imx stability
> > 4) add state save and restore for low power mode
> > 
> > Change Log:
> > v1->v2:
> >  * address all Andrian's comments
> >  * below patches are dropped
> >   mmc: sdhci: move sdhci_get_cd() forward to avoid declaration
> >   mmc: core: fix a comment typo
> >   mmc: sdhci: re-factor sdhci_start_signal_voltage()
> >   mmc: core: mmc_regulator_set_vqmmc not return error if vqmmc/vmmc not
> >     exist
> >   mmc: sdhci: check SDHCI_QUIRK2_NO_1_8_V when do voltage switch
> >   mmc: sdhci: rename quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12
> > 	Above clean up is not needed so far according to Andrian.
> > 
> >   mmc: sdhci: fix incorrect get data interrupt during no data transfer
> > 	This one is not needed anymore cause Andrian had another fix
> > 	already in tree.
> > 	(commit 0e0a35d2d4058 mmc: sdhci: Track whether a reset is pending)
> > 
> >   mmc: core: disable auto retune during card detection process
> > 	This one will sent out in another patch series to fix in CORE.
> > 
> > v1:
> > http://www.spinics.net/lists/linux-mmc/msg36316.html
> > 
> > Dong Aisheng (15):
> >   mmc: sdhci: using common mmc_regulator_set_vqmmc()
> >   mmc: sdhci-esdhc-imx: remove SDHCI_QUIRK_BROKEN_TIMEOUT_VAL
> >   mmc: sdhci-esdhc-imx: add esdhc specific suspend resume callback
> >   mmc: sdhci-esdhc-imx: restore watermark level setting after resume
> >   mmc: sdhci-esdhci-imx: disable DLL delay line settings explicitly
> >   mmc: sdhci-esdhc-imx: support setting tuning start point
> >   doc: dt: fsl-imx-esdhc: add set tuning start point binding
> >   mmc: sdhci: add standard hw auto retuning support
> >   mmc: sdhci-esdhc-imx: enable hw auto retuning for STD_TUNING
> >   mmc: sdhci-esdhc-imx: enable hw auto retuning for MAN_TUNING
> >   mmc: sdhci-esdhc-imx: fix strobe DLL lock wrong clock issue
> >   mmc: sdhci-esdhc-imx: factor out hw related initialization into
> >     function
> >   mmc: sdhci-esdhc-imx: move tuning static configuration into hwinit
> >     function
> >   mmc: sdhci-esdhci-imx: re-initialize hw state after resume
> >   mmc: sdhci-esdhc-imx: clear tuning bits during driver probe
> > 
> >  .../devicetree/bindings/mmc/fsl-imx-esdhc.txt      |   2 +
> >  drivers/mmc/host/sdhci-esdhc-imx.c                 | 149 ++++++++++++++-------
> >  drivers/mmc/host/sdhci.c                           |  24 ++--
> >  drivers/mmc/host/sdhci.h                           |   3 +
> >  include/linux/platform_data/mmc-esdhc-imx.h        |   1 +
> >  5 files changed, 122 insertions(+), 57 deletions(-)
> > 
> > -- 
> > 1.9.1
> > 
> > 
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel