From: dmitry.torokhov@gmail.com (Dmitry Torokhov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] Input: jornada720_ts - get rid of mach/irqs.h include
Date: Fri, 19 Aug 2016 09:52:30 -0700 [thread overview]
Message-ID: <20160819165230.GC20499@dtor-ws> (raw)
In-Reply-To: <20160819164056.GS1041@n2100.armlinux.org.uk>
On Fri, Aug 19, 2016 at 05:40:56PM +0100, Russell King - ARM Linux wrote:
> On Fri, Aug 19, 2016 at 05:31:17PM +0100, Russell King wrote:
> > Switch the jornada720 touchscreen driver to obtain its interrupt from
> > the platform device, rather than via a hard-coded interrupt number
> > obtained from the mach/irqs.h header.
> >
> > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
>
> Looking deeper at this driver, this probably isn't an entirely correct
> way to go about this, because the interrupt handler does this:
>
> /* If GPIO_GPIO9 is set to high then report pen up */
> if (GPLR & GPIO_GPIO(9)) {
>
> so we should be grabbing the GPIO via the gpio layer and testing
> the value there.
>
> _However_, having discovered this, along with the interrupt handler
> being registered with:
>
> error = devm_request_irq(&pdev->dev, irq, jornada720_ts_interrupt,
> IRQF_TRIGGER_RISING,
> "HP7XX Touchscreen driver", pdev);
>
> this brings up the question: if the trigger is always a rising edge
> on GPIO 9, it is very unlikely that GPLR & GPIO_GPIO(9) will be
> false. So how can this code have worked in the first place?
>
> I've checked the history, and I see nothing which changes this state
> of affairs back to 2.6.12-rc2.
That would be question for Kristoffer; I have never had this hardware...
I'll hold off on this patch for now...
>
> > ---
> > arch/arm/mach-sa1100/jornada720.c | 6 ++++++
> > drivers/input/touchscreen/jornada720_ts.c | 10 ++++++----
> > 2 files changed, 12 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
> > index 2b96f7bc16bd..010eaea04c69 100644
> > --- a/arch/arm/mach-sa1100/jornada720.c
> > +++ b/arch/arm/mach-sa1100/jornada720.c
> > @@ -228,9 +228,15 @@ static struct platform_device jornada_kbd_device = {
> > .resource = jornada_kbd_resources,
> > };
> >
> > +static struct resource jornada_ts_resources[] = {
> > + DEFINE_RES_IRQ(IRQ_GPIO9),
> > +};
> > +
> > static struct platform_device jornada_ts_device = {
> > .name = "jornada_ts",
> > .id = -1,
> > + .num_resources = ARRAY_SIZE(jornada_ts_resources),
> > + .resource = jornada_ts_resources,
> > };
> >
> > static struct platform_device *devices[] __initdata = {
> > diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
> > index ea3b6a5b83e6..7e196f8e5661 100644
> > --- a/drivers/input/touchscreen/jornada720_ts.c
> > +++ b/drivers/input/touchscreen/jornada720_ts.c
> > @@ -22,7 +22,6 @@
> >
> > #include <mach/hardware.h>
> > #include <mach/jornada720.h>
> > -#include <mach/irqs.h>
> >
> > MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
> > MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
> > @@ -101,7 +100,11 @@ static int jornada720_ts_probe(struct platform_device *pdev)
> > {
> > struct jornada_ts *jornada_ts;
> > struct input_dev *input_dev;
> > - int error;
> > + int error, irq;
> > +
> > + irq = platform_get_irq(pdev, 0);
> > + if (irq <= 0)
> > + return irq < 0 ? irq : -EINVAL;
> >
> > jornada_ts = devm_kzalloc(&pdev->dev, sizeof(*jornada_ts), GFP_KERNEL);
> > if (!jornada_ts)
> > @@ -125,8 +128,7 @@ static int jornada720_ts_probe(struct platform_device *pdev)
> > input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0);
> > input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0);
> >
> > - error = devm_request_irq(&pdev->dev, IRQ_GPIO9,
> > - jornada720_ts_interrupt,
> > + error = devm_request_irq(&pdev->dev, irq, jornada720_ts_interrupt,
> > IRQF_TRIGGER_RISING,
> > "HP7XX Touchscreen driver", pdev);
> > if (error) {
> > --
> > 2.1.0
> >
> >
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel at lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
> --
> RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
> FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
> according to speedtest.net.
--
Dmitry
prev parent reply other threads:[~2016-08-19 16:52 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-19 16:31 [PATCH] Input: jornada720_ts - get rid of mach/irqs.h include Russell King
2016-08-19 16:39 ` Dmitry Torokhov
2016-08-19 16:40 ` Russell King - ARM Linux
2016-08-19 16:52 ` Dmitry Torokhov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160819165230.GC20499@dtor-ws \
--to=dmitry.torokhov@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).