[V2, 10/15] mmc: sdhci-esdhc-imx: enable hw auto retuning for MAN_TUNING

[dongas86@gmail.com (Dong Aisheng)]

On Mon, Aug 15, 2016 at 04:59:41PM +0200, Gary Bisson wrote:
> Dong Aisheng, All,
> 
> On Tue, Jul 12, 2016 at 03:46:19PM +0800, Dong Aisheng wrote:
> > Indicating hw auto retuning support for mx6qdl in the fake caps_1
> > register and enable auto retuning in post_tuning process after
> > tuning completes.
> 
> Have you tried this change with a SDIO3.0 device? I'm asking because a

Tested with SD3.0 device.
Not really for SDIO3.0 device since there's no SDIO3.0 device on my
available MX6Q/DL boards.

> similar change in latest NXP 4.1.15 kernel broke SDIO3.0 support.
> With this tuning, the kernel would report:
> mmc2: Got data interrupt 0x00000002 even though no data operation was in
> progress.
> 

Can you provide the full enumeration log?

> Doing a 'git bisect' and then reverting this patch fixed the issue.
> Although I haven't tested that change on mainline kernel, I wanted you
> to know about this observation before it gets merged.
> 
> As a FYI, the issue has been reported to NXP community:
> https://community.nxp.com/thread/431316
> 

Thanks for nofity.
I will check it on my side.

Regards
Dong Aisheng

> Regards,
> Gary