[PATCH v2 7/7] musb: sunxi: Add support for platform_set_mode

[b-liu@ti.com (Bin Liu)]

Hi,

On Mon, Aug 15, 2016 at 09:21:32PM +0200, Hans de Goede wrote:
> This allows run-time dr_mode switching support via the "mode" musb
> sysfs attribute.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  drivers/usb/musb/sunxi.c | 52 ++++++++++++++++++++++++++++++++++++++++++++----
>  1 file changed, 48 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
> index c6ee166..1fe7451 100644
> --- a/drivers/usb/musb/sunxi.c
> +++ b/drivers/usb/musb/sunxi.c
> @@ -74,6 +74,7 @@
>  #define SUNXI_MUSB_FL_HAS_SRAM			5
>  #define SUNXI_MUSB_FL_HAS_RESET			6
>  #define SUNXI_MUSB_FL_NO_CONFIGDATA		7
> +#define SUNXI_MUSB_FL_PHY_MODE_PEND		8
>  
>  /* Our read/write methods need access and do not get passed in a musb ref :| */
>  static struct musb *sunxi_musb;
> @@ -87,6 +88,7 @@ struct sunxi_glue {
>  	struct phy		*phy;
>  	struct platform_device	*usb_phy;
>  	struct usb_phy		*xceiv;
> +	enum phy_mode		phy_mode;
>  	unsigned long		flags;
>  	struct work_struct	work;
>  	struct extcon_dev	*extcon;
> @@ -140,6 +142,9 @@ static void sunxi_musb_work(struct work_struct *work)
>  			clear_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags);
>  		}
>  	}
> +
> +	if (test_and_clear_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags))
> +		phy_set_mode(glue->phy, glue->phy_mode);
>  }
>  
>  static void sunxi_musb_set_vbus(struct musb *musb, int is_on)
> @@ -341,6 +346,41 @@ static void sunxi_musb_dma_controller_destroy(struct dma_controller *c)
>  {
>  }
>  
> +static int sunxi_musb_set_mode(struct musb *musb, u8 mode)
> +{
> +	struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent);
> +	enum phy_mode new_mode;
> +
> +	switch (mode) {
> +	case MUSB_HOST:		new_mode = PHY_MODE_USB_HOST; break;
> +	case MUSB_PERIPHERAL:	new_mode = PHY_MODE_USB_DEVICE; break;
> +	case MUSB_OTG:		new_mode = PHY_MODE_USB_OTG; break;

Please fix the code style as commented in patch 4/7.

> +	default:
> +		dev_err(musb->controller->parent,
> +			"Error requested mode not supported by this kernel\n");
> +		return -EINVAL;
> +	}
> +
> +	if (glue->phy_mode == new_mode)
> +		return 0;
> +
> +	if (musb->port_mode != MUSB_PORT_MODE_DUAL_ROLE) {
> +		dev_err(musb->controller->parent,
> +			"Error changing modes is only supported in dual role mode\n");
> +		return -EINVAL;
> +	}
> +
> +	/*
> +	 * phy_set_mode may sleep, and we're called with a spinlock held,
> +	 * so let sunxi_musb_work deal with it.
> +	 */
> +	glue->phy_mode = new_mode;
> +	set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags);
> +	schedule_work(&glue->work);

When switching from host to peripheral mode, if an usb device is still
plugged and enumerated, how do you handle the device disconnect?

Regards,
-Bin.

> +
> +	return 0;
> +}
> +
>  /*
>   * sunxi musb register layout
>   * 0x00 - 0x17	fifo regs, 1 long per fifo
> @@ -568,6 +608,7 @@ static const struct musb_platform_ops sunxi_musb_ops = {
>  	.writew		= sunxi_musb_writew,
>  	.dma_init	= sunxi_musb_dma_controller_create,
>  	.dma_exit	= sunxi_musb_dma_controller_destroy,
> +	.set_mode	= sunxi_musb_set_mode,
>  	.set_vbus	= sunxi_musb_set_vbus,
>  	.pre_root_reset_end = sunxi_musb_pre_root_reset_end,
>  	.post_root_reset_end = sunxi_musb_post_root_reset_end,
> @@ -614,21 +655,28 @@ static int sunxi_musb_probe(struct platform_device *pdev)
>  		return -EINVAL;
>  	}
>  
> +	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
> +	if (!glue)
> +		return -ENOMEM;
> +
>  	memset(&pdata, 0, sizeof(pdata));
>  	switch (usb_get_dr_mode(&pdev->dev)) {
>  #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_HOST
>  	case USB_DR_MODE_HOST:
>  		pdata.mode = MUSB_PORT_MODE_HOST;
> +		glue->phy_mode = PHY_MODE_USB_HOST;
>  		break;
>  #endif
>  #if defined CONFIG_USB_MUSB_DUAL_ROLE || defined CONFIG_USB_MUSB_GADGET
>  	case USB_DR_MODE_PERIPHERAL:
>  		pdata.mode = MUSB_PORT_MODE_GADGET;
> +		glue->phy_mode = PHY_MODE_USB_DEVICE;
>  		break;
>  #endif
>  #ifdef CONFIG_USB_MUSB_DUAL_ROLE
>  	case USB_DR_MODE_OTG:
>  		pdata.mode = MUSB_PORT_MODE_DUAL_ROLE;
> +		glue->phy_mode = PHY_MODE_USB_OTG;
>  		break;
>  #endif
>  	default:
> @@ -638,10 +686,6 @@ static int sunxi_musb_probe(struct platform_device *pdev)
>  	pdata.platform_ops	= &sunxi_musb_ops;
>  	pdata.config		= &sunxi_musb_hdrc_config;
>  
> -	glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL);
> -	if (!glue)
> -		return -ENOMEM;
> -
>  	glue->dev = &pdev->dev;
>  	INIT_WORK(&glue->work, sunxi_musb_work);
>  	glue->host_nb.notifier_call = sunxi_musb_host_notifier;
> -- 
> 2.7.4
>