From: shawnguo@kernel.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] ARM: dts: imx6sx-udoo-neo: Add SD
Date: Mon, 8 Aug 2016 22:12:48 +0800 [thread overview]
Message-ID: <20160808141248.GI4678@tiger> (raw)
In-Reply-To: <1467691450-22975-4-git-send-email-afaerber@suse.de>
On Tue, Jul 05, 2016 at 06:04:10AM +0200, Andreas F?rber wrote:
> Enable the SDHC node and model the SDIO_PWR GPIO as a regulator.
> Use the SD card as default trigger for the red LED.
>
> Cc: Ettore Chimenti <ettore.chimenti@udoo.org>
> Signed-off-by: Andreas F?rber <afaerber@suse.de>
> ---
>
>
> arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 34 ++++++++++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
> index e074409644d8..85f5e8606dab 100644
> --- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
> +++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
> @@ -56,6 +56,7 @@
> label = "udoo-neo:red:mmc";
> gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
> default-state = "off";
> + linux,default-trigger = "mmc0";
> };
>
> orange {
> @@ -64,6 +65,17 @@
> default-state = "keep";
> };
> };
> +
> + sdio_pwr_reg: sd-gpio-regulator {
> + compatible = "regulator-fixed";
> + gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + regulator-name = "SDIO_PWR";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
Is it correct to model SDIO power control GPIO as a boot-on and
always-on fixed regulator? It will be powered-on even when SDIO driver
is not enabled or loaded.
Shawn
> };
>
> &cpu0 {
> @@ -230,6 +242,17 @@
> <MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x1b0b1>,
> <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>;
> };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins =
> + <MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059>,
> + <MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059>,
> + <MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059>,
> + <MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059>,
> + <MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059>,
> + <MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059>,
> + <MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059>; /* CD */
> + };
> };
> };
>
> @@ -259,3 +282,14 @@
> uart-has-rtscts;
> status = "disabled";
> };
> +
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>;
> + bus-width = <4>;
> + cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
> + no-1-8-v;
> + keep-power-in-suspend;
> + wakeup-source;
> + status = "okay";
> +};
> --
> 2.6.6
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2016-08-08 14:12 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-05 4:04 [PATCH 0/3] ARM: dts: imx6sx: Initial UDOO Neo enablement Andreas Färber
2016-07-05 4:04 ` [PATCH 1/3] ARM: dts: imx6sx-sabreauto: Fix misspelled property Andreas Färber
2016-07-05 8:54 ` Sudeep Holla
2016-08-08 13:58 ` Shawn Guo
2016-07-05 4:04 ` [PATCH 2/3] ARM: dts: imx6sx: Add UDOO Neo support Andreas Färber
2016-07-05 6:27 ` Uwe Kleine-König
2016-07-05 14:46 ` Andreas Färber
2016-07-05 12:04 ` Fabio Estevam
2016-07-05 13:55 ` Andreas Färber
2016-07-05 18:33 ` Uwe Kleine-König
2016-08-08 14:04 ` Shawn Guo
2016-07-05 4:04 ` [PATCH 3/3] ARM: dts: imx6sx-udoo-neo: Add SD Andreas Färber
2016-08-08 14:12 ` Shawn Guo [this message]
2016-08-08 15:00 ` Andreas Färber
2016-08-15 12:38 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160808141248.GI4678@tiger \
--to=shawnguo@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).