From: ville.syrjala@linux.intel.com (Ville Syrjälä)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 3/4] drm/mediatek: Add gamma correction.
Date: Thu, 11 Aug 2016 11:02:27 +0300 [thread overview]
Message-ID: <20160811080227.GH4329@intel.com> (raw)
In-Reply-To: <1470901876.2493.24.camel@pengutronix.de>
On Thu, Aug 11, 2016 at 09:51:16AM +0200, Philipp Zabel wrote:
> Am Donnerstag, den 11.08.2016, 10:44 +0300 schrieb Ville Syrj?l?:
> > On Thu, Aug 11, 2016 at 09:32:59AM +0200, Philipp Zabel wrote:
> > > Am Donnerstag, den 28.07.2016, 10:22 +0800 schrieb Bibby Hsieh:
> > > > Add gamma set function to correct brightness values.
> > > > It applies arbitrary mapping curve to compensate the
> > > > incorrect transfer function of the panel.
> > > >
> > > > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> > > > ---
> > > > drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 8 ++++++-
> > > > drivers/gpu/drm/mediatek/mtk_drm_crtc.h | 1 +
> > > > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 31 +++++++++++++++++++++++++++
> > > > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 10 +++++++++
> > > > 4 files changed, 49 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > > > index 24aa3ba..cbb460a5 100644
> > > > --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > > > @@ -409,6 +409,9 @@ static void mtk_drm_crtc_atomic_flush(struct drm_crtc *crtc,
> > > > }
> > > > if (pending_planes)
> > > > mtk_crtc->pending_planes = true;
> > > > + if (crtc->state->color_mgmt_changed)
> > > > + for (i = 0; i < mtk_crtc->ddp_comp_nr; i++)
> > > > + mtk_ddp_gamma_set(mtk_crtc->ddp_comp[i], crtc->state);
> > > > }
> > > >
> > > > static const struct drm_crtc_funcs mtk_crtc_funcs = {
> > > > @@ -418,6 +421,7 @@ static const struct drm_crtc_funcs mtk_crtc_funcs = {
> > > > .reset = mtk_drm_crtc_reset,
> > > > .atomic_duplicate_state = mtk_drm_crtc_duplicate_state,
> > > > .atomic_destroy_state = mtk_drm_crtc_destroy_state,
> > > > + .gamma_set = drm_atomic_helper_legacy_gamma_set,
> > > > };
> > > >
> > > > static const struct drm_crtc_helper_funcs mtk_crtc_helper_funcs = {
> > > > @@ -568,7 +572,9 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
> > > > &mtk_crtc->planes[1].base, pipe);
> > > > if (ret < 0)
> > > > goto unprepare;
> > > > -
> > > > + drm_mode_crtc_set_gamma_size(&mtk_crtc->base, MTK_LUT_SIZE);
> > > > + drm_helper_crtc_enable_color_mgmt(&mtk_crtc->base, MTK_LUT_SIZE,
> > > > + MTK_LUT_SIZE);
> > >
> > > I have applied all four patches and rebased onto v4.8-rc1, replacing
> > > drm_helper_crtc_enable_color_mgmt with:
> > >
> > > drm_crtc_enable_color_mgmt(&mtk_crtc->base, MTK_LUT_SIZE,
> > > true, MTK_LUT_SIZE);
> >
> > BTW that looks wrong (already in the original). AFAICS the patch just
> > handled the gamma_lut, not the degamma_lut, so telling you have both
> > is not right.
>
> Thanks, so should that be
> drm_crtc_enable_color_mgmt(&mtk_crtc->base, 0, false,
> MTK_LUT_SIZE);
> instead, since we only handle gamma?
Hmm. Yeah, that looks correct since you didn't seem to have "ctm" either.
--
Ville Syrj?l?
Intel OTC
next prev parent reply other threads:[~2016-08-11 8:02 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-28 2:22 [PATCH v4 0/4] drm/mediatek: MT8173 gamma & dither support Bibby Hsieh
2016-07-28 2:22 ` [PATCH v4 1/4] drm/mediatek: Add AAL engine basic function Bibby Hsieh
2016-07-28 2:22 ` [PATCH v4 2/4] drm/mediatek: Add GAMMA " Bibby Hsieh
2016-07-28 2:22 ` [PATCH v4 3/4] drm/mediatek: Add gamma correction Bibby Hsieh
2016-08-11 7:32 ` Philipp Zabel
2016-08-11 7:44 ` Ville Syrjälä
2016-08-11 7:51 ` Philipp Zabel
2016-08-11 8:02 ` Ville Syrjälä [this message]
2016-08-11 8:51 ` Daniel Vetter
2016-08-11 9:11 ` [PATCH v4.5 " Philipp Zabel
2016-07-28 2:22 ` [PATCH v4 4/4] drm/mediatek: set mt8173 dithering function Bibby Hsieh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160811080227.GH4329@intel.com \
--to=ville.syrjala@linux.intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox