From mboxrd@z Thu Jan 1 00:00:00 1970 From: andy.gross@linaro.org (Andy Gross) Date: Wed, 17 Aug 2016 16:12:47 -0500 Subject: [PATCH 0/2] Fix Qualcomm 8064/8660 interrupt flags In-Reply-To: <20160817204740.GQ26240@tuxbot> References: <1470386318-17694-1-git-send-email-linus.walleij@linaro.org> <20160817194322.GB18215@hector.attlocal.net> <20160817204740.GQ26240@tuxbot> Message-ID: <20160817211247.GC18215@hector.attlocal.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Aug 17, 2016 at 01:47:40PM -0700, Bjorn Andersson wrote: > On Wed 17 Aug 12:43 PDT 2016, Andy Gross wrote: > > > On Wed, Aug 17, 2016 at 10:56:22AM +0200, Linus Walleij wrote: > > > On Fri, Aug 5, 2016 at 10:38 AM, Linus Walleij wrote: > > > > > > > This came out after some frustration with trying to flag a PM8058 > > > > interrupt line on the APQ8060 (MSM8660) to trigger on falling > > > > edges. It was conflicting badly with predefined contradictory > > > > flags in the device tree for the entire GPIO block. The same > > > > seems to hold for the MPP GPIO IRQs. > > > > > > Andy are you funneling these two patches for fixes? > > > > I looked at these last night. What's the outcome of John's issues with the > > patch not fixing his problem? Do these need to be taken irrespective of his > > plight? > > > > John's issue was that the order of operations was changed in the IRQ > framework, so that upon passing through the set_type() in the TLMM > driver I would overwrite, and hence disable, the chained IRQ handler - > as I should. > > As the PMIC interrupt is chained from the TLMM no interrupts was > delivered. > > > So please move forward with these changes. Ah ok. I'll queue these up. Andy