From: linux@armlinux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] Input: jornada720_ts - get rid of mach/irqs.h include
Date: Fri, 19 Aug 2016 17:40:56 +0100 [thread overview]
Message-ID: <20160819164056.GS1041@n2100.armlinux.org.uk> (raw)
In-Reply-To: <E1bamhR-0004We-61@rmk-PC.armlinux.org.uk>
On Fri, Aug 19, 2016 at 05:31:17PM +0100, Russell King wrote:
> Switch the jornada720 touchscreen driver to obtain its interrupt from
> the platform device, rather than via a hard-coded interrupt number
> obtained from the mach/irqs.h header.
>
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Looking deeper at this driver, this probably isn't an entirely correct
way to go about this, because the interrupt handler does this:
/* If GPIO_GPIO9 is set to high then report pen up */
if (GPLR & GPIO_GPIO(9)) {
so we should be grabbing the GPIO via the gpio layer and testing
the value there.
_However_, having discovered this, along with the interrupt handler
being registered with:
error = devm_request_irq(&pdev->dev, irq, jornada720_ts_interrupt,
IRQF_TRIGGER_RISING,
"HP7XX Touchscreen driver", pdev);
this brings up the question: if the trigger is always a rising edge
on GPIO 9, it is very unlikely that GPLR & GPIO_GPIO(9) will be
false. So how can this code have worked in the first place?
I've checked the history, and I see nothing which changes this state
of affairs back to 2.6.12-rc2.
> ---
> arch/arm/mach-sa1100/jornada720.c | 6 ++++++
> drivers/input/touchscreen/jornada720_ts.c | 10 ++++++----
> 2 files changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
> index 2b96f7bc16bd..010eaea04c69 100644
> --- a/arch/arm/mach-sa1100/jornada720.c
> +++ b/arch/arm/mach-sa1100/jornada720.c
> @@ -228,9 +228,15 @@ static struct platform_device jornada_kbd_device = {
> .resource = jornada_kbd_resources,
> };
>
> +static struct resource jornada_ts_resources[] = {
> + DEFINE_RES_IRQ(IRQ_GPIO9),
> +};
> +
> static struct platform_device jornada_ts_device = {
> .name = "jornada_ts",
> .id = -1,
> + .num_resources = ARRAY_SIZE(jornada_ts_resources),
> + .resource = jornada_ts_resources,
> };
>
> static struct platform_device *devices[] __initdata = {
> diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
> index ea3b6a5b83e6..7e196f8e5661 100644
> --- a/drivers/input/touchscreen/jornada720_ts.c
> +++ b/drivers/input/touchscreen/jornada720_ts.c
> @@ -22,7 +22,6 @@
>
> #include <mach/hardware.h>
> #include <mach/jornada720.h>
> -#include <mach/irqs.h>
>
> MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
> MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
> @@ -101,7 +100,11 @@ static int jornada720_ts_probe(struct platform_device *pdev)
> {
> struct jornada_ts *jornada_ts;
> struct input_dev *input_dev;
> - int error;
> + int error, irq;
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq <= 0)
> + return irq < 0 ? irq : -EINVAL;
>
> jornada_ts = devm_kzalloc(&pdev->dev, sizeof(*jornada_ts), GFP_KERNEL);
> if (!jornada_ts)
> @@ -125,8 +128,7 @@ static int jornada720_ts_probe(struct platform_device *pdev)
> input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0);
> input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0);
>
> - error = devm_request_irq(&pdev->dev, IRQ_GPIO9,
> - jornada720_ts_interrupt,
> + error = devm_request_irq(&pdev->dev, irq, jornada720_ts_interrupt,
> IRQF_TRIGGER_RISING,
> "HP7XX Touchscreen driver", pdev);
> if (error) {
> --
> 2.1.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.
next prev parent reply other threads:[~2016-08-19 16:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-19 16:31 [PATCH] Input: jornada720_ts - get rid of mach/irqs.h include Russell King
2016-08-19 16:39 ` Dmitry Torokhov
2016-08-19 16:40 ` Russell King - ARM Linux [this message]
2016-08-19 16:52 ` Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160819164056.GS1041@n2100.armlinux.org.uk \
--to=linux@armlinux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).