From: thierry.reding@gmail.com (Thierry Reding)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 08/12] arm64: dts: tegra: Add Tegra186 support
Date: Fri, 19 Aug 2016 19:32:29 +0200 [thread overview]
Message-ID: <20160819173233.13260-9-thierry.reding@gmail.com> (raw)
In-Reply-To: <20160819173233.13260-1-thierry.reding@gmail.com>
From: Joseph Lo <josephl@nvidia.com>
This adds the initial support of Tegra186 SoC. It provides enough to
enable the serial console and boot from an initial ramdisk.
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 86 ++++++++++++++++++++++++++++++++
1 file changed, 86 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra186.dtsi
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
new file mode 100644
index 000000000000..53b89b1c1e1f
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -0,0 +1,86 @@
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/tegra186-hsp.h>
+
+/ {
+ compatible = "nvidia,tegra186";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ uarta: serial at 03100000 {
+ compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart";
+ reg = <0x0 0x03100000 0x0 0x40>;
+ reg-shift = <2>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller at 03881000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x03881000 0x0 0x1000>,
+ <0x0 0x03882000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ interrupt-parent = <&gic>;
+ };
+
+ hsp_top0: hsp at 03c00000 {
+ compatible = "nvidia,tegra186-hsp";
+ reg = <0x0 0x03c00000 0x0 0xa0000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "doorbell";
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ sysram at 30000000 {
+ compatible = "nvidia,tegra186-sysram", "mmio-ram";
+ reg = <0x0 0x30000000 0x0 0x4ffff>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0 0x0 0x0 0x30000000 0x0 0x4ffff>;
+
+ cpu_bpmp_tx: bpmp_shmem at 4e000 {
+ compatible = "nvidia,tegra186-bpmp-shmem";
+ reg = <0x0 0x4e000 0x0 0x1000>;
+ };
+
+ cpu_bpmp_rx: bpmp_shmem at 4f000 {
+ compatible = "nvidia,tegra186-bpmp-shmem";
+ reg = <0x0 0x4f000 0x0 0x1000>;
+ };
+ };
+
+ bpmp: bpmp {
+ compatible = "nvidia,tegra186-bpmp";
+ mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB
+ TEGRA_HSP_DB_MASTER_BPMP>;
+ shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+
+ bpmp_i2c: i2c {
+ compatible = "nvidia,tegra186-bpmp-i2c";
+ nvidia,bpmp = <&bpmp>;
+ nvidia,bpmp-bus-id = <5>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&gic>;
+ };
+};
--
2.9.0
next prev parent reply other threads:[~2016-08-19 17:32 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-19 17:32 [PATCH v3 00/12] Initial Tegra186 support Thierry Reding
2016-08-19 17:32 ` [PATCH v3 01/12] dt-bindings: mailbox: Add Tegra HSP binding Thierry Reding
2016-08-19 17:32 ` [PATCH v3 02/12] mailbox: Add Tegra HSP driver Thierry Reding
2016-08-22 13:43 ` Arnd Bergmann
2016-08-22 14:17 ` Thierry Reding
2016-08-22 16:42 ` Stephen Warren
2016-08-22 16:53 ` Stephen Warren
2016-08-23 0:06 ` Sivaram Nair
2016-08-23 0:12 ` Sivaram Nair
2016-08-19 17:32 ` [PATCH v3 03/12] dt-bindings: firmware: Add bindings for Tegra BPMP Thierry Reding
2016-08-19 17:32 ` [PATCH v3 04/12] firmware: tegra: Add IVC library Thierry Reding
2016-08-22 10:46 ` Jon Hunter
2016-08-22 12:40 ` Thierry Reding
2016-08-22 18:49 ` Stephen Warren
2016-08-24 15:13 ` Jon Hunter
2016-08-19 17:32 ` [PATCH v3 05/12] firmware: tegra: Add BPMP support Thierry Reding
2016-08-22 9:26 ` Jon Hunter
2016-08-22 12:54 ` Thierry Reding
2016-08-22 14:24 ` Jon Hunter
2016-08-22 15:00 ` Thierry Reding
2016-08-22 18:51 ` Stephen Warren
2016-08-22 13:34 ` Arnd Bergmann
2016-08-22 14:02 ` Thierry Reding
2016-08-22 14:42 ` Arnd Bergmann
2016-08-22 15:32 ` Thierry Reding
2016-08-22 15:43 ` Arnd Bergmann
2016-08-22 18:56 ` Stephen Warren
2016-08-23 14:58 ` Arnd Bergmann
2016-08-22 22:23 ` Stephen Warren
2016-08-23 23:26 ` Sivaram Nair
2016-08-19 17:32 ` [PATCH v3 06/12] soc/tegra: Add Tegra186 support Thierry Reding
2016-08-22 19:01 ` Stephen Warren
2016-08-23 13:44 ` Jon Hunter
2016-08-19 17:32 ` [PATCH v3 07/12] arm64: defconfig: Enable Tegra186 SoC Thierry Reding
2016-08-22 19:01 ` Stephen Warren
2016-08-19 17:32 ` Thierry Reding [this message]
2016-08-22 17:11 ` [PATCH v3 08/12] arm64: dts: tegra: Add Tegra186 support Stephen Warren
2016-08-22 19:07 ` Stephen Warren
2016-08-19 17:32 ` [PATCH v3 09/12] arm64: dts: tegra: Add NVIDIA P3310 main board support Thierry Reding
2016-08-22 19:08 ` Stephen Warren
2016-08-23 17:35 ` Jon Hunter
2016-08-19 17:32 ` [PATCH v3 10/12] arm64: dts: tegra: Add NVIDIA P2771 " Thierry Reding
2016-08-22 19:11 ` Stephen Warren
2016-08-19 17:32 ` [PATCH v3 11/12] clk: tegra: Add BPMP clock driver Thierry Reding
2016-08-22 10:11 ` Jon Hunter
2016-08-22 13:28 ` Thierry Reding
2016-08-23 13:49 ` Jon Hunter
2016-08-22 19:47 ` Stephen Warren
2016-08-19 17:32 ` [PATCH v3 12/12] reset: Add Tegra BPMP reset driver Thierry Reding
2016-08-22 19:56 ` Stephen Warren
2016-11-26 13:39 ` [PATCH v3 00/12] Initial Tegra186 support Pavel Machek
2016-11-28 7:33 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160819173233.13260-9-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).