From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@armlinux.org.uk (Russell King - ARM Linux) Date: Fri, 19 Aug 2016 15:21:45 +0100 Subject: [crypto] [marvell-cesa] Driver hangs on Armada 385 device In-Reply-To: <57B71301.4010005@free-electrons.com> References: <57b6f38c.23012e0a.374a0.56c6@mx.google.com> <20160819141251.5dcc835d@free-electrons.com> <20160819130846.GN1041@n2100.armlinux.org.uk> <57B71301.4010005@free-electrons.com> Message-ID: <20160819142145.GQ1041@n2100.armlinux.org.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Fri, Aug 19, 2016 at 04:09:05PM +0200, Romain Perier wrote: > I was, wondering, do you boot with a separated DTB or a legacy boot > (concatenated to the Image) ? > > > Could you test with uImage.armada-385-db-ap [1], that's a legacy Image. > Also, I have uploaded a minimalistic rootfs [2], if you want. > > 1. http://www.free-electrons.com/~romain/pub/cesa/uImage.armada-385-db-ap > 2. http://www.free-electrons.com/~romain/pub/cesa/rootfs.cpio.xz I assume you mean Thomas rather than myself, as I have only Clearfog platforms, which are all Armada 388. I don't use uImage anymore, except with versions of uboot that are unable to support zImage booting. Where zImage booting is supported, I'm always using a separated DTB. Doing otherwise is insane IMHO. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net.