From: maxime.ripard@free-electrons.com (Maxime Ripard)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/5] mfd: sunxi-gpadc-mfd: probe sunxi-gpadc-ts driver
Date: Thu, 21 Jul 2016 08:08:12 +0200 [thread overview]
Message-ID: <20160721060812.GA5993@lukather> (raw)
In-Reply-To: <1469003351-15263-6-git-send-email-quentin.schulz@free-electrons.com>
Hi Quentin,
On Wed, Jul 20, 2016 at 10:29:11AM +0200, Quentin Schulz wrote:
> This probes the touchscreen driver for Allwinner SoCs (A10, A13 and A31)
> when the property "allwinner,ts-attached" is set in the GPADC (rtp) node of
> the DT.
>
> Some comestic modifications done to shorten and increase readability of the
> code.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
> ---
> drivers/mfd/sunxi-gpadc-mfd.c | 115 ++++++++++++++++++++++++++++--------------
> 1 file changed, 77 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/mfd/sunxi-gpadc-mfd.c b/drivers/mfd/sunxi-gpadc-mfd.c
> index 05a000b..9b9ed0b 100644
> --- a/drivers/mfd/sunxi-gpadc-mfd.c
> +++ b/drivers/mfd/sunxi-gpadc-mfd.c
> @@ -21,6 +21,11 @@
> #define SUNXI_IRQ_TEMP_DATA 1
> #define SUNXI_IRQ_TP_UP 2
>
> +#define SUNXI_GPADC_MFD_CELL(_name, _resources, _num_resources) { \
> + .name = _name, \
> + .resources = _resources, \
> + .num_resources = _num_resources \
> +}
>
> static struct resource adc_resources[] = {
> {
> @@ -64,33 +69,45 @@ static const struct regmap_irq_chip sunxi_gpadc_mfd_regmap_irq_chip = {
> };
>
> static struct mfd_cell sun4i_gpadc_mfd_cells[] = {
> - {
> - .name = "sun4i-a10-gpadc-iio",
> - .resources = adc_resources,
> - .num_resources = ARRAY_SIZE(adc_resources),
> - }, {
> - .name = "iio_hwmon",
> - }
> + SUNXI_GPADC_MFD_CELL("sun4i-a10-gpadc-iio", adc_resources,
> + ARRAY_SIZE(adc_resources)),
> + SUNXI_GPADC_MFD_CELL("iio_hwmon", NULL, 0),
> };
>
> static struct mfd_cell sun5i_gpadc_mfd_cells[] = {
> - {
> - .name = "sun5i-a13-gpadc-iio",
> - .resources = adc_resources,
> - .num_resources = ARRAY_SIZE(adc_resources),
> - }, {
> - .name = "iio_hwmon",
> - },
> + SUNXI_GPADC_MFD_CELL("sun5i-a13-gpadc-iio", adc_resources,
> + ARRAY_SIZE(adc_resources)),
> + SUNXI_GPADC_MFD_CELL("iio_hwmon", NULL, 0),
> };
>
> static struct mfd_cell sun6i_gpadc_mfd_cells[] = {
> - {
> - .name = "sun6i-a31-gpadc-iio",
> - .resources = adc_resources,
> - .num_resources = ARRAY_SIZE(adc_resources),
> - }, {
> - .name = "iio_hwmon",
> - },
> + SUNXI_GPADC_MFD_CELL("sun6i-a31-gpadc-iio", adc_resources,
> + ARRAY_SIZE(adc_resources)),
> + SUNXI_GPADC_MFD_CELL("iio_hwmon", NULL, 0),
> +};
This should be part of a separate patch.
> +
> +static struct mfd_cell sun4i_gpadc_mfd_cells_ts[] = {
> + SUNXI_GPADC_MFD_CELL("sun6i-a31-gpadc-iio", adc_resources,
> + ARRAY_SIZE(adc_resources)),
> + SUNXI_GPADC_MFD_CELL("iio_hwmon", NULL, 0),
> + SUNXI_GPADC_MFD_CELL("sunxi-gpadc-ts", ts_resources,
> + ARRAY_SIZE(ts_resources)),
> +};
> +
> +static struct mfd_cell sun5i_gpadc_mfd_cells_ts[] = {
> + SUNXI_GPADC_MFD_CELL("sun5i-a13-gpadc-iio", adc_resources,
> + ARRAY_SIZE(adc_resources)),
> + SUNXI_GPADC_MFD_CELL("iio_hwmon", NULL, 0),
> + SUNXI_GPADC_MFD_CELL("sunxi-gpadc-ts", ts_resources,
> + ARRAY_SIZE(ts_resources)),
> +};
> +
> +static struct mfd_cell sun6i_gpadc_mfd_cells_ts[] = {
> + SUNXI_GPADC_MFD_CELL("sun6i-a31-gpadc-iio", adc_resources,
> + ARRAY_SIZE(adc_resources)),
> + SUNXI_GPADC_MFD_CELL("iio_hwmon", NULL, 0),
> + SUNXI_GPADC_MFD_CELL("sunxi-gpadc-ts", ts_resources,
> + ARRAY_SIZE(ts_resources)),
> };
>
> static const struct regmap_config sunxi_gpadc_mfd_regmap_config = {
> @@ -142,23 +159,45 @@ static int sunxi_gpadc_mfd_probe(struct platform_device *pdev)
> }
>
> if (of_device_is_compatible(pdev->dev.of_node,
> - "allwinner,sun4i-a10-ts"))
> - ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> - sun4i_gpadc_mfd_cells,
> - ARRAY_SIZE(sun4i_gpadc_mfd_cells), NULL,
> - 0, NULL);
> - else if (of_device_is_compatible(pdev->dev.of_node,
> - "allwinner,sun5i-a13-ts"))
> - ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> - sun5i_gpadc_mfd_cells,
> - ARRAY_SIZE(sun5i_gpadc_mfd_cells), NULL,
> - 0, NULL);
> - else if (of_device_is_compatible(pdev->dev.of_node,
> - "allwinner,sun6i-a31-ts"))
> - ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> - sun6i_gpadc_mfd_cells,
> - ARRAY_SIZE(sun6i_gpadc_mfd_cells), NULL,
> - 0, NULL);
> + "allwinner,sun4i-a10-ts")) {
> + if (of_property_read_bool(pdev->dev.of_node,
> + "allwinner,ts-attached"))
> + ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> + sun4i_gpadc_mfd_cells_ts,
> + ARRAY_SIZE(sun4i_gpadc_mfd_cells_ts),
> + NULL, 0, NULL);
> + else
> + ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> + sun4i_gpadc_mfd_cells,
> + ARRAY_SIZE(sun4i_gpadc_mfd_cells),
> + NULL, 0, NULL);
> + } else if (of_device_is_compatible(pdev->dev.of_node,
> + "allwinner,sun5i-a13-ts")) {
> + if (of_property_read_bool(pdev->dev.of_node,
> + "allwinner,ts-attached"))
> + ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> + sun5i_gpadc_mfd_cells_ts,
> + ARRAY_SIZE(sun5i_gpadc_mfd_cells_ts),
> + NULL, 0, NULL);
> + else
> + ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> + sun5i_gpadc_mfd_cells,
> + ARRAY_SIZE(sun5i_gpadc_mfd_cells),
> + NULL, 0, NULL);
> + } else if (of_device_is_compatible(pdev->dev.of_node,
> + "allwinner,sun6i-a31-ts")) {
> + if (of_property_read_bool(pdev->dev.of_node,
> + "allwinner,ts-attached"))
> + ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> + sun6i_gpadc_mfd_cells_ts,
> + ARRAY_SIZE(sun6i_gpadc_mfd_cells_ts),
> + NULL, 0, NULL);
> + else
> + ret = mfd_add_devices(sunxi_gpadc_mfd_dev->dev, 0,
> + sun6i_gpadc_mfd_cells,
> + ARRAY_SIZE(sun6i_gpadc_mfd_cells),
> + NULL, 0, NULL);
> + }
Please don't use any of_device_is_compatible.
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160721/2b13f92a/attachment-0001.sig>
next prev parent reply other threads:[~2016-07-21 6:08 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-20 8:29 [PATCH 0/5] add resistive touchscreen support for new Allwinner SoCs' GPADC's driver Quentin Schulz
2016-07-20 8:29 ` [PATCH 1/5] mfd: sunxi-gpadc-mfd: add TP_UP_PENDING irq Quentin Schulz
2016-07-20 8:29 ` [PATCH 2/5] mfd: sunxi-gpadc-mfd: add buffer structure Quentin Schulz
2016-07-24 10:32 ` Jonathan Cameron
2016-07-20 8:29 ` [PATCH 3/5] iio: adc: sunxi-gpadc-iio: enable iio_buffers Quentin Schulz
2016-07-20 8:38 ` Peter Meerwald-Stadler
2016-07-20 8:57 ` Quentin Schulz
2016-07-24 11:03 ` Jonathan Cameron
2016-09-24 17:40 ` Quentin Schulz
2016-09-25 9:10 ` Jonathan Cameron
2016-09-25 19:57 ` Quentin Schulz
2016-09-27 19:38 ` Jonathan Cameron
2016-07-20 8:29 ` [PATCH 4/5] input: touchscreen: support Allwinner SoCs' touchscreen Quentin Schulz
2016-07-20 17:25 ` Dmitry Torokhov
2016-07-20 20:13 ` Jonathan Cameron
2016-09-24 18:26 ` Quentin Schulz
2016-09-24 18:39 ` Dmitry Torokhov
2016-07-21 6:29 ` Maxime Ripard
2016-07-21 6:41 ` Dmitry Torokhov
2016-07-25 9:45 ` maxime.ripard at free-electrons.com
2016-07-25 17:08 ` Dmitry Torokhov
2016-07-26 15:13 ` Maxime Ripard
2016-07-24 11:24 ` Jonathan Cameron
2016-09-25 19:44 ` Quentin Schulz
2016-09-27 19:59 ` Jonathan Cameron
2016-07-20 8:29 ` [PATCH 5/5] mfd: sunxi-gpadc-mfd: probe sunxi-gpadc-ts driver Quentin Schulz
2016-07-21 6:08 ` Maxime Ripard [this message]
2016-07-24 11:26 ` Jonathan Cameron
2016-07-25 9:51 ` Maxime Ripard
2016-07-25 10:08 ` Jonathan Cameron
2016-07-25 10:21 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160721060812.GA5993@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).