* [PATCH] ARM: no need to select SMP_ON_UP explicitly
@ 2016-07-22 14:56 Vladimir Murzin
2016-08-09 8:44 ` Shawn Guo
0 siblings, 1 reply; 7+ messages in thread
From: Vladimir Murzin @ 2016-07-22 14:56 UTC (permalink / raw)
To: linux-arm-kernel
SMP_ON_UP is already defaulted to "y" and has all dependencies expressed
- no need to select it per platform level
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
---
This time sent to LAKML
arch/arm/mach-imx/Kconfig | 3 ---
arch/arm/mach-realview/Kconfig | 1 -
2 files changed, 4 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index dd905b9..cfb1120 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -92,7 +92,6 @@ config SOC_IMX31
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select MXC_AVIC
- select SMP_ON_UP if SMP
config SOC_IMX35
bool
@@ -100,7 +99,6 @@ config SOC_IMX35
select HAVE_EPIT
select MXC_AVIC
select PINCTRL_IMX35
- select SMP_ON_UP if SMP
if ARCH_MULTI_V4T
@@ -589,7 +587,6 @@ config SOC_VF610
select ARM_GIC if ARCH_MULTI_V7
select PINCTRL_VF610
select PL310_ERRATA_769419 if CACHE_L2X0
- select SMP_ON_UP if SMP
help
This enables support for Freescale Vybrid VF610 processor.
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 70ab4a2..739800e 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -24,7 +24,6 @@ config REALVIEW_DT
select POWER_RESET
select POWER_RESET_VERSATILE
select POWER_SUPPLY
- select SMP_ON_UP if SMP
select SOC_REALVIEW
select USE_OF
help
--
1.7.9.5
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH] ARM: no need to select SMP_ON_UP explicitly
2016-07-22 14:56 [PATCH] ARM: no need to select SMP_ON_UP explicitly Vladimir Murzin
@ 2016-08-09 8:44 ` Shawn Guo
2016-08-10 8:29 ` Vladimir Murzin
0 siblings, 1 reply; 7+ messages in thread
From: Shawn Guo @ 2016-08-09 8:44 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jul 22, 2016 at 03:56:09PM +0100, Vladimir Murzin wrote:
> SMP_ON_UP is already defaulted to "y" and has all dependencies expressed
> - no need to select it per platform level
>
> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
> ---
>
> This time sent to LAKML
>
> arch/arm/mach-imx/Kconfig | 3 ---
> arch/arm/mach-realview/Kconfig | 1 -
I cannot take mach-realview changes. I think you need to ether split
the changes, or ask arm-soc folks to apply. In case of the latter, here
is my ACK:
Acked-by: Shawn Guo <shawnguo@kernel.org>
> 2 files changed, 4 deletions(-)
>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index dd905b9..cfb1120 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -92,7 +92,6 @@ config SOC_IMX31
> select CPU_V6
> select IMX_HAVE_PLATFORM_MXC_RNGA
> select MXC_AVIC
> - select SMP_ON_UP if SMP
>
> config SOC_IMX35
> bool
> @@ -100,7 +99,6 @@ config SOC_IMX35
> select HAVE_EPIT
> select MXC_AVIC
> select PINCTRL_IMX35
> - select SMP_ON_UP if SMP
>
> if ARCH_MULTI_V4T
>
> @@ -589,7 +587,6 @@ config SOC_VF610
> select ARM_GIC if ARCH_MULTI_V7
> select PINCTRL_VF610
> select PL310_ERRATA_769419 if CACHE_L2X0
> - select SMP_ON_UP if SMP
>
> help
> This enables support for Freescale Vybrid VF610 processor.
> diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
> index 70ab4a2..739800e 100644
> --- a/arch/arm/mach-realview/Kconfig
> +++ b/arch/arm/mach-realview/Kconfig
> @@ -24,7 +24,6 @@ config REALVIEW_DT
> select POWER_RESET
> select POWER_RESET_VERSATILE
> select POWER_SUPPLY
> - select SMP_ON_UP if SMP
> select SOC_REALVIEW
> select USE_OF
> help
> --
> 1.7.9.5
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH] ARM: no need to select SMP_ON_UP explicitly
2016-08-09 8:44 ` Shawn Guo
@ 2016-08-10 8:29 ` Vladimir Murzin
2016-08-10 8:55 ` Arnd Bergmann
0 siblings, 1 reply; 7+ messages in thread
From: Vladimir Murzin @ 2016-08-10 8:29 UTC (permalink / raw)
To: linux-arm-kernel
On 09/08/16 09:44, Shawn Guo wrote:
> On Fri, Jul 22, 2016 at 03:56:09PM +0100, Vladimir Murzin wrote:
>> SMP_ON_UP is already defaulted to "y" and has all dependencies expressed
>> - no need to select it per platform level
>>
>> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
>> ---
>>
>> This time sent to LAKML
>>
>> arch/arm/mach-imx/Kconfig | 3 ---
>> arch/arm/mach-realview/Kconfig | 1 -
>
> I cannot take mach-realview changes. I think you need to ether split
> the changes, or ask arm-soc folks to apply. In case of the latter, here
> is my ACK:
>
> Acked-by: Shawn Guo <shawnguo@kernel.org>
Thanks!
RealView is not mentioned under MAINTAINERS, so it'd be easier if
arm-soc team pick this patch.
Arnd, what is your preference?
Cheers
Vladimir
>
>> 2 files changed, 4 deletions(-)
>>
>> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
>> index dd905b9..cfb1120 100644
>> --- a/arch/arm/mach-imx/Kconfig
>> +++ b/arch/arm/mach-imx/Kconfig
>> @@ -92,7 +92,6 @@ config SOC_IMX31
>> select CPU_V6
>> select IMX_HAVE_PLATFORM_MXC_RNGA
>> select MXC_AVIC
>> - select SMP_ON_UP if SMP
>>
>> config SOC_IMX35
>> bool
>> @@ -100,7 +99,6 @@ config SOC_IMX35
>> select HAVE_EPIT
>> select MXC_AVIC
>> select PINCTRL_IMX35
>> - select SMP_ON_UP if SMP
>>
>> if ARCH_MULTI_V4T
>>
>> @@ -589,7 +587,6 @@ config SOC_VF610
>> select ARM_GIC if ARCH_MULTI_V7
>> select PINCTRL_VF610
>> select PL310_ERRATA_769419 if CACHE_L2X0
>> - select SMP_ON_UP if SMP
>>
>> help
>> This enables support for Freescale Vybrid VF610 processor.
>> diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
>> index 70ab4a2..739800e 100644
>> --- a/arch/arm/mach-realview/Kconfig
>> +++ b/arch/arm/mach-realview/Kconfig
>> @@ -24,7 +24,6 @@ config REALVIEW_DT
>> select POWER_RESET
>> select POWER_RESET_VERSATILE
>> select POWER_SUPPLY
>> - select SMP_ON_UP if SMP
>> select SOC_REALVIEW
>> select USE_OF
>> help
>> --
>> 1.7.9.5
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH] ARM: no need to select SMP_ON_UP explicitly
2016-08-10 8:29 ` Vladimir Murzin
@ 2016-08-10 8:55 ` Arnd Bergmann
2016-08-10 12:25 ` Linus Walleij
0 siblings, 1 reply; 7+ messages in thread
From: Arnd Bergmann @ 2016-08-10 8:55 UTC (permalink / raw)
To: linux-arm-kernel
On Wednesday, August 10, 2016 9:29:11 AM CEST Vladimir Murzin wrote:
> On 09/08/16 09:44, Shawn Guo wrote:
> > On Fri, Jul 22, 2016 at 03:56:09PM +0100, Vladimir Murzin wrote:
> >> SMP_ON_UP is already defaulted to "y" and has all dependencies expressed
> >> - no need to select it per platform level
> >>
> >> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
> >> ---
> >>
> >> This time sent to LAKML
> >>
> >> arch/arm/mach-imx/Kconfig | 3 ---
> >> arch/arm/mach-realview/Kconfig | 1 -
> >
> > I cannot take mach-realview changes. I think you need to ether split
> > the changes, or ask arm-soc folks to apply. In case of the latter, here
> > is my ACK:
> >
> > Acked-by: Shawn Guo <shawnguo@kernel.org>
>
> Thanks!
>
> RealView is not mentioned under MAINTAINERS, so it'd be easier if
> arm-soc team pick this patch.
>
> Arnd, what is your preference?
Linus Walleij is the person that has sent most patches for realview,
so I'll let him decide. We can pick it up directly, or he can
aggregate it with other patches that he might have.
Arnd
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH] ARM: no need to select SMP_ON_UP explicitly
2016-08-10 8:55 ` Arnd Bergmann
@ 2016-08-10 12:25 ` Linus Walleij
2016-08-10 12:56 ` Vladimir Murzin
0 siblings, 1 reply; 7+ messages in thread
From: Linus Walleij @ 2016-08-10 12:25 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Aug 10, 2016 at 10:55 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Wednesday, August 10, 2016 9:29:11 AM CEST Vladimir Murzin wrote:
>> On 09/08/16 09:44, Shawn Guo wrote:
>> > On Fri, Jul 22, 2016 at 03:56:09PM +0100, Vladimir Murzin wrote:
>> >> SMP_ON_UP is already defaulted to "y" and has all dependencies expressed
>> >> - no need to select it per platform level
>> >>
>> >> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
>> >> ---
>> >>
>> >> This time sent to LAKML
>> >>
>> >> arch/arm/mach-imx/Kconfig | 3 ---
>> >> arch/arm/mach-realview/Kconfig | 1 -
>> >
>> > I cannot take mach-realview changes. I think you need to ether split
>> > the changes, or ask arm-soc folks to apply. In case of the latter, here
>> > is my ACK:
>> >
>> > Acked-by: Shawn Guo <shawnguo@kernel.org>
>>
>> Thanks!
>>
>> RealView is not mentioned under MAINTAINERS, so it'd be easier if
>> arm-soc team pick this patch.
>>
>> Arnd, what is your preference?
>
> Linus Walleij is the person that has sent most patches for realview,
> so I'll let him decide. We can pick it up directly, or he can
> aggregate it with other patches that he might have.
I have queued this with a bunch of other RealView clean-ups and board
file removal patches and will send a pull request for it shortly.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH] ARM: no need to select SMP_ON_UP explicitly
2016-08-10 12:25 ` Linus Walleij
@ 2016-08-10 12:56 ` Vladimir Murzin
2016-08-15 13:22 ` Shawn Guo
0 siblings, 1 reply; 7+ messages in thread
From: Vladimir Murzin @ 2016-08-10 12:56 UTC (permalink / raw)
To: linux-arm-kernel
On 10/08/16 13:25, Linus Walleij wrote:
> On Wed, Aug 10, 2016 at 10:55 AM, Arnd Bergmann <arnd@arndb.de> wrote:
>> On Wednesday, August 10, 2016 9:29:11 AM CEST Vladimir Murzin wrote:
>>> On 09/08/16 09:44, Shawn Guo wrote:
>>>> On Fri, Jul 22, 2016 at 03:56:09PM +0100, Vladimir Murzin wrote:
>>>>> SMP_ON_UP is already defaulted to "y" and has all dependencies expressed
>>>>> - no need to select it per platform level
>>>>>
>>>>> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
>>>>> ---
>>>>>
>>>>> This time sent to LAKML
>>>>>
>>>>> arch/arm/mach-imx/Kconfig | 3 ---
>>>>> arch/arm/mach-realview/Kconfig | 1 -
>>>>
>>>> I cannot take mach-realview changes. I think you need to ether split
>>>> the changes, or ask arm-soc folks to apply. In case of the latter, here
>>>> is my ACK:
>>>>
>>>> Acked-by: Shawn Guo <shawnguo@kernel.org>
>>>
>>> Thanks!
>>>
>>> RealView is not mentioned under MAINTAINERS, so it'd be easier if
>>> arm-soc team pick this patch.
>>>
>>> Arnd, what is your preference?
>>
>> Linus Walleij is the person that has sent most patches for realview,
>> so I'll let him decide. We can pick it up directly, or he can
>> aggregate it with other patches that he might have.
>
> I have queued this with a bunch of other RealView clean-ups and board
> file removal patches and will send a pull request for it shortly.
Thanks!
Shawn, since Linus picked up realview part only do you want me resubmit
remaining imx part?
Cheers
Vladimir
>
> Yours,
> Linus Walleij
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2016-08-15 13:22 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-07-22 14:56 [PATCH] ARM: no need to select SMP_ON_UP explicitly Vladimir Murzin
2016-08-09 8:44 ` Shawn Guo
2016-08-10 8:29 ` Vladimir Murzin
2016-08-10 8:55 ` Arnd Bergmann
2016-08-10 12:25 ` Linus Walleij
2016-08-10 12:56 ` Vladimir Murzin
2016-08-15 13:22 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).