From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PULL 04/12] KVM: arm64: vgic-its: Make updates to propbaser/pendbaser atomic
Date: Wed, 17 Aug 2016 21:38:51 +0200 [thread overview]
Message-ID: <20160817193859.15726-5-christoffer.dall@linaro.org> (raw)
In-Reply-To: <20160817193859.15726-1-christoffer.dall@linaro.org>
There are two problems with the current implementation of the MMIO
handlers for the propbaser and pendbaser:
First, the write to the value itself is not guaranteed to be an atomic
64-bit write so two concurrent writes to the structure field could be
intermixed.
Second, because we do a read-modify-update operation without any
synchronization, if we have two 32-bit accesses to separate parts of the
register, we can loose one of them.
By using the atomic cmpxchg64 we should cover both issues above.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
---
virt/kvm/arm/vgic/vgic-mmio-v3.c | 26 ++++++++++++++++----------
1 file changed, 16 insertions(+), 10 deletions(-)
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c
index ff668e0..90d8181 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v3.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c
@@ -306,16 +306,19 @@ static void vgic_mmio_write_propbase(struct kvm_vcpu *vcpu,
{
struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
- u64 propbaser = dist->propbaser;
+ u64 old_propbaser, propbaser;
/* Storing a value with LPIs already enabled is undefined */
if (vgic_cpu->lpis_enabled)
return;
- propbaser = update_64bit_reg(propbaser, addr & 4, len, val);
- propbaser = vgic_sanitise_propbaser(propbaser);
-
- dist->propbaser = propbaser;
+ do {
+ old_propbaser = dist->propbaser;
+ propbaser = old_propbaser;
+ propbaser = update_64bit_reg(propbaser, addr & 4, len, val);
+ propbaser = vgic_sanitise_propbaser(propbaser);
+ } while (cmpxchg64(&dist->propbaser, old_propbaser,
+ propbaser) != old_propbaser);
}
static unsigned long vgic_mmio_read_pendbase(struct kvm_vcpu *vcpu,
@@ -331,16 +334,19 @@ static void vgic_mmio_write_pendbase(struct kvm_vcpu *vcpu,
unsigned long val)
{
struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
- u64 pendbaser = vgic_cpu->pendbaser;
+ u64 old_pendbaser, pendbaser;
/* Storing a value with LPIs already enabled is undefined */
if (vgic_cpu->lpis_enabled)
return;
- pendbaser = update_64bit_reg(pendbaser, addr & 4, len, val);
- pendbaser = vgic_sanitise_pendbaser(pendbaser);
-
- vgic_cpu->pendbaser = pendbaser;
+ do {
+ old_pendbaser = vgic_cpu->pendbaser;
+ pendbaser = old_pendbaser;
+ pendbaser = update_64bit_reg(pendbaser, addr & 4, len, val);
+ pendbaser = vgic_sanitise_pendbaser(pendbaser);
+ } while (cmpxchg64(&vgic_cpu->pendbaser, old_pendbaser,
+ pendbaser) != old_pendbaser);
}
/*
--
2.9.0
next prev parent reply other threads:[~2016-08-17 19:38 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-17 19:38 [PULL 00/12] KVM/ARM Fixes for v4.8-rc3 Christoffer Dall
2016-08-17 19:38 ` [PULL 01/12] KVM: arm64: ITS: return 1 on successful MSI injection Christoffer Dall
2016-08-17 19:38 ` [PULL 02/12] KVM: arm64: vgic-its: Handle errors from vgic_add_lpi Christoffer Dall
2016-08-17 19:38 ` [PULL 03/12] KVM: arm64: vgic-its: Plug race in vgic_put_irq Christoffer Dall
2016-08-17 19:38 ` Christoffer Dall [this message]
2016-08-17 19:38 ` [PULL 05/12] KVM: arm64: ITS: move ITS registration into first VCPU run Christoffer Dall
2016-08-17 19:38 ` [PULL 06/12] KVM: arm64: check for ITS device on MSI injection Christoffer Dall
2016-08-17 19:38 ` [PULL 07/12] KVM: arm64: ITS: avoid re-mapping LPIs Christoffer Dall
2016-08-17 19:38 ` [PULL 08/12] KVM: arm/arm64: Change misleading use of is_error_pfn Christoffer Dall
2016-08-17 19:38 ` [PULL 09/12] arm64: Document workaround for Cortex-A72 erratum #853709 Christoffer Dall
2016-08-17 19:38 ` [PULL 10/12] KVM: arm/arm64: timer: Workaround misconfigured timer interrupt Christoffer Dall
2016-08-17 19:38 ` [PULL 11/12] arm64: KVM: remove misleading comment on pmu status Christoffer Dall
2016-08-17 19:38 ` [PULL 12/12] arm64: KVM: report configured SRE value to 32-bit world Christoffer Dall
2016-08-18 10:19 ` [PULL 00/12] KVM/ARM Fixes for v4.8-rc3 Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160817193859.15726-5-christoffer.dall@linaro.org \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).